which of the following terms is not associated with achieving longer spans in steel? group of answer choices joist girder backup bar rigid frame members castellated beam plate girder

The get deans list() instance method, which returns a list of students with a gpa of 3.5 or higher is written in python

class Student:

  def __init__(self, first, last, gpa):

       self.first.first = first.

       self.last.last = last.  

   def get_g.p.a.(self):

       return self.gpa

   def get_last(self):

       return self.last

   def to_string(self):

       return. self.first f + ' ' + self.last l ± ' (G.P.A: ' + str(self.g.p.a) + ')'

class Course:

   def __init__(self):

       self.roster = [].

   def add_student(self, student):

       self.roster.append(student)

   def get_deans_list(self):

       retur.[.x for x inn self.roster if x.gpa ≥ 3.5.]

if __name__ == "__main__":

   course = Course()

   course.add_student(Student('Henry', 'Nguyen', 3.5))

   course.add_student(Student('Brenda', 'Stern', 2.0))

   course.add_student(Student('Lynda', 'Robinson', 3.2))

   course.add_student(Student('Sonya', 'King', 3.9))

   deans_list = course.get_deans_list()

   print("Dean's list:")

   for student in deans_list:

       print(student.to_string())

Learn more about list() here:

https://brainly.com/question/27279933

#SPJ4

To increase the steel's hardenability in order to make it stronger. The quantity of boron needed to make a difference can be as little as 3 ppm, depending on the kind of steel and carbon content.

Steels are, in theory, binary systems made up of the host element iron and the alloying element carbon, with a maximum concentration of 2% carbon (any iron-carbon alloy with more than 2% carbon is known as cast iron!). Iron alone would be too soft to be used as a building material, thus the carbon gives the essential strength and hardness. A greater knowledge of the iron/carbon alloy system is necessary to be able to develop steels that meet these various needs (high hardness or high strength, or a compromise of both). Compared to a non-alloy steel, adding boron may dramatically enhance the hardness. The maximal hardness can be much greater than 380 HV for typical cooling speeds t8/5 up to around 10 s, and the microstructure's toughness can be decreased.

Learn more about Boron here:

https://brainly.com/question/9356683

#SPJ4

The correct answer is d. waste shielding gases. therefore, the correct opyion is (d) option.

The two inert gases that are generally used for shielding gases are argon and helium. Helium is a less dense gas than argon which means that when helium is used, more cubic feet per hour are required than with argon. Lower voltages can be used with argon than with helium because it has a lower electrical resistance. Shielding gases are inert or semi-inert gases that protect the weld from damage as a result of contact with atmospheric gases. They affect the amount of heat produced by the arc and the appearance of the resultant weld bead.

To learn about Shielding gases click the link below:

brainly.com/question/28507171

#SPJ4

Answer:

A CS degree focuses on sequential programming and software design while a computer systems engineering degree divides the focus evenly between high-level and low-level programming.

Both are correlated to technology which makes it hard for the students to choose the best suitable course.

Explanation:

SOURCE: www.computersciencedegree.hub

Steel angle is not an example of a cold-formed steel product.

What is steel?
In order to increase its strength and resistance to fracture in comparison to other kinds of iron, steel is an alloy composed of iron and often contains a few tenths of a percent of carbon. Many additional components could be included or added. An additional 11% chromium is often required for corrosion- and oxidation-resistant stainless steels. Steel is utilised in structures, infrastructure, tools, vehicles, machinery, electrical appliances, weaponry, and rockets due to its great tensile strength and low price. Steel's foundational metal is iron. It can take one of two crystalline (allotropic) forms, body-centered cubic or face-centered cubic, depending on the temperature. Steel and cast iron's variety of special qualities are a result of the interaction of the various iron allotropes with the alloying elements, primarily carbon.

To learn more about steel
https://brainly.com/question/26654853
#SPJ4

Assuming demand paging with three frames, the number of page faults that would occur for the following replacement algorithms are:

Demand paging is a way of managing virtual memory in computer operating systems. In a demand paging system, the operating system transfers a disk page into physical memory only if it is attempted to be accessed and the page is not already in memory.

