Answer:
If the speed of the merry-go-round doubles, the force you will need to exert to hang on is 400 N.
Explanation:
Given;
initial force exerted to hang on, F₁ = 100 N
The force exerted on the merry-go-round in order to hang on must be an inward force known as centripetal force.
Centripetal force is given by;
[tex]F_c = \frac{mv^2}{r} \\\\keeping \ "m" \ and \ "r" \ constant, we \ will \ have \ the \ following \ equation;\\\\\frac{F_c_1}{v_1^2} = \frac{F_c_2}{v_2^2} \\\\F_c_2 = \frac{F_c_1*v_2^2}{v_1^2}\\\\when \ the \ speed\ doubles \ i.e, v_2 = 2v_1\\\\ F_c_2 = \frac{F_c_1*(2v_1)^2}{v_1^2}\\\\ F_c_2 = \frac{F_c_1*4v_1^2}{v_1^2}\\\\F_c_2 = F_c_1 *4\\\\F_c_2 = 4(F_c_1)\\\\F_c_2 = 4 (100 \ N)\\\\F_c_2 = 400 \ N[/tex]
Therefore, If the speed of the merry-go-round doubles, the force you will need to exert to hang on is 400 N.
Wind comes from the Sun
WWW.
A heating up the Earth's surface unevenly
B being brighter during the day
C blasting wind to the Earth
D heating up the air.
Answer:
I am pretty sure is either C or D hope this helps
Answer:
A heating up the Earth's surface unevenly
Explanation:
Wind comes from the sun heating up the earth's surface unevenly. This causes air masses to have different temperatures. Differences in temperature causes the density of the air masses on the earth surface to differ.
This leads to the movement of air from regions of high density to places with low density. Therefore, convection cells are then set up by the implication of this. The movement of the air masses causes wind.True or False when an object speeds up it gains momentum
Answer: True
Explanation:
If you start at a speed of 4m/s and slow down to 2m/s in 4s what is your
acceleration?
Answer:
penis
Explanation:
What causes rain?
a.air becomes filled with water vapor
b.water vapor condenses on dust particles
c. dust particles can no longer support water droplets
Answer:
the awnser is A
Explanation:
Brainliest Please
Answer:
A
Explanation
Within a cloud, water droplets condense onto one another so its causing so its causing the droplets to grow when they have grown to heavy the fall causing rain.
A school bus drives north and then east through the city as it takes students to school. The bus crosses a city block every 10 seconds. If all the city blocks are the same length, what can be said about the motion of the bus?
Answer:
The bus is moving at a constant speed.
Explanation:
We have the following facts from the question;
- The bus crosses a city block every 10 seconds.
- all the city blocks are the same length
Since all the city block are the same length, let's say the distance is d.
Since it crosses the city block every 10 seconds, we know that;
Speed = distance/time
Thus, Speed = d/10
Thus,it is moving at this speed of d/10 all through.
Therefore we can conclude that the bus is moving at a constant speed.
David Wetterman drops a 5 kg watermelon from the top of a 30 m building. What is the velocity of the watermelon as it smashes
into the ground (neglecting air resistance)?
-(1)
A)
24.25 m/s
B)
32.45 m/s
C)
60 m/s
D)
588 m/s
Answer:
A. 24.25 m/s
Explanation:
velocity = [tex]\sqrt{2 * g * d}[/tex]
velocity = sqr 2 * 9.8 * 30 = sqr 588 = 24.25 m/s
The velocity of the watermelon as it smashes into the ground will be 24.2 m/s
State the third equation of motion?
The third equation of motion is -
v² - u² = 2aS
Given David Wetterman drops a 5 kg watermelon from the top of a 30 m building.
Height of building [S] = 30 m
Mass of watermelon [M] = 5 Kg
Initial velocity [v] = 0 m/s
acceleration [g] = 9.8 m/s²
Using the third equation of motion -
v² - u² = 2aS
v² = 2aS
v² = 2 x 9.8 x 30
v² = 588
v = 24.2 m/s
Therefore, the velocity of the watermelon as it smashes into the ground will be 24.2 m/s.
To solve more questions on Kinematics, visit the link below-
https://brainly.com/question/15319811
#SPJ2
A tennis ball moves 18 meters northward, then 22 meters
southward, then 14 meters northward, and finally 28 meters
southward.
