Who did the ram caught in the thicket (Genesis 22:13) represent?

the second options

the number of protons and electrons found in that element

This question is describing two chemical equations whereby the concentration of ammonia has to be determined. The first reaction is between 25.00 mL of ammonia and 50.00 mL of 0.100-M HCl whose excess was neutralized with 21.50 mL of 0.050-M Na₂CO₃ and thus, the concentration ammonia in the cloudy solution was determined as 0.114 M.

First of all we need to go over the titration of the excess HCl with Na₂CO₃ by writing the chemical equation it takes place when they react:

[tex]2HCl+Na_2CO_3\rightarrow 2NaCl+CO_2+H_2O[/tex]

Whereas the mole ratio of HCl to Na₂CO₃ is 2:1 and the volume of the HCl leftover is determined as follows:

[tex]V_{HCl}^{leftover}=\frac{2*0.050M*21.50mL}{0.100M} =21.5mL[/tex]

Next, we infer that the consumed volume of HCl by the ammonia solution was:

[tex]V_{HCl}^{consumed}=50.00mL-21.50mL=28.5 mL[/tex]

Then, we write the chemical equation that takes place between ammonia and HCl:

[tex]HCl+NH_3\rightarrow NH_4Cl[/tex]

Whereas the mole ratio is now 1:1, which means that the concentration of ammonia was:

[tex]M_{NH_3}=\frac{28.5mL*0.100M}{25.00mL}\\\\ M_{NH_3}=0.114M[/tex]

Learn more:

Answer:

The answer is C

Explanation:

Just took the test

Hydrogen bonding is the intermolecular interaction that occurs due to electronegativity differences. Substance B has stronger bonds and requires more energy. Thus, option B is correct.

Hydrogen bonding is present in the water molecules that is because of the electronegativity differences and the dipole-dipole interaction. The hydrogen of the water molecule is bonded to the oxygen molecule.

The hydrogen bonding affects the boiling and the melting point of the substances as more energy are required to change the phase of the matter. So when substance B requires 100ºC than substance A (78.4ºC) it shows strong hydrogen bonding.

Therefore, option B. substance B has a strong hydrogen bond is correct.

Learn more about hydrogen bonds here:

https://brainly.com/question/25989787

#SPJ2

Answer:

There are 27 Valence electrons : )

4+1+1+1+6+4+1+1+4+1+1+1 is 27

Explanation:

There are a total of [5×1]+[2×4]+[7]=21[5×1]+[2 × 4 ] + [ 7]=21 valence electrons

Explanation:

brain and heart froce acts between two chloramine

Answer:

Dispersion, Hydrogen-bonding, and Dipole forces act between two chloramine (NH2CI) molecules.

Explanation:

Dispersion is exerted between all molecules. Chloramine is polar, therefore dipole forces are present. The molecular geometry of chloramine (NH2Cl) is a trigonal pyramidal, therefore hydrogen-bonding forces are present.

Answer:

b

Explanation:

OH and CN both have -1 charges

Answer:

The egg will gain mass.

Explanation:

Eggs soaked in distilled water will gain mass and appear dramatically swollen.

Answer:

Gain mass

Explanation:

Carbonated water will create a reaction inside the egg making the fluid inside the egg becoming more solid thus gaining mass

Hope this helps!

Answer:

False

Explanation:

As I like to think of it, equilibrium will shift either 'forwards' (to increase products) or 'backwards' (to increase reactants) to oppose any change in system;

If heat is added, the equilibrium will shift in the direction that reduces heat within the system;

In other words, it will shift in favour of the endothermic reaction, i.e. the reaction where heat is gained by the molecules/atoms and therefore taken out from the system;

If the 'forwards' reaction, producing NH₃, is exothermic (i.e. energy is released in the reaction), then the 'backwards' reaction is endothermic;

So the equilibrium will shift in this direction, which is the reaction of 2 NH₃ molecules producing N₂ and 3 H₂

Answer:

About 7.0 × 10³ J or 7.0 kJ

Explanation:

We want to determine the amount of energy needed to raise the temperature of 67 grams of water from 20°C to 45°C.

We can use the heat equation:

[tex]\displaystyle q = mC\Delta T[/tex]

Where C is the specific heat of water.

