why do we use acid during the detection of halogens​

Answers

Answer 1

Answer:

Nitric acid decomposes sodium cyanide and sodium halide. else, they precipitate in test and misguide the result. Therefore, dilute nitric acid is added before testing halogens to expel all the gases if evolved.


Related Questions

A tiny crystal of a solid substance is added to an aqueous solution of the same substance. What would happen if the original solution was: 1) Super saturated 2) Unsaturated 3) Saturated.

Answers

Answer:

3.)Saturated

Explanation:

it was saturated and then turned super saturated

which ionization process requires the most energy?

Answers

Answer:

the second ionization energy

Explanation:

The second ionization energy is always larger than the first ionization energy, because it requires even more energy to remove an electron from a cation than it is from a neutral atom.

C. A - ion (negative ion, one with extra negative charge)?

Answers

Answer:

Negative ion with one extra electron.

BRAINLIST Pls

Anions are the name for ions that have a negative charge. The body contains several common chemicals as ions. Sodium, potassium, calcium, chloride, and bicarbonate are typical examples.

What are anions ?

Negatively charged electrons are called anion. When non-metals gain electrons, they are produced. They absorb one or more electrons. They have a negative charge overall as a result. The ion concentration iodide ( I- ), chloride ( Cl- ), and hydroxide are among examples ( OH– ).

The electrode where reduction takes place in any electrochemical cell  is characterized as the cathode. On the other extreme, the positive electrode will draw anions, or negative ions, to itself.

Thus, when an atom obtains electrons, it transforms into the negatively-charged ion known as an anion.

To learn more about anions follow the link below;

https://brainly.com/question/15578817

#SPJ2

In an ionic compound, the total positive charge of all the positive ions ____ the total negative charge of all the negative ions.

Answers

Answer:

I think it would be 0 since cations and anions must always combine in such a way so that their charges cancel.

calculate the number of moles of ethanol acid in 30 cm³of 1 mol dm-³ solution ​

Answers

Answer:

May I assume "ethanol acid is just ethanol (it has one slightly acidic H atom).  If so, the molar mass is 46.02 g/mole.

Explanation:

We have 30 cm^3 [30 ml] of 1.0 M (1 mole/liter)  [1 dm³ = 1 liter].

That is 1 mole/liter.  30 ml would contain (0.030 liter)*(1 mole/1 liter) = 0.03 moles.

If an object absorbs all the light that hits it, the object appears to be

Answers

reflective

make me brainliest pls

The minimum collision energy between two molecules in order for them to react is called A activation energy. B dispersal energy C spontaneous energy D transition energy.​

Answers

A: activation energy

hope i helped :D

A student group is involved in a restoration study of a nearby disturbed area. They decide to collect six soil samples and analyze them for carbon (C) and nitrogen (N). Two of the samples are found to be very high in C and N, but the other four samples are low in both. The students also notice that the color of the two soil samples that are high in C and N is very dark.

Requried:
What is the most likely explanation of the data?

Answers

The very dark soils samples that contain the highest amounts of carbon and nitrogen is loamy soil.

Soil is the outermost portion of the earth's crust on which plants grow. The appearance of a soil sample gives an idea of the type and nature of the soil it is.

We are told that two out of the six soil samples gathered are very dark and contains an enormous amount of carbon and nitrogen. These two must be samples of loamy soil.

Learn more: https://brainly.com/question/17638582

Which list includes only bulk properties of matter?
boiling point, strength of electrical forces, vapor pressure
kinetic energy, strength of electrical forces, vapor pressure
boiling point, surface tension, vapor pressure
boiling point, kinetic energy, surface tension

Answers

The list which includes only bulk properties of matter is: C. boiling point, surface tension, vapor pressure.

What is matter?

Matter can be defined as anything that has mass and can occupy space.

Thus, any physical object or substance that is found on planet Earth is typically composed of matter.