Answer:
The distance moved is 82 m.
The displacement is 18 m to the south.
Explanation:
The distance is a measure of the total length traveled along the path, while the displacement only takes into account the length between the starting position (departure) and final position (arrival). That is, distance refers to how much space an object travels during its movement, being the amount moved, while displacement refers to the distance and direction of the final position with respect to the initial position of an object.
So, the distance being the sum of the distances traveled, you get:
18 m + 22 m + 14 m + 28 m= 82 m
The distance moved is 82 m.
You know that the tennis ball moves 18 meters to the north, then 22 meters to the south, then 14 meters to the north, and finally 28 meters to the south. Then the tennis ball moves:
northward: 18 m + 14 m= 32 mto the south: 22 m + 28 m= 50 mCalculating the displacement as the difference between the final position and the initial position, you get:
displacement= 50 m - 32 m= 18 m
The displacement is 18 m to the south.
A bug crawls 2.25 m along the base of a wall. Upon reaching a corner, the bugs direction of travel changes from south to west. THe bug that crawls 3.15 m before stopping. What is the magnitude of the bugs displacment?A) 5.40 m.B) 2.72m.C) 3.45 m.D) 3.87 in.E) 4.29 m.
Answer:
The magnitude of the bugs displacement is 3.87 m
Explanation:
An illustrative diagram for the scenario is given in the attachment below.
In the diagram, the bug's displacement is given by x. The diagram shows a right angle triangle with x as the hypotenuse. We can determine x from the Pythagorean theorem which states that " the square of the hypotenuse equals sum of squares of the other two sides". That is
x² = 2.25² + 3.15²
x² = 5.0625 + 9.9225
x² = 14.985
x = √14.985
x = 3.87 m
Hence, the magnitude of the bugs displacement is 3.87 m.
Calculate the gravitational potential energies of the melon and the pomegranate. Which one has potential energy
Answer:
The mellon
Explanation:
I just know
An electric circuit, powered by a voltage of 100 V, absorbs a power of 4.41 kW; calculate the intensity of the current that runs through the circuit and the energy absorbed by it in 2 hours and 15 minute
Answer:
I = 44.1[amp]
P = 9.92 [kw-hr]
Explanation:
We know that electrical power can be calculated by means of the following expression.
[tex]P=V*I[/tex]
where:
P = power = 4.41 [kW] = 4410 [w]
V = 100 [V]
I = current [amp]
Now we have:
[tex]I=P/V\\I = 4410/100\\I = 44.1 [amp][/tex]
Now the power absorbed during this time is equal to the product of power by time.
[tex]15[min]*\frac{1hr}{60min} =0.25 [hr][/tex]
t = time = 2.25 [hr]
[tex]P_{ab}=4.41*2.25\\P=9.92[kW-hr][/tex]
How much work would be done on a particle with 5.0 C of charge on it if it moved from an equipotential line at 5.5 volts to another equipotential line at 3.5 volts?
Answer:
10J
Explanation:
In this question we have the following information
The charge of the particle is q = 5 C
The equipotenetial level is V1 = 5.5 v
and also the
equipotenetial level is V2 = 3.5 v
So we calculate the
work done W=q x (v1-v2)
workdone = 5 x (5.5-3.5)
= 5x2
=10 J
Workdone = 10 J
So we conclude that the workdone on a particle with these information is 10j
What is the most frequent method used to slow a vehicle that is done by releasing pedal pressure
trail braking
controlled braking
threshold braking
coasting
Answer: Trail Braking!
Explanation: Trail braking is used to smoothly and gradually reduce brake pedal pressure at the end of a braking maneuver.
Option A. trail braking.
What is trail braking and how do you do it?In four-wheel vehicles, trail braking is using the brakes past the corner entrance, as opposed to the normally taught practice of releasing the brakes before starting the turn. It creates weight transfer to the front tires, increasing their traction and reducing understeer.
What is the purpose of trail braking?Trail-braking allows a driver to brake later by extending the braking zone into the corner. It also improves the car's turn-in response by increasing the load on the front tires to maximize grip. Together, these result in higher corner entry speed and reduced time through the corner.
