xvii. Heat travels from one end of an iron rod to the other end by
A Convection
B Radiation
C Conduction
D Vibration
xix. Which one of the following statements about heat transfer is incorrect?
A Convection can take place in a vacuum.
B Convection can take place in a liquid.
C A convection current can be present in gas.
D Sun heats up the earth by convection.
xx. When matters changes state, its temperature:
A Increases
B Decreases
C Changes to the temperature of surrounding.
D Remains same.

The constant acceleration of the green car which passes red color car is  2.81 m/s^2.

In this problem, the initial positions of the red and green cars are xr = 0 and xg = 220 m, respectively, and their initial velocities are vr = 20 km/h and vg = 0. When the red car has a velocity of 20 km/h, the cars pass each other at x = 44.5 m, and when the red car has a velocity of 40 km/h, they pass each other at x = 76.6 m.

We can use these two equations to solve for the acceleration of the green car. First, we convert the velocities from kilometers per hour to meters per second by dividing by 3.6. This gives us vr = 5.56 m/s and vg = 0 m/s.

Then, we can substitute these values into the equation for position and solve for the acceleration. When the red car has a velocity of 20 km/h, the equation becomes:

x = 0 + 5.56t + 1/2at^2

x = 44.5

Solving for a, we find that the acceleration of the green car is a = 2.61 m/s^2.

When the red car has a velocity of 40 km/h, the equation becomes:

x = 220 + 11.11t + 1/2at^2

x = 76.6

Solving for a, we find that the acceleration of the green car is a = 2.61 m/s^2.

When the red car has a velocity of 40 km/h, the equation becomes:

x = 220 + 11.11t + 1/2at^2

x = 76.6

Solving for a, we find that the acceleration of the green car is a = 3.02 m/s^2.

Since the acceleration is the same in both cases, we can take the average of these two values to find the constant acceleration of the green car. The average of 2.61 m/s^2 and 3.02 m/s^2 is 2.81 m/s^2.

To know more about speed

https://brainly.com/question/28224010

#SPJ4

The following traits are frequently present in vulnerabilities with high scores. It was challenging to take advantage of the weakness. If exploited, privileges might be increased. Exploitation might cause a large loss of data or period of unavailability.

The criticality and vulnerability assessment tool from ABB is a structured, quick assessment method used to rank plant areas, systems, or pieces of equipment. There is never a lack of issues to tackle, but there are always restrictions on the amount of time, money, or staff available.

Therefore, A Critical Vulnerability is one that can be actively exploited or for which a publicly accessible attack or proof-of-concept code exists.Both techniques for displaying the rankings and severity of security flaws are supported by Code Insight.

Learn more about framework here:

https://brainly.com/question/28197617

#SPJ4

According to the information given, the continent weighs 2.422 * 10²¹ kg.

Volume is the amount of space a thing occupies, whereas mass is the amount of stuff it contains.

What is the rock's mass?

The following formula is used to calculate the rock's mass:

Volume times Density = Mass

The rock has a density of 2830 kg/m³

Area of side * Depth of rock equals the volume of the rock.

The rock's volume is equal to 5.5 * 10⁶ m x 5.5 * 10⁶ m x 2.83 * 10⁴ m

The rock's volume is  8.56 * 10¹⁷ m³

Rock mass: 8.56 * 10¹⁷ m³ * 2830 kg/m³

The rock weighs 2.422 * 10²¹ kg

To know more about Density , visit:

https://brainly.com/question/3310996

#SPJ1

All of the magnetic domains in an unmagnetized item, such as the original piece of metal in our experiment below, point in different directions.

When a metal gets magnetized, as when it is rubbed with a strong magnet, all like magnetic poles line up and point in the same direction. Atoms in ferromagnetic materials form formations known as domains. A domain is an internal region of a material in which groups of magnetic moments spontaneously align in the same direction. When the external field is withdrawn, the domain walls are pinned in their new orientation, and the aligned domains generate a magnetic field. This is what happens when a ferromagnetic material is "magnetized" and transformed into a permanent magnet.

Learn more about magnetic here-

https://brainly.com/question/3160109

#SPJ4

The head loss doubles when the average velocity is doubled.

The vector quantity velocity (v), denoted by equation v = s/t, quantifies dislocation (or shift in position, s), over change in time (t).

Velocity is the pace and direction of the an object's movement, whereas speed is the timekeeping at which an object is travelling along a path.In other words, velocity is a vector, whereas speed is indeed a scalar value.

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ4

In quantum mechanics, an eigenfunction is a function that satisfies a particular differential equation and is used to describe the behavior of a physical system. An eigenvalue is a scalar value that corresponds to an eigenfunction and represents the magnitude of a physical property of the system.