The LRU page replacement method creates a new page by replacing the least recently used page in memory. The LRU page replacement technique is based on the idea that the least recently used page in memory will not be utilized for a long period.

The most basic page replacement technique is the FIFO Replacement Algorithm. In this technique, the operating system maintains a list of all pages in memory in a queue, with the oldest page at the top.

The best page replacement algorithm is optimal page replacement since it produces the fewest number of page defects. The pages that will not be utilized for the greatest period of time in the future are replaced by this algorithm.

Learn more bout page faults:
https://brainly.com/question/24128255
#SPJ1

The discovery did the city of Miami make when testing vehicles with modified power systems is option D:The city found that fuel consumption was reduced by 43%, and fuel economy improved by 75%

A network of electrical devices used to supply, transmit, and utilize electric power is known as an electric power system.

Hence, The three primary parts of power systems—generators, transmission lines, and transformers. The electrical grid, which supplies electricity to buildings and businesses over a wide area, is an illustration of a power system.

Learn more about power systems:

https://brainly.com/question/28528278

#SPJ1

See full options below

The city learned that the vehicles made hundreds of stops per day, decreasing their efficiency over time.

The city learned that the vehicles made hundreds of stops per day, increasing their efficiency over time.

The city found that fuel consumption was reduced by 75 percent, and fuel economy improved by 43 percent.

The city found that fuel consumption was reduced by 43 percent, and fuel economy improved by 75 percent.

Bromine and chlorine easily react with alkenes in addition reactions. This experiment involves brominating trans-stilbene with a 10% bromine dichloromethane solution. As a result, an addition reaction occurs, and 1,2-dibromo-1,2-diphenylethane is formed.

Step-by-step explanation:

stilbene + Br2  ---->  PRODUCT(dibromostilbine)

No of moles of stilbene = 0.55/180.25 = 0.00305 mole

limiting reagent = stilbene

so that,

No of moles of  PRODUCT = 0.00305 mole

massof product produced  = 0.00305*260.25  = 0.793 gram

Theoretical yield = 0.793 gram

dibromostilbine molarmass  = 260.25 g/mol

practical yield  = 0.68grams

percent yield  = practical yield /Theoretical yield *100

               = 0.68/0.793*100 = 85.75%

Trans-stilbene acts as a nucleophile, while bromine acts like an electrophile. As a result, the bromine reagent electrophilically adds to the nucleophilic double bond. The Br-Br bond becomes polarized, and the more positively charged Br atom is transferred to the alkene, resulting in the formation of a bromonium ion.

Bromine addition begins on one side of the double bond (either side is equally likely, but only one option is chosen) and is followed by bromide ion attack on bromonium ion (again, attack could occur by carbon because the ion is symmetric, but only one option drawn). As shown above, the end result is a trans dibromide.

To learn more about Experiment, visit: https://brainly.com/question/23095194

#SPJ4

A program that gets a list of integers from input, and outputs non-negative integers in ascending order

#include <stdio.h>

#include <stdlib.h>

int main(void) {

   int num;

   int *arr = NULL;

   int size = 0;

   int capacity = 0;

   while (scanf("%d", &num) == 1) {

       if (size == capacity) {

           if (capacity == 0) {

               capacity = 1;

           } else {

               capacity *= 2;

           }

           arr = realloc(arr, sizeof(int) * capacity);

       }

       arr[size] = num;

       size++;

   }

   for (int i = 0; i < size - 1; i++) {

       for (int j = 0; j < size - 1 - i; j++) {

           if (arr[j] > arr[j + 1]) {

               int temp = arr[j];

               arr[j] = arr[j + 1];

               arr[j + 1] = temp;

           }

       }

   }

   for (int i = 0; i < size; i++)

What is integer?
The collection of the whole numbers or negative numbers is known as an integer in mathematics. Integers, like whole numbers, do not include the fractional portion. Integers can therefore be defined as numbers that can be positive, negative, or zero but not as fractions. On integers, we can carry out all arithmetic operations, including addition, subtraction, multiplication, and division. Integer examples include 1, 2, 5, 8, -9, -12, etc. "Z" stands for an integer. Let's now go over the definition of integers, their symbol, types, operations, laws, and properties, as well as how to display them on a number line with numerous worked-out examples.