Learn more about trail braking at
https://brainly.com/question/19755465
#SPJ2
What is the magnitude of the change in potential energy of the block-spring system when it travels from its lowest vertical position to its highest vertical position?
Answer:
ΔU = 2 mg h
Explanation:
In a spring mass system the potential energy is U = m g h
where h is measured from the equilibrium point of the spring
the potential energy at the highest point is
U₁ = m g h
the potential energy at the lowest point is
U₂ = m g (-h)
instead in this energy it is
ΔU = 2 mg h
In this two points the kinetic energy is zero, but there is elastic potential energy that has the same value in the two points, so its change is zero
Potential energy is defined as the energy stored in a body which may convert into kinetic energy when moved.
The Formule of the potential energy is [tex]mgh[/tex] The correct answer is 0
Hence, [tex]U = 2 mg h[/tex]
The H stated as the measured from the equilibrium point of the spring
Therefore, the potential energy at the maximum point is [tex]U_1 = m g h[/tex] and the potential energy at the minimum point is [tex]U_2 = m g (-h)[/tex]
Hence, after solving it we got
[tex]U_1 -U_2 = 2 mg h[/tex]
Therefore, the energy change in the process is 0.
For more information, refer to the link:-
https://brainly.com/question/2127750
Define Hydrostatic Equilibrium
Answer:
well, in my view,
In fluid mechanics, hydrostatic equilibrium or hydrostatic balance (also known as hydrostasy) is the condition of a fluid or plastic solid at rest. This occurs when external forces such as gravity are balanced by a pressure-gradient force.
What does fitness means to you
Answer:
Exercising, yoga
Explanation:
Suppose you put an ice cube into a cup of hot tea. In what direction does energy in the form of heat flow? What happens to the ice cube as this flow of energy occurs?
Answer:
The energy flows between the ice and the tea equally. The table below shows the temperatures of several different objects made of the same material.
If the initial oscillation of the pendulum has an amplitude of 2.5m , what is the amplitude d of oscillation after 20 s ?
Answer:
The value is [tex]y = 0.0458 \ m[/tex]
Explanation:
From the question we are told that
The initial amplitude is A = 2.5 \ m
The time considered is t = 20 s
Generally the amplitude at time t is mathematically represented as
[tex]y = Ae^{- \frac{t}{\tau} }[/tex]
Here [tex]\tau[/tex] is the time constant let assume the value to be [tex]\tau = 5 \ s[/tex]
So
[tex]y = 2.5 * e^{- \frac{20}{5} }[/tex]
=> [tex]y = 0.0458 \ m[/tex]
When the current through a circular loop is 6.0 A, the magnetic field at its center is 2.0 * 10-4 T. What is the radius of the loop?
Answer:
ill get back to this question once i get the answer
The radius of the loop is 13 cm
To find the radius of the loop, the values are given as,
Current I = 6A
Magnetic field, B = 2* 10⁻⁴ T
How to find the radius of the loop?The magnetic field in a circular loop will have same magnitude and direction. The current carrying loops will be formed due to the magnetic field and there will be n times of loops adds up for every turns.
Formula for magnetic field in the circular loop is,
B = µ₀ I 2R Tesla
Here, we have to find the radius of the loop,
R = B / µ₀ I × 2
µ₀ = 4π × 10-7 H/m.
Substituting all the values in the equation,
R = ( 2 × 10⁻⁴ ) / ( 4π × 10-7 × 6 × 2)
= ( 2 × 10⁻⁴ ) / ( 0.0000150796)
Radius, R = 13 cm
Thus, the radius of the loop is 13 cm.
Learn more about magnetic field in circular loop,
https://brainly.com/question/27549038
#SPJ2
. A car going initially with a velocity 15 m/s accelerates at a rate of 2 m/s2 for 10 seconds. It then accelerates at a rate of -1.5 m/s until stop. Find the car’s maximum speed. Calculate the total distance traveled by the car.
Answer:
The maximum speed of the car is 35 m/s
The total distance traveled by the car is 658.33 m
Explanation:
Given;
initial velocity of the car, u = 15 m/s
acceleration of the car, a = 2 m/s²
time of car motion, t = 10 s
(i)
Initial distance traveled by the car is given by;
d₁ = ut + ¹/₂at²
d₁ = (15 x 10) + ¹/₂(2)(10)²
d₁ = 150 + 100
d₁ = 250 m
The maximum speed of the car during this is given by;
v² = u² + 2ad₁
v² = (15)² + (2 x 2 x 250)
v² = 1225
v = √1225
v = 35 m/s
(ii)
The final distance cover by the car during the deceleration of 1.5 m/s².