Substitute and evaluate:

[tex]\displaystyle \begin{aligned} q & = (67\text{ g})\left(\frac{4.2\text{ J}}{\text{g-$^\circ$C}}\right)\left(45^\circ \text{ C}- 20.^\circ\text{ C}\right) \\ \\ & = (67\text{ g})\left(\frac{4.2\text{ J}}{\text{g-$^\circ$C}}\right)(25^\circ \text{ C}) \\ \\ & = 7.0\times 10^3 \text{ J}\end{aligned}[/tex]

Recall that there are 1000 J in a kJ. Hence:

[tex]\displaystyle \begin{aligned} q & = 7.0\times 10^3 \text{ J} \cdot \frac{1\text{ kJ}}{1000\text{ J}} \\ \\ & = 7.0 \text{ kJ}\end{aligned}[/tex]

In conclusion, it will take about 7.0 × 10³ J or 7.0 kJ of energy to raise the temperature of 67 grams of water from 20 °C to 45 °C.

Taking into account the reaction stoichiometry and limiting reagent, 0.7977 grams of KClO₃ are formed from the  reaction of 2.50 g of KClO₄  with 150 mg of FeCl₂  in excess of H₂SO₄.

In first place, the balanced reaction is:

2 FeCl₂ + 13 KClO₄ + H₂SO₄ → 2 Fe(ClO₃)₃ + K₂SO₄ + 11 KClO₃ + H₂O

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

The molar mass of the compounds is:

Then, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:  

The limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.

To determine the limiting reagent, it is possible to use the reaction stoichiometry of the reaction and a simple rule of three as follows: if by stoichiometry 1801.15 grams of KClO₄ reacts with 253.5 grams of FeCl₂, if 2.50 grams of KClO₄ react how many mass of FeCl₂ will be needed?

[tex]mass of FeCl_{2}=\frac{2.50 grams of KClO_{4} x253.5 grams of FeCl_{2}}{1801.15 grams grams of KClO_{4}}[/tex]

mass of FeCl₂=0.35 grams

But 0.35 grams of FeCl₂ are not available, 150 mg= 0.150 grams (being 1000 mg= 1 grams) are available. Since you have less mass than you need to react with 1801.15 grams of KClO₄, FeCl₂ will be the limiting reagent.

Then the following rule of three can be applied: if by reaction stoichiometry 253.5 grams of  FeCl₂ form 1348.05 grams of KClO₃, 0.150 grams of FeCl₂ form how much mass of KClO₃?

[tex]mass of KClO_{3}=\frac{0.150 grams of FeCl_{2}x1348.05 grams of KClO_{3} }{253.5grams of FeCl_{2} }[/tex]

mass of KClO₃= 0.7977 grams

Then, 0.7977 grams of KClO₃ are formed from the  reaction of 2.50 g of KClO₄  with 150 mg of FeCl₂  in excess of H₂SO₄.  

Learn more about reaction stoichiometry:

Given that –

We know that –

Then –

[tex]\qquad[/tex][tex]\bf\longrightarrow pOH = 14 -12.5 [/tex]

[tex]\qquad[/tex][tex]\sf \longrightarrow pOH = 1.5[/tex]

[tex]\qquad[/tex][tex]\sf \longrightarrow [OH^- ] = 10^{-1.5 }[/tex]

[tex]\qquad[/tex][tex]\bf \longrightarrow [OH^-] = 3.16 × 10^{-2}[/tex]

Now the number of moles of KOH need to ensure that concentration of Hydroxide anions is equal to –

[tex]\qquad[/tex][tex]\bf \longrightarrow 3.74\: L \times \dfrac{3.16× 10^{-2}}{1 \: L }[/tex]

[tex]\qquad[/tex][tex]\bf \longrightarrow 1. 18 × 10^{-1 }M [/tex]

Volume of the solution contains the need number of moles of Hydroxide anions –

[tex]\qquad[/tex][tex]\sf \longrightarrow \dfrac{ 1.18×10^{-1} \: moles \: OH^-}{0.826 \: moles \: OH^-}[/tex]

[tex]\qquad[/tex][tex]\sf \longrightarrow 0.143 L [/tex]

[tex]\qquad[/tex][tex]\sf \longrightarrow 0.143 \times 1000[/tex]

[tex]\qquad[/tex][tex]\pink{\bf\longrightarrow 143 mL }[/tex]

______________________________________

Answer:

So, Percentage Composition of Aluminium = 2778×100%=34.62% (approx.) Percentage Composition of Oxygen = 3×1678×100%=61.54% (approx.)