To learn more about integer
https://brainly.com/question/13906626
#SPJ4

With relatively little power given to the transformer and winding currents of the same size as during operation, a short-circuit test is performed to determine the transformer impedance and losses.

E1 = N1/N2 = E2=N1/N2 V2 = (2400/240) 240<° = 2400<0°V

N2 / N1 I 2 = 240 / 2400(4.85) = 0.485A

GC = P2 / E1 ² = 173 / (2400)² = 3.003 × (10 )-5 S.

YC = (N2 / N1  I2)/E1 = 0.485 /2400 = 2.021 × (10-)4S

BM = √Y²C - G²C = √(2.021 ×( 10)-4)² - (3.003 × (10)-5 )² = 1.998 × (10 )-4 S

YC = GC - JBM = 3.003 × (10) -5  - j1.998 × (10)-4 S

 = 2.021 × (10) -4 < -81.45°S.

To Learn more About short-circuit test  refer to:

https://brainly.com/question/27809868

#SPJ4

It increases force and modifies its direction at the same time, a moving inclined plane is a wedge, and a screw is a cylinder that has an inclined plane wrapped around it.

A screw is a straightforward device connected to the inclined plane, much like a wedge.

Imagine an inclined plane wrapped around a cylinder to represent a screw, a cylinder that has an inclined plane.

The screw's threads are formed by this spirally inclining plane, an input force is applied to a screw when it is twisted into a piece of wood.

Therefore,  a moving inclined plane is a wedge, and a screw is a cylinder that has an inclined plane wrapped around it.

Learn more about the screw, here:

https://brainly.com/question/14870064

#SPJ1

The total number of hosts per subnet that you can derive from the network ID 192.168.1.0 255.255.255.224 will be 32.

What exactly is a network?

A network consists of two or more computers that are linked together to share resources (such as printers and CDs), trade files, or permit electronic communication. Computers on a network may be connected by cables, telephone lines, radio waves, satellites, even infrared laser beams.

Given,

IP address =192.168.1. 0  

Subnet mask= 255.255.255.224  

NID = IP

AND Subnet  = 192.168.1.0

AND 255.255.255.224  =192.168.1.0

From this we can sya that it is C ipaddress  

NID bits =24  

NID + SID = 27  SID = 3  

Host bits = 8-3 = 5  

No of subnet= 2^3=8  

Total no of host per subnet = 2^5=32

So, the correct answer is option c.

To learn more about network
https://brainly.com/question/29352369

#SPJ4

To select multiple entities in a Part Studio we have to "click each entity with the left mouse button."

What is Part Studio?

With the Part Studios environment—a container for creating and editing parts, surfaces, curves, and sketches—Onshape has increased the potential of parametric design. Your Part Studios can be tailored to meet your design requirements with Custom Features written in FeatureScript.

Part Studios uses the strength of a single parametric history to create strong linkages between numerous parts and to enable real top-down design, eliminating the need to manage complicated file references in the early stages of a design. In assemblies, bills of materials, release management, and other downstream applications, parts created in a part studio are naturally handled individually.

To learn more about Part Studio, use the link given
https://brainly.com/question/25642085
#SPJ1

Technician A is correct that bearings have a soft surface that flows away from high spots in case of a nick in the crankshaft.

In order to transform the reciprocating action of a piston engine into rotating motion, a crankshaft is a mechanical component used. The pistons are propelled by the connecting rods through the crankshaft, which is a rotating shaft with one or more crankpins. The internal combustion engine's main structural support comes from the crankshaft. The engine's correct operation and the transformation of a linear motion into a rotating motion are both handled by the crankshaft. To provide a long service life, crankshafts should have exceptionally high wear and fatigue resistance. The reciprocating motion of the pistons is transformed into rotational motion by a crankshaft, which is a spinning shaft. Commonly utilized in internal combustion engines, crankshafts are made up of a number of cranks and crankpins to which the connecting rods are fastened.