Note: the final or maximum speed of the car becomes the initial velocity during deceleration.
v² = u² + 2ad₂
where;
v is the final speed of the car when it stops = 0
0 = u² + 2ad₂
0 = (35²) + (2 x - 1.5 x d₂)
0 = 1225 - 3d₂
3d₂ = 1225
d₂ = 1225 / 3
d₂ = 408.33 m
The total distance traveled by the car is given by;
d = d₁ + d₂
d = 250 m + 408.33 m
d = 658.33 m
If you were standing at the center of a circular wave what would you see in all directions?
a.waves moving away from you
b.waves moving towards you
c.waves moving across you
d.no movement at all
What would happen if there is more male hyenas than female hyenas in a population?
Choices:
Male hyenas will compete to mate with the females.
Some male hyenas will die.
Male hyenas for wait for more females to join the population.
Answer:
Option 1
Explanation:
I always see animals do that
A school track team member ran for a total of 15.85 miles in practice over 5 days. How many miles did he average per day?
[tex]{\underline{\pink{\textsf{\textbf{ Answer : }}}}}[/tex]
➡ 15.85/5
➡ 3.17 ans.
A solid sphere rolling without slipping on a horizontal surface. If the translational speed of the sphere is 2.00 m/s, what is its total kinetic energy?
Answer:
The total kinetic energy is 2.8m J. (NOTE: m is mass of the sphere)
Explanation:
The total kinetic energy of a sphere is given by the sum of the rotational kinetic energy and the translational kinetic energy. That is,
[tex]K_{Total} = K_{R} + K_{T}[/tex]
The rotational kinetic energy [tex]K_{R}[/tex] is given by
[tex]K_{R} = \frac{1}{2}I\omega^{2}[/tex]
Where [tex]I[/tex] is the moment of inertia
and [tex]\omega[/tex] is the angular velocity
The translational kinetic energy [tex]K_{T}[/tex] is given by
[tex]K_{T} = \frac{1}{2}mv^{2}[/tex]
Where [tex]m[/tex] is the mass
and [tex]v[/tex] is the translational speed (velocity)
∴ [tex]K_{Total} = \frac{1}{2}I\omega^{2} + \frac{1}{2}mv^{2}[/tex]
But, the moment of inertia [tex]I[/tex] of a sphere is given by
[tex]I = \frac{2}{5}mr^{2}[/tex]
Where [tex]m[/tex] is mass
and [tex]r[/tex] is radius
∴ [tex]K_{Total} = \frac{1}{2}\times \frac{2}{5}mr^{2} \omega^{2} + \frac{1}{2}mv^{2}[/tex]
[tex]K_{Total} = \frac{1}{5}mr^{2} \omega^{2} + \frac{1}{2}mv^{2}[/tex]
Also, [tex]\omega = \frac{v}{r}[/tex]
∴ [tex]\omega^{2} = \frac{v^{2} }{r^{2} }[/tex]
Then,
[tex]K_{Total} = \frac{1}{5}mr^{2} \times \frac{v^{2} }{r^{2} } + \frac{1}{2}mv^{2}[/tex]
[tex]K_{Total} = \frac{1}{5}mv^{2} + \frac{1}{2}mv^{2}[/tex]
∴ [tex]K_{Total} = \frac{7}{10}mv^{2}[/tex]
From the question, [tex]v = 2.00 m/s[/tex]
Then,
[tex]K_{Total} = \frac{7}{10}m(2.00)^{2}[/tex]
[tex]K_{Total} = \frac{7}{10}m\times 4.00[/tex]
[tex]K_{Total} = 2.8m J[/tex]
Hence, the total kinetic energy is 2.8m J. (NOTE: m is mass of the sphere)
In principle, when you fire a rifle, the recoil should push you backward. How big a push will it give? Let's find out by doing a calculation in a very artificial situation. Suppose a man standing on frictionless ice fires a rifle horizontally. The mass of the man together with the rifle is 70 kg, and the mass of the bullet is 10 g. If the bullet leaves the muzzle at a speed of 500 m/s, what is the final speed of the man?