The three (3) states of matter:

Since all matter are made up of atoms, they have a property of existing in three (3) distinct states and these include;

SolidGasLiquid

A bulk property of matter refers to the property that affects matter as a whole and they are listed as follows:

1. Stress

2. Strain

3. Elasticity

4. Boiling point

5. Surface tension

6. Vapor pressure

In conclusion, the other list of properties are not a bulk property of matter.

Find more information on matter here: https://brainly.com/question/17203857

Help please!!!!!!!!!!!!!!!!!!!!…

Answers

Answer:

i honestly dont know how this is showing up on my thing i am 13

Explanation:

sorry i dont know at all

Assume trilobites went extinct 248 million years ago.
If a trilobite is found in a rock layer, what do you
know about the age of that rock layer?

Answers

Answer:

the rock layer is at least 248 million years old

Explore

2KClO3 —> 2KCl + 302 this equation represents both a ___ reaction AND a(n) ___ reaction.

A. combustion; decomposition
B. single replacement; combustion
C. combustion; oxidation-reduction
D. decomposition; oxidation-reduction

Answers

Answer:

option D--Decomposition; oxidation-reduction

Answer: A. Combustion; decomposition

Explanation: I took it on a quiz and got it right!

The same quantity of each solute is added to water. Which solution will have the greatest number of H30+ ions at equilibrium?
(1 point)
O weak acid
O strong acid
O strong base
O weak base

Answers

Answer is strong acid

If you begin with a saturated solution of sugar dissolved in water, and then you heat the solution, what type of solution will result

Answers

After beginning the experiment with a saturated solution, then increasing the heat, we will be left with an unsaturated solution.

To obtain the saturated solution, we must dissolve sugar in the water. We can say that the solution has become saturated when the solution is no longer able to dissolve more sugar. It has reached its capacity for the solute that it can dissolve in these conditions.

However, the temperature of a solution has an effect on the dissolving limit of the solution. That is, when a solution is heated it becomes able to dissolve more solute. Therefore, if we were to heat a saturated solution, it will be able to dissolve more solute and therefore will no longer be at its limit, meaning it is no longer a saturated solution. It has become unsaturated.

To learn more visit:

https://brainly.com/question/3035198?referrer=searchResults

In Experiment 1, what volume did the propane gas occupy in the Erlenmeyer flask before the addition of any water?

Answers

This question is mentioning an experiment that is not being described about the volume of the propane gas in an Erlenmeyer before the addition of water.

In this case, since no information is given, it is possible to propose a suggested procedure of how to figure it out via gas laws, specifically, the ideal gas one, since no change is decribed before the addition of water:

[tex]PV=nRT[/tex]

Thus, you can solve for the volume, by dividing both sides by the pressure, so that you will get:

[tex]V=\frac{nRT}{P}[/tex]

Now, to ensure a correct calculation, make sure you have the moles (divide by the molar mass of propane, 44,1 g/mol, if you were given the grams), the temperature in K (add 273.15 if you have degree Celsius), the ideas gas constant as 0.08206 and the pressure in atm, in order to have consistent units.

If you need the volume in milliliters, you will need to multiply the previous answer by 1000 in order to perform the appropriate conversion.

Learn more:

https://brainly.com/question/15268548https://brainly.com/question/16521007

Complete the sentence. When a base is added to water, hydrogen ions __________.

Answers

Answer:

Explanation:

Decreases

Answer:

Hydrogen ions decrease. It reduces the concentration of ions.

Explanation:

What is the percentage of Aluminum in Aluminum Sulfate?

Answers

Answer:

342. 15 g/mol is the mass

Al Aluminium 26.98g 2 atoms per mole = 15.7716%

S Sulfur 32.06g 3 atoms per mole = 28.1151%

O Oxygen 15.99g 12 atoms per mole = 56.1133%

Explanation:

Hope this helps

Answer:

15,7%

Explanation:

What is the percentage of Aluminum in Aluminum Sulfate?

Aluminum Sulfate

is Al2 (SO4)3

its molar mass is

(2 X 27) + (3 X 96) = 54 + 288 = 344

THE % Al IS (54 /344) X 100 = 15,7%

Describe how to do an experiment to show that when you dissolve salt in water the salt is still there.