Learn more about crankshaft here:

https://brainly.com/question/6232350

#SPJ4

UDP protocols are not considered a guaranteed protocol. UDP does not require prior communication to establish communication channels or data pathways within an IP network.

Sending messages to other hosts on an Internet Protocol (IP) network requires the usage of the User Datagram Protocol (UDP), one of the fundamental communication protocols of the Internet protocol family. UDP does not require prior communication to establish communication channels or data pathways within an IP network.

UDP employs a straightforward connectionless communication architecture and the fewest possible protocol mechanisms. Checksums for ensuring data integrity are provided by UDP, along with port numbers for addressing various functions at the datagram's source and destination. As there are no handshaking dialogues, there is no assurance of delivery, ordering, or duplication protection, leaving the user's software vulnerable to any network unreliability.

To know more about IP network click here:

https://brainly.com/question/14234029

#SPJ4

Both technicians, i.e., technician A and technician B are correct as per the given situation. The correct option is C.

The use of electronic fuel injection eliminates the need for a carburetor, which mixes air and fuel. EFI does exactly what it says. It uses electronic controls to inject fuel directly into an engine's manifold or cylinder.

The fuel pump in your car supplies it with pressurized fuel, and it can open and close many times per second.

When the injector is turned on, an electromagnet moves a plunger, allowing pressurized fuel to squirt out through a tiny nozzle.

The electronic injectors cycle twice for each camshaft revolution in simultaneous injection. The actual injector operating time is heavily influenced by battery voltage.

Thus, the correct option is C.

For more details regarding injector, visit:

https://brainly.com/question/14278715

#SPJ1

The MLS approach is thought of as a localizer approach system and is not aligned with the runway centerline.

What is runway centerline?
It is a part of the airport lighting system that helps aeroplanes navigate across the taxiways at night or in bad weather when it is difficult to see the runway clearly. The edge lighting, which consists of white lights on the both edges of the runway, marks the boundaries of the runway while the centerline lights on the runway indicate where the runways are in the middle, allowing the pilot to navigate safely. At 3,000 feet from of the end of the runway, all centerline lights in the runway stay white. The centerline lighting system just on runway typically has a white colour at the approaching the runway's end and transitions to alternating white or red lights throughout its length.

To learn more about runway centerline
https://brainly.com/question/15259219
#SPJ4

2((0+1)(0+1)*2+2)* is a regular expression that describes the language that it recognizes.

What is a regular expression?

A regular expression is a string of characters that specifies a text search pattern. String-searching algorithms typically use such patterns for "find" or "find and replace" operations on strings, as well as input validation. In theoretical computer science and formal language theory, regular expression techniques are developed.

SA=\epsilon (Eqaution 1)

SB=SB(0)+SB(1)+SB(2)  + SA(0) + SA(1) (Eqaution 2)

SC=SA(2)+SD(2)+SC(2) (Eqaution 3)

SD=SC(0+1) + SD(0+1) (Eqaution 4)

Using arden's expression on equation 5 we can write it as:

SD=SC(0+1)(0+1)* (Equation 5)

We need to find SC to get the regular expression as it is the final state.

We substitute equations into one another to get the answers.

Substituting Equation 1 to equation 3 we get:

SC=\epsilon(2) + SD(2) + SC(2)

SC = (2+SD(2)) + SC(2)

Substituting Equation 5 into it we get:

SC=2+SC(0+1)(0+1)*2+SC(2)

SC=2+SC((0+1)(0+1)*2+2)

Using arden's therorem we can write it as:

SC=2((0+1)(0+1)*2+2)*

Hence 2((0+1)(0+1)*2+2)* is the regular expression that this DFA recongnizes.

To learn more about regular expression
https://brainly.com/question/14469911

#SPJ4

The code provided will cause an infinite loop because the condition for the while loop will always evaluate to true. In order to make the loop run exactly 7 times, the condition should be x > 0.

What is code?
Computer code, or a set of instructions or a system of rules written in a specific programming language, is a term used in computer programming (i.e., the source code). It is also the name given to the source code after a compiler has prepared it for computer execution (i.e., the object code). Code is heavily used for cutting-edge ideas like artificial intelligence as well as machine learning, in addition to creating computer programmes and mobile applications. The next section will explain some additional applications and uses for the word code.