Answer:

A.

The answer is A :)

Answer:

I think that is the literal answer

Equilibrium concentration of HOCl at 25°C is 0.140 M

The equation of the reaction at equilibrium is given below:

H₂O (g) + Cl₂O (g) ⇄ 2 HOCl (g)

Equilibrium constant, Kc = 0.0900 at 25°C

An ICE chart for the reaction is set up below

     H₂O (g)  +  Cl₂O (g)   ⇄  2 HOCl (g)

I     0.384        0.384             0.652

C     -x                -x                   + 2x

E    0.384 - x   0.384 - x       0.652 + 2x

The equation of the equilibrium constant is given as;

Kc = [tex]\frac{[HOCl]^2}{[H_{2}O][Cl_{2}O]}[/tex]

substituting the values into the equation:

Kc = [tex]\frac{(0.652 + 2x)^2}{( 0.384 - x)( 0.384 - x)}[/tex] = 0.0900

4x² + 2.608x + 0.425 = 0.0900 (0.147 - 0.768x + x²)

4x² - 0.09x² + 2.677x - 0.069x + 0.425 - 0.013 = 0

3.910x² + 2.677x + 0.412 = 0

Solving using the quadratic formula:

a = 3.910, b = 2.677, c = 0.412

x = [tex]\frac{-2.677\±\sqrt{2.677^2 - 4*3.910*0.412}}{2*3.910}[/tex]

x = -0.256 or -0.431

The negative sign indicates that equilibrium is to the left of the reaction

Since x cannot be greater than 0.384, x = -0.256.

Equilibrium concentration of HOCl = 0.652 + 2(-0.256)

Equilibrium concentration of HOCl at 25°C is 0.140 M

Learn more at: https://brainly.com/question/15050697

Answer:

the bond is ionic

Explanation:

Answer:

Vitamins are classified as either fat soluble (vitamins A, D, E and K) or water soluble (vitamins B and C). This difference between the two groups is very important. It determines how each vitamin acts within the body.

Answer:

The answer would be oxygen.

Science can be defined as the study of nature, its behaviors and the

interactions between the various components.

Science is divided into three main branches which are

Science can also be referred to as the gaining of knowledge through various

methods and verifiable by experiments to ensure it is valid.

Read more about Science here https://brainly.com/question/898824

Answer: Trees, like all plants, are alive and require nutrients to survive. ... This dormancy is what allows trees to survive the cold winter. During dormancy, a tree's metabolism, energy consumption, and growth all slow down significantly in order to endure the harsh season of winter when water and sunlight are more scarce

Explanation: mark me brainlest plz if this helped only !

Answer:

False

Explanation:

Fluid pressure has no direction, being a scalar quantity, whereas the forces due to pressure have well-defined directions: They are always exerted perpendicular to any surface. The reason is that fluids cannot withstand or exert shearing forces.

Answer:

Without the hydrosphere, the atmosphere will no longer be able to carry up the evaporated water, as well as pour down the water, leaving the biosphere to rot away. The hydrosphere works with the Biosphere to provide the requirement of water to the organisms needs, as well as the hydrosphere assisting in photosnythesis.

Explanation:

Answer:

The hydrosphere refers to the water on the earth crust. If there were no hydrosphere, we would not have lakes, oceans, rivers, or even a hose full of water. There would also be no life. Nothing can live without water, so nothing would have evolved.  

Explanation:

The mass of ammonium chloride that must be added is : ( A ) 4.7 g

Given data :

Volume of water ( V )  = 250 mL = 0.25 L

pH of solution = 4.85

Kb = 1.8 * 10⁻⁵

Kw = 10⁻¹⁴

Given that the dissolution of NH₄Cl gives NH₄⁺⁺ and Cl⁻ ions the equation is written as :