Answers

Answer:

When salt is dissolved in water, the particles of salt get into the spaces between particles of water and starts dissolving and disappear.

Explanation:

5.The amount of pollution produced by cars was measured for cars using gasoline containing different amounts of lead. what is the independent, dependent and controlled variables?

Answers

Independent: Gasoline with different amounts of lead Dependent: Amount of pollution produced

Beryllium (Be) has four electrons. Fluorine (F) has nine electrons. Which chemical formula shows the correct subscripts for the product of the reaction when beryllium and fluorine combine

Answers

Answer:

BeF2

Explanation:

The correct chemical formula for the product of the reaction when beryllium and fluorine combine is BF₂.

The valence electron of an atom determines how an atom goes into bonding.

Beryllium(Be) has 4 electron and has 2 valence electron. To fulfil the octet rule, it can easily give out this 2 electron during bonding.

Fluorine(F) has 9 electrons and 7 valency electrons. To fulfil the octet rule, it readily accepts a single electron.

The correct chemical formula for the product of the reaction when beryllium and fluorine combine is BF₂.

This means 1 atom of beryllium combines with 2 atoms of fluorine to form beryllium fluoride. The beryllium give its 2 valency electrons to the 2 atoms of fluorine. The 2 atoms of fluorine will now have a valency electron of 8 each. The octet rule has been fulfilled at this point.

read more: https://brainly.com/question/24702809?referrer=searchResults

How many electrons are there in the N shell of an element?

Answers

[tex] \huge \mathbb \pink{ANSWER:}[/tex]

2,5 the elctrons arw there in the N shell of an element.

Explanation:

Hope it helps ^•^

Each shell can contain only a fixed number of electrons: The first shell can hold up to two electrons, the second shell can hold up to eight (2 + 6) electrons, the third shell can hold up to 18 (2 + 6 + 10) and so on. The general formula is that the nth shell can in principle hold up to 2(n2) electrons

This element has an atomic number lower than aluminum and is in group 14

Answers

Answer:

that is impossible. the atomic number can only go up each group

Are bath bombs pure substances or mixtures

Answers

Answer:

Yes.

Explanation:

Bath bombs are usually made from three key ingredients: baking soda, citric acid and cornstarch, said Frankie Wood-Black, an instructor in chemistry at Northern Oklahoma College and an experienced bath-bomb maker. Often, bath bombs also include dyes and perfumes, and sometimes they have epsom salt.

Answer: yes

Explanation:

Question 5 (5 points)
Use the picture below to determine if the following statements are observations or if the statements are inferences. Place a “O” in the blank for an observation and “I” for an inference.


BLANK 1: A person is in the water
BLANK 2: The weather is cold
BLANK 3: The tree branch is broken
BLANK 4: If the boy crawled out of the water the goat would push him back in
BLANK 5: The boy fell off the branch

Answers

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

Blank # 1 - Observation

Blank # 2 - Observation

Blank # 3 - Observation

Blank # 4 - Inference

Blank # 5 - Observation

Answer:

Numbers 1,2,3, and 5 are all O
And Number 4 is aN I

During ionization, metals lose electron, this change is called?​

Answers

Ans

This is called oxidation

Explanation:

the oxidation number of a metal ion is more than the oxidation number of metal atom

What element is being reduced in the following redox reaction? Cr(OH)4-(aq) ClO-(aq) → CrO42-(aq) Cl-(aq).

Answers

The element that is being reduced in the given redox reaction is Cl (Chlorine)

The given redox reaction is

Cr(OH)₄⁻(aq) + ClO⁻(aq) → CrO₄²⁻(aq) + Cl⁻(aq)

First, we will define the terms oxidation and reduction

Oxidation can be defined as an increase in oxidation number

Reduction is defined as a decrease in oxidation number

This means the element that is being reduced in the reaction would have a decrease in oxidation number.

Oxidation number of Cr in Cr(OH)₄⁻ is +3; and the oxidation number of Cr in CrO₄²⁻ is +6. This is an increase in oxidation number and it means Cr is being oxidized.