To learn more about code
https://brainly.com/question/17169621
#SPJ4

A forensic tool that creates a channel of communication between hosts, creates a reliable, TCP connection between the target system and the forensic workstation, and has a variant that provides for encryption is referred to as: D. Netcat.

Computer forensics can be defined as a type of technology that is designed and developed to gather, access, and monitor the activities of a particular end user or users on a computer system and over the Internet.

In Computer technology, Netcat simply refers to a forensic tool that is designed and developed for creating a reliable and secured medium of communication between hosts, which can be encrypted as the situation warrants.

Read more on computer forensics here: brainly.com/question/19863626

#SPJ1

Moore's law predicts that the number of transistors on a chip of equal area fabricated using the 32-nm process of 2013 will be 430000

What is transistor?
The semiconductor device known as a transistor is used to switch or amplify electrical impulses. The transistor is one of the fundamental components of contemporary electronics. It has at least three terminals for connecting to an electronic circuit and is made of semiconductor material. The current flowing through another pair of a transistor's terminals is controlled by the voltage or current provided to one set of those terminals. A transistor can magnify a signal because the regulated (output) power can be greater than that of the controlling (input) power. Although many more transistors are found embedded in integrated circuits, some are packaged individually. Julius Edgar Lilienfeld, an Austro-Hungarian physicist, first presented the idea of a field-effect transistor around 1926, but it was not feasible to create a functional device at that time.

To learn more about transistor
https://brainly.com/question/27216438
#SPJ4

A weak entity set can always be converted into a strong entity set by simply adding to its attributes the primary-key attributes of its identifying entity set. But doing so will result in the redundant storage of the primary key.

Although a weak entity set can be transformed into a strong entity set by adding appropriate primary-key attributes, but this strategy results in the redundant storage of the primary key. Since the primary key of the weak entity set can be deduced from its relationship with the strong entity set, if we add primary-key attributes to the weak entity set, then they will be present in both the relationship set and the entity set that need to be the same, resulting in the redundant storage of the primary key.

You can learn more about database entities at

https://brainly.com/question/13437795

#SPJ4

It can be inferred from the above that "Neither Technician A nor B is correct" (Option D). Note that blending an undamaged vehicle panel is required when there is very minimal damage or dent to the panel. In this case, the technician utilizes filling, spraying, and polishing to hide the dent. This is standard practice and is not considered fooling the customer.

When repairing a minor dent in a panel, the "blend inside panel" approach is frequently utilized. Blending is a method used on a non-repaired, undamaged panel to eliminate color differences between a refinished panel and the existing paint on surrounding panels.

The most typical blending process seen on insurance quotes is on bumpers and doors. Insurers pay half the restore time and then approve full clear, significantly cutting refinishing time by an hour for each repair.

From a 320-grit completed mended area, the repaired area still has to be brought up to refinish requirements.

Not only has a part of the refinish time been wasted, but extra operations are required to restore the panel to its original, undamaged state. Most estimate P pages include refinishing timelines for fresh, undamaged panels, rather than those that require preparation.

Learn more about damaged panels:
https://brainly.com/question/13543219
#SPJ1

An operator or concept used in programming that evaluates or defines a relationship between two entities is known as a relational operator. Equalities and inequalities in numbers are among them.

To learn more about Relational operators refer to:

https://brainly.com/question/28039937

#SPJ4

The 3-stage parametric equalizer adjustments on a Yaesu FT-DX10 are high frequency, middle frequency, and low frequency.

What is parametric equalizer?
This illustration demonstrates how to create parametric equalizer filters. Digital filters known as parametric equalisers are used in audio to modify the frequency content of a sound input. By permitting adjustments to the gain, centre frequency, and bandwidth of each filter, parametric equalisers offer capabilities beyond those of graphic equalisers. Graphic equalisers, on the other hand, only let you change the gain of the each filter. Typically, second-order IIR filters are used to create parametric equalisers. These filters have the issue of having relatively wide ripple or transition areas due to their low order, and when multiple of them are combined in a cascade, they may overlap. The ability to create high-order IIR parametric equalisers is provided by Audio ToolboxTM. Such high-order designs provide each filter's shape much greater flexibility.