An example of an eigenfunction in quantum mechanics is the wavefunction, which is used to describe the probability distribution of a particle in a particular state. The wavefunction is an eigenfunction of the Schrödinger equation, which is a fundamental equation in quantum mechanics that describes the time evolution of a physical system.

An example of an eigenvalue in quantum mechanics is the energy of an atom in a particular state. The energy of an atom is an eigenvalue of the Hamiltonian operator, which is a mathematical operator that describes the energy of a physical system.

In general, eigenfunctions and eigenvalues play a central role in the analysis of quantum mechanical systems and are important tools for understanding the behavior of particles at the atomic and subatomic scales.

Learn more about quantum mechanics here: https://brainly.com/question/23780112

The x is the number of hours. want to determine the probability (P) x >= 13 To convert it to a percentage, multiply it by 100, yielding 84.13%.

Probability is simply the likelihood of something occurring. When we are uncertain about the result of an event, we might discuss the probabilities of several outcomes—how likely they are. Statistics is the study of occurrences guided by probability. If x is N(14,1), it can be transformed to N(0,1) using z = (x - mean) / standard deviation and the probability can be calculated using a conventional normal probability table.

P(x > 13)

= P(z > (13 - 14)/1)

= P(z > -1)

= 1 minus P(z -1)

= 1 minus 0.1587

= 0.8413

To convert it to a percentage, multiply it by 100, yielding 84.13%.

Learn more about conventional here-

https://brainly.com/question/28222820

#SPJ4

Answer:

B. Wechsler tests distinguishes between general and specific intelligence; Stanford-Binet tests did not.

Explanation:

One of the main differences between the Wechsler and Stanford-Binet tests is that the Wechsler tests distinguish between general and specific intelligence. This means that the Wechsler tests provide separate scores for different types of intelligence, such as verbal comprehension and perceptual reasoning, whereas the Stanford-Binet tests did not. Additionally, the Wechsler tests measure a wider range of abilities than the Stanford-Binet tests, including musical ability and memory. The Wechsler tests also do not use the concept of mental age, which was a key feature of the Stanford-Binet tests.

Higher temperatures or lower activation energies result in more sufficiently energetic collisions, which increases the fraction of such collisions, increases the value of k, and increases reaction rates.

The consequences are explained by the collision theory. These variables include temperature, catalysts, surface area, concentration, and reactant type. Each of these influences raises the number and energy of collisions, which increases reaction rate.

The hypothesis states that responding particles usually collide without reacting. For interactions to take place, reacting particles need to collide with enough energy, in the appropriate direction, and with enough mass.

To know more about  energetic collisions visit:

https://brainly.com/question/15069162

#SPJ4

Answer:

let the first point be a second be b third be c fourth be d and last point be e.

The point a and d are incorrect. because tye plotting of the is incorrect

Answer:

ω = (K / M)^1/2   fundamental frequency for Simple Harmonic Motion

ω = (49 kg-m / (sec^2 - m) * 7.2 kg)^1/2 =  2.61 /sec

F = -K A    Hooke's Law and spring constant

A = 7.2 kg * 9.80 m/s^2 / 49 n/m = 1.44 m       amplitude

V =  ω A = 2.61 / sec * 1.44 m = 3.6 m/s        maximum speed

Answer: D. 34.03

Explanation:

To solve this problem, we can use the equation for the conservation of energy, which states that the change in internal energy of a closed system is equal to the heat added to the system. We can express this equation as follows:

Answer:

Below

Explanation:

When the switch is closed the circuit is complete....the coil in the circuit will act as a solenoid magnet and draw the iron in thus raising the sign.

Answer:

The equation for the velocity component in the x-direction is : vx(t) = v(0) Cosθ.

Explanation:

here v(0) is the initial velocity

The scenario that involves at least one chemical change happening is your summer job for the year is to pick strawberries. At the end of the day, you have to crush the ones turning rotten to make strawberry jam. The correct option is D.

When bonds between molecules or atoms are created, disrupted, or both, chemical changes result. This implies that a substance with a particular set of properties—such as melting point, color, flavor, etc.—becomes a substance with a different set of characteristics.

Three essential chemical components are used in the production of jam: Acids, sugar, and pectin.

Therefore, the correct option is D, Your summer job for the year is to pick strawberries. At the end of the day, you have to crush the ones turning rotten to make strawberry jam.

To learn more about chemical change, refer to the link:

https://brainly.com/question/29923908

#SPJ1

The ratio of k is equal towards the temperature constant for such reaction constants at a certain temperature, and the values of the rate constants for the forward or reverse reactions are concentrations at that temperature.

A forward response is a reversible reaction wherein products are created from reactants so it moves from left to right. A reversible reaction that moves from right to left is referred to as a backward reaction since reactants are created from products.

In some oxidation processes, the reaction's products might combine to form the reactants' original form. Reversible reactions are what they are referred to as. To illustrate them, use the formula: A + B C + D.