Oxidation number of Cl in ClO⁻ is +1; and the oxidation number of Cl in Cl⁻ is -1. This is a decrease in oxidation number and it means Cl is being reduced.

Hence, the element that is being reduced in the given redox reaction is Cl (Chlorine).

Learn more here: https://brainly.com/question/25673444

CORRECT ANSWER WILL BE MARKED BRAINIEST

predict the chemical formula that results when the following pairs of ions combine to form an ionic bond.

1. K+1 and S-2

2. Pb+4 and N-3

Answers

1. K2S (Potassium Sulfide)
2. Pb3N4 (lead IV nitride)

which would best be categorized as heat transfer by conduction?
a.) wearing a white shirt to stay cool on a summer day
b.) warming your body under the sun in summer
c.) feeling the heat from a lightbulb with your hand when touching the bulb
d.) feeling the heat from a light bulb while holding your hand from 6 inches away

Answers

Answer:

c.) feeling the heat from a lightbulb with your hand when touching the bulb

Explanation:

In heat transfer by conduction, feeling the heat from a lightbulb with your hand when touching the bulb will be categorised as the best condition.

c.) feeling the heat from a lightbulb with your hand when touching the bulb

It is C because it is the direct transfer of heat from the lightbulb to your hand

a stone is projected horizontally with 20 metre per second from the top of a tall building calculate its position in velocity after 3 seconds neglecting the air resistance .​

Answers

Answer:

105m

Explanation:

u=20m/s

g=10m/s^2

t=3s

s=ut+1/2gt^2at

s=20*3+1/2*10*3*3

s=105m

an inexperienced student adds a solution of catalytic h2so4 and water to the alkene shown below, expecting to produce 1-cyclobutylethan-1-ol.

Answers

The rearrangement produces a more stable tertiary carbocation and the unexpected product.

In the image shown, the substrate is 1-cyclobutylethene. The attack of H2SO4 and water will lead to the conversion of the alkene to an alkanol. Two possible products may be obtained with one being greater than the other.

The unexpected product (Shown in the image attached) is obtained due to rearrangement of the carbocation intermediate. The rearrangement produces a more stable tertiary carbocation and the unexpected product.

Learn more: https://brainly.com/question/6284546

Other Questions
If each of these food chains start with 10,000 grams of phytoplankton, how much reaches the highest trophic level in each food chain How is the judicial power structured? Round 0.008547 to the nearest thousandth :] What is 59.56 rounded to the nearest whole number? Write the sentence from the concluding paragraph of "The School Uniform Question" thatrestates the thesis Why doesnt Greg want to go inside in his building at the beginning of the story? The Treasure of Lemon Brown"" by Walter Dean Myers. How did abolitionists fight slavery? Choose three answers.by passing laws by making speechesby publishing newspapers by supporting the Underground Railroad by enacting slave codes I need answers 1 through 5 please what happens to an ecosystem if its river is destroyed PLEASE ANSWER NOWWWWW340816.326531 If a battery causes a wire to carry a current of 4 Amps how many coulombs of charge flow past any point in the wire in 3 seconds why do we need a constitution ? mention the difference among act law and rule regulation pick a number, any number.If it's even, divides it by 2. If it's odd, multiply it by 3 and add 1. Now repeat those steps again with your new number. Eventually, if you keep going, you'll eventually end up at 1 every single time (please help me) How many pounds is a pepper?I really need to know. I. PRONOUNCIATIONCircle the letter A, B, C, or D to indicate the word whose underlined partdiffers from the other three in pronunciation in each of the followingquestions.1. A.cities B. satellites C. series D. workers2. A. develops B. takes C. laughs D. volumes3. A. phones B. streets C. books D. makes4. A. proofs B. regions C. lifts D. rocks5. A. involves B. believes C. suggests D. steals find the area of the triangle. 20ft, by 21ft. by 29ft. rarefaction is an area of low pressure.TrueFalse Use the Distributive Property to solve the equation.3(x6)+8=5x2 The type value ____ for the input element may cause modern browsers to validate entries to ensure that they are valid web addresses.