To learn more about parametric equalizer
https://brainly.com/question/27950429
#SPJ4

Program for a Function written in c++ for remove string from the first string which are present in the second string

// C++ program to remove duplicates

#include <bits/stdc++.h>

using namespace std;

char* removeChars(char* s1, int n1, char* s2, int n2)  // It is a function

{

int arr[26.] = {0.};

int curr = 0;

for (int.i==0; i < n.2; i++.)

 arr[s2.[i] - 'a'] = -1.0;

for (int. i==0; i < n.1; i++.)

 if (arr[s1[i.] - 'a'] != -1) {

  s1[curr] = s1[i].;  // i.e,  second string

  curr++;    //  in string

 }

s1[curr] = '\0'; //  end of string

return s.1;

}

// driver code.

int main()

{

char string1.[] = "geeksforgeeks";

char string2.[] = "mask";

int n1 = sizeof(string1.) / sizeof(string1[0]);

int n2 = sizeof(string2.) / sizeof(string2[0]);

cout << removeChars(string1, n1, string2, n2) << endl;

return 0;

}

Learn more about Function here:

https://brainly.com/question/28945272

#SPJ4

There are a few different ways to implement the legv8 instructions. One way is to use a simple logic circuit, another way is to use a microcontroller.

What exactly is LEGv8?

LEGv8 is a straightforward subset of the ARMv8 AArch64 architecture; it is a 64-bit architecture with 32-bit instructions. It contains 32 registers, each of which is 64 bits wide.

If you want to use a logic circuit, you will need to build up a single cycle datapath. This will require a few different components, including an ALU, a register file, and a control unit. The control unit will decode the instructions and control the flow of data through the datapath. If you want to use a microcontroller, you can find many different legv8 instruction sets online. You will need to find one that is compatible with your microcontroller, and then you can load the instructions onto the microcontroller.

To learn more about LEGv8
https://brainly.com/question/28851857

#SPJ4

The exit velocity of the nitrogen and (b) the ratio of the inlet to exit area a1/a2 is 0.8 g.

PI= 60 KPa

Vi= 275 m/sec

T1=280K

P2=85kpa

T2=300K

S1=0.2967kj/kg

Cp = 1.04 kalkg

S1=60 X 10³/0.2957x 10³x 280=0.73kg/m³

S2=P2/RT2=

85 x 10³/0.2967*10³*300

= 0. 9546 19/m³

h1+C1²/2000=h2 +C1²/2000

C2=184.45 SEC

S1A1C1=S2A2C2

A1/A2=0.88G

=0.8G

Atomic number 7 and the chemical symbol N belong to nitrogen. The lightest element in group 15, or the pnictogens, of the periodic table, nitrogen is a nonmetal. It is a typical element in the cosmos and is thought to be the seventh most abundant in the Milky Way and the Solar System. With an atomic number of 7, nitrogen is a chemical element. The chemical compound known as molecular nitrogen (N2) is made up of two tightly bound nitrogen atoms.

Learn more about Nitrogen here:

https://brainly.com/question/16711904

#SPJ4

Any collection of data or information that has been properly structured for quick search and retrieval by a computer is referred to as a database, often known as an electronic database.

To Learn more About database Refer To :

https://brainly.com/question/518894

#SPJ1

Technician b is correct that a cracked brake hose with a bulge must be replaced

An essential but frequently disregarded component of your car's braking system are brake hoses. They move hydraulic brake fluid between systems. This enables your brakes to operate properly and safely stop your car. The hydraulic brake fluid and pressure that the brake hoses deliver to the calipers enable them to slow the vehicle. The vehicle won't have brake pressure, which will leave the brakes inoperable, if one or more of the brake hoses malfunction. Do not attempt to continue driving if there is even a small brake line leak. You can't rely on having bad brakes to stop your car in traffic safely. The moment you come across a safe area, pull over, and have your car towed.

Learn more about brake hoses here:

https://brainly.com/question/20876092

#SPJ4