To know more about  reversible reaction visit:

https://brainly.com/question/16614705

#SPJ4

The values of the rate constants for the forward or reverse reactions are concentrations at that temperature, and the ratio of k is equal towards the temperature constant for such reaction constants.

Why is a reaction reversible?

A chemical reaction that is reversible occurs when the reactants generate products, which then combine to return the reactants to their original state.

When the rate of the forward reaction and the rate of the reverse reaction are equal, equilibrium is reached. At equilibrium, the concentrations of all the reactants and products are fixed. The amount of reactant to product in a chemical reaction can be compared to derive the equilibrium constant, which is used to predict chemical behavior. The rate constants are fixed at some temperature.

To learn more about equilibrium constant use link below:

https://brainly.com/question/19340344

#SPJ4

The general driving forces behind most chemical interactions is the need for atoms to be electrically neutral and to complete their outer electron orbital area (shell).

When both the cases are fulfilled i.e. when the enthalpy change is negative and the entropy change is positive, the reaction is said to be spontaneous and thus enthalpy and entropy are the two thermodynamic driving forces of chemical reactions.

There are several factors that affects the driving force:

1. Release of heat (exothermic reactions are driven)

2. Free energy – the change in free energy should be negative

3. Entropy – An increase in entropy drives a reaction

4. Equilibrium Shift - Removal of products drives the reaction

The general driving forces behind most chemical interactions is the need for atoms to be electrically neutral and to complete their outer electron orbital area (shell).

To know more about driving forces,

https://brainly.com/question/24378707

#SPJ4

Answer:

39.04 J

Explanation:

Definition of work

[tex]W=fd[/tex]

[tex]W=[/tex] Work

[tex]f=[/tex] force

[tex]d=[/tex] displacement

In this case,

[tex]f=6.4[/tex]

[tex]d=6.1[/tex]

[tex]W=6.4*6.1[/tex]

[tex]W=39.04[/tex]

Answer:

1000m

Explanation:

Pressure = p x g x h

0.1 x 10^6 = 10 x 10 x h

(0.1 x 10^6) / 100

h = 1000m

I hope my answer helps you.

(a) The shell's horizontal range is determined as 286,138.2 m.

(B) The time of motion of the shell is 273.4 s

The horizontal range of the shell is the horizontal distance travelled by the shell and it is calculated by applying the following formula as shown below.

R = u² sin (2θ) / g

where;

R = ( (1.7 x 10³)² x sin ( 2 x 52 ) ) / ( 9.8 )

R = 286,138.2 m

The time of motion of the shell is calculated as follows;

T = 2u sinθ / g

T = ( 2 x 1.7 x 10³ x sin 52 ) / ( 9.8 )

T = 273.4 s

Thus, the time of motion of the shell is the time spent in air by the shell.

Learn more about range of projectile here: https://brainly.com/question/12870645

#SPJ1

The momentum of the blobs after the collision of a 1 kg blob of putty moving at 10 m/s with another 1 kg stationary blob will be 5 m/s.

The term "completely inelastic collision" is used to describe every time two masses cling together after colliding. Any inelastic collision will result in the internal energy of the objects being transformed into kinetic energy. Because of this, even though the system's energy is conserved (no outside forces are at action), its internal energy is changing in an unknowable and unpredictable fashion. This implies that the concept of energy conservation in inelastic collisions is absolutely meaningless to us. However, the conserved quantity that we can monitor is momentum.

Initial momentum is expressed as p = m1v1 + m2v2,

where, I denotes vector quantities.

v2 = 0  (because the second blob is at rest).

As a result, p=m1v1, |p|=m1|v1|=1*10= 10 kg*m/s,

The total amount of momentum is conserved in a closed system. The end momentum is 10 kg*m/s and is therefore also directed in the same direction as the beginning momentum.

The combined mass is now M=m1+m2= 1+1 = 2 kg due to the fact that two blobs are now clumped together. As a result, p = mv= 10 =2v; from this, v= 10/2 = 5 m/s, headed in the same direction as the first blob's starting velocity.

To learn more about momentum visit;

https://brainly.com/question/24030570

#SPJ4

The psychologist who emphasizes the social learning perspective explain this behavior would say that Ibrahim has observed others who model aggressive behavior. Option B

According to social psychology, aggression refers to any conduct or action intended to hurt a person, an animal, or cause physical injury to property. Here are a few instances of aggressive behavior: physical harm. screaming, cursing, and foul language.

Aggression is an overt or covert social engagement that is frequently harmful and intended to cause harm to another person.

Aggressive behavior is forceful, reactive, and impulsive behavior that frequently leads to breaching social norms or the law.

Read more on aggression here https://brainly.com/question/1167735

#SPJ1

The period of oscillation of the sphere is 161 seconds.