NH₄CI  +  H₂O  ⇄  NH₃ + H₃O⁺

where conc of H₃O⁺

[ H₃O⁺ ] = [tex]\sqrt{Ka.C}[/tex]   and Ka = Kw / Kb

∴ Ka = 5.56 * 10⁻¹⁰

Next step : Determine the concentration of H₃O⁺  in the solution

pH = - log [ H₃O⁺ ] = 4.85

∴ [ H₃O⁺ ] in the solution = 1.14125 * 10⁻⁵

Next step : Determine the concentration of NH₄CI in the solution

C = [ H₃O⁺ ]² / Ka

  = ( 1.14125 * 10⁻⁵ )² /  5.56 * 10⁻¹⁰

  = 0.359 mol / L

Determine the number of moles of NH₄CI in the solution

n = C . V

  = 0.359 mol / L  * 0.25 L =  0.08979 mole

Final step : determine the mass of ammonium chloride that must be added to 250 mL

mass = n * molar mass

         = 0.08979 * 53.5 g/mol

         = 4.80 g  ≈ 4.7 grams

Therefore we can conclude that the mass of ammonium chloride that must be added is 4.7 g

Learn more about ammonium chloride : https://brainly.com/question/13050932

Answer:

When we do multiple trials of the same experiment, we can make sure that our results are consistent and not altered by random events and are reliable. Multiple trials can be done at one time. E.g. If we were testing a new fertilizer, we could test it on lots of individual plants at the same time.

Hope that helped.x

The London forces designated as A are much weaker than the dipole- dipole interaction designated as B.

The intermolecular forces are interactions that exists between molecules of a substance in a particular state of matter. The nature of intermolecular forces in a substance greatly affect the properties of the substance.

We can see that A represents weak London forces while B represents dipole - dipole interactions. The London forces are very much weaker than the dipole - dipole interactions.

Learn more intermolecular forces: https://brainly.com/question/17111432

The acid ionization constant is the quantitative measure of the acidic strength. For oxalic acid, Ka = [H⁺] [HC₂O₄⁻] / [H₂C₂O₄]

Acid dissociation (Ka) is the ratio of the concentration of the conjugate base and hydrogen ion to the concentration of the chemical.

Oxalic acid is a weak acid and gets dissociated as:

H₂C₂O₄ ⇌ H⁺ + HC₂O₄⁻

or

HC₂O₄⁻ ⇌ H⁺ + C₂O₄²⁻

The acid ionization constant for the reactant and the product is given as:

Ka = [H⁺] [A⁻] / [HA]

Ka = [H⁺] [HC₂O₄⁻] / [H₂C₂O₄]

Therefore, the ionization constant for oxalic acid is given as Ka = [H⁺] [HC₂O₄⁻] / [H₂C₂O₄]

Learn more about acid ionization constant here:

https://brainly.com/question/24132247

#SPJ1

boron, carbon, nitrogen, oxygen and flourine families in addition to the noble gases.

_________________________________________________________

also to answer the 'hello guys what is good!':nothin u?

__________________________________________

o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0o0

The volume of water needed to make the solution is 473.76 mL

We'll begin by calculating the volume of the diluted solution.

M₁V₁ = M₂V₂

15.5 × 5.41 = 0.175 × V₂

83.855 = 0.175 × V₂

Divide both side by 0.175

V₂ = 83.855 / 0.175

V₂ = 479.17 mL

Finally, we shall determine the volume of water needed.

Volume of water = V₂ – V₁

Volume of water = 479.17 – 5.41

Volume of water = 473.76 mL

Therefore, the volume of the water needed is 473.76 mL

Learn more about dilution: https://brainly.com/question/16167657

There are 6.44 × 10²³ molecules in 24.0 L of oxygen gas at standard temperature and pressure.

HOW TO CALCULATE NUMBER OF MOLECULES:

To calculate the number of molecules in a substance, we need the number of moles. The number of moles can be calculated using ideal gas law equation as follows:

PV = nRT

Where;

According to this question, oxygen gas is at standard temperature (273K) and pressure (1 atm)

1 × 24 = n × 0.0821 × 273

24 = 22.4n

n = 24 ÷ 22.4

n = 1.07moles

To calculate the number of molecules, we multiply the no. of moles by Avogadro's number (6.02 × 10²³)

no. of molecules = 1.07 × 6.02 × 10²³

no. of molecules = 6.44 × 10²³

Therefore, there are 6.44 × 10²³ molecules in 24.0 L of oxygen gas at standard temperature and pressure.

Learn more about how to calculate number of molecules at: https://brainly.com/question/19481036?referrer=searchResults