What is oscillation?

Oscillation is the repetitive movement of a particle or system about a central position or equilibrium point. Oscillations can occur in a variety of forms, such as periodic oscillations (which repeat at regular intervals), damped oscillations (which gradually decrease in amplitude over time), and driven oscillations (which are driven by an external force).

To find the period of oscillation of the sphere, you need to know its angular frequency, which is given by the following formula:

angular frequency = sqrt(k / I)

where k is the angular spring constant (also known as the torsional spring constant), and I is the moment of inertia of the sphere.

The angular spring constant is given by the following formula:

k = torque / angle of twist

Plugging in the values from the problem, you get:

k = 0.20Nm / 0.85rad = 0.235Nm/rad

The moment of inertia of a solid sphere is given by the following formula:

I = (2/5) * mass * radius^2

Plugging in the values from the problem, you get:

I = (2/5) * 95kg * (15cm)^2 = 6750kg*cm^2

Plugging these values into the formula for angular frequency, you get:

angular frequency = sqrt(0.235Nm/rad / 6750kg*cm^2) = 0.0062rad/s

The period of oscillation is the reciprocal of the angular frequency, so you can calculate it using the following formula:

period = 1 / angular frequency

Plugging in the value for angular frequency that you calculated above, you get:

period = 1 / 0.0062rad/s = 161s

Therefore, the period of oscillation is 161 seconds.

To learn more about oscillation from the given link:

https://brainly.com/question/26449711

#SPJ4

The time required for each new whole cycle to be generated is 0.25 s. So answer e is correct.

Sinusoidal water waves are a type of wave that is generated in a large ripple tank. These waves travel at a rate of 20cm/s and their adjacent crests are 5 cm apart. The time required for each new whole cycle to be generated is dependent upon the velocity of the wave and the distance between the adjacent crests.

To calculate the time required for a new whole cycle to be generated, we must first determine the wavelength of the wave. The wavelength is equal to the distance between the adjacent crests, which is 5 cm. Now that we know the wavelength, we can use the formula

v=λ/t

where v is the velocity of the wave (20 cm/s), λ is the wavelength (5 cm), and t is the time required for one cycle to be generated.

By substituting the given values into the equation, we can calculate the time required for one cycle to be generated.

t=λ/v,

so t=5 cm/20 cm/s,

or t=0.25 s.

Therefore, the time required for each new whole cycle to be generated is 0.25 s.

Learn more about Sinusoidal waves at : https://brainly.com/question/28449631

#SPJ4

the refrigeration capability, in tons, is 4.905 tons, the coefficient of performance, in kW, is 4.17 KW, and the compressor power, in kW, is 4.1336 KW.

Electrical Expense = HP *.746 * hours * Kw cost * motor efficiency. As an illustration, consider a 50 HP compressor that consumes $.06 per Kwh of electricity and has a 90% efficiency electric motor. $5,172.26 is the yearly cost for 50 HP multiplied by.746 over 2,080 hours.

In order to create energy which can be kept in a tank for later use, air compressors work by applying pressure to atmospheric air. Similar to an open balloon, when the compressed air is purposefully released, pressure builds up, transforming the potential energy into productive kinetic energy.

To know more about compressor visit;

https://brainly.com/question/28963656

#SPJ4

one of released energy for each coulomb of charge that travels across electrodes with a one volt potential difference. V joule, J/C is the correct way to describe this relationship.

A tool that transfers electricity from just an instrument to something like a patient for therapy or surgery. Examples include a tiny metal plate or needle. In order to help recorders diagnose certain problems, electrodes can also transport electrical impulses from the heart, brain, muscles, skin, or other physiological regions.

An electrode is a conductor for electricity that establishes electrical contact with nonmetallic components of a circuit, like an electrolyte, a semiconductor, or a vacuum. This may also go by the names anode or cathode if it is a part of an electrochemical cell.

To know more about electrodes visit:

https://brainly.com/question/17060277

#SPJ4

The most difficult issue about developing a research topic can be to raise the right questions, while strategies to use when we already have information about how to develop a quality topic is to develop suitable experiments and or observational procedures.

The scientific method is a series of well organized steps used to collect scientific information, which is first based on observation of the real words that can be used to raise questions in order to understand such observations.

Subsequently, the scientific method requires raising explanations or hypotheses which may be tested (either confirmed or rejected) by experiments and or observational procedures.

Therefore, with this data, we can see that the scientific method is based on asking the right questions, which then leads us to develop experimental procedures or also observations in order to test the working hypothesis.

Learn more about the scientific method here:

https://brainly.com/question/17216882

#SPJ1

Answer: 3 (c)

Explanation: The only force acting on the object is the force of gravity, mg, which acts straight downward. Even though the object has horizontal velocity, there is no horizontal force after the object is done being thrown.