Answer:
Explanation:
m1v1=m2v2
m1=70 kg
m2=10 g=0.01 kg
v2=500 m/s
m1v1=m2v2
v1=m2v2/m1
v1=0.01*500/70
v1=0.07
A scuba diver wears weights as well as a buoyancy compensator to establish neutral buoyancy while diving. The buoyancy compensator can either be inflated with air or the air in it can be released. Explain how a scuba diver uses the buoyancy compensator to dive and to rise back to the surface.
Answer:
With more air is more buoyancy. When deflated or released the scuba diver is less buoyant.
Explanation:
The compensator is a Buoyancy control device that has an inflatable air bladder.When we have more air out into the inflatable bladder, then one is more buoyant. If the air is released from the bladder, then one is less buoyant. We add air through an air inflation valve. Air is also then released using air-deflation valves.
Buoyancy can be defined as an upward force which is exerted on an object that is fully or partially immersed in water
when one is less buoyant than water, it means that the upward pressure is more than the downward pressure of that person and his equipment. Then he will float. In a case of negative buoyancy, we have downward pressure of this person and his equipment to be more than the upward pressure of the water. Then sinking will happen.
How much work is done by the gravitational force on the block?
Answer:
Work = Mass * Gravity * Height and is measured in Joules. Imagine you find a 2 -Kg book on the floor and lift it 0.75 meters and put it on a table. Remember, that “force” is simply a push or a pull. If you lift 100 kg of mass 1-meter, you will have done 980 Joules of work.
Explanation:
A step-down transformer converts 120 V to 5 V in a phone charger. If the primary coil has 600 turns, how many turns are in the secondary coil? Show all work with correct answer and unit as well.
Answer:
25 turns
Explanation:
Given the following data;
Input voltage = 120V
Output voltage = 5V
Number of turns in primary coil = 600 turns
[tex] \frac {Ns}{Np} = \frac {Vs}{Vp} [/tex]
Where;
Ns is the number of turns on the secondary coil. Np is the number of turns on the primary coil. Vs is the voltage across the secondary coil (output voltage). Vp is the voltage across the primary coil (input voltage).Substituting into the equation, we have;
[tex] \frac {Ns}{600} = \frac {5}{120} [/tex]
Cross-multiplying, we have;
[tex] 120*Ns = 600*5[/tex]
[tex] 120Ns = 3000[/tex]
[tex] Ns = \frac {3000}{120}[/tex]
Ns = 25 turns
Therefore, the number of turns in the secondary coil is 25 turns.
Hence, it is a step-down transformer because the number of turns on the primary coil is greater than the number of turns on the secondary coil. Consequently, the output voltage (5V) will be lesser than the input voltage (120V).
A swinging door that weighs w=400.0Nw=400.0N is supported by hinges A and B so that the door can swing about a vertical axis passing through the hinges The door has a width of b=1.00m,b=1.00m, and the door slab has a uniform mass density. The hinges are placed symmetrically at the door’s edge in such a way that the door’s weight is evenly distributed between them. The hinges are separated by distance a=2.00m.a=2.00m. Find the forces on the hinges when the door rests half-open.
Answer:
SO I TESTED POSITIVE FOR CORONA IS A SIMPTOM DIEURREUH C SINCE I GOT CORNA I HAVE BEEN HAVE big DIEURREE UH
Explanation:
An 7.40 kg block drops straight down from a height of 0.83 m, striking a platform spring having a force constant of 9.50 102 N/m. Find the maximum compression of the spring.
Answer:
0.25 m.
Explanation:
mass of the block = 7.40 kg, height = 0.83 m, force constant of the spring = 9.50 x [tex]10^{2}[/tex] N/m.
The maximum compression on the spring can be determined by;
Potential energy stored in the spring = [tex]\frac{1}{2}[/tex] K[tex]x^{2}[/tex]
But, potential energy = mgh
So that,
mgh = [tex]\frac{1}{2}[/tex] K[tex]x^{2}[/tex]
7.4 x 9.8 x 0.83 = 9.50 x [tex]10^{2}[/tex] x [tex]x^{2}[/tex]
60.1916 = 9.50 x [tex]10^{2}[/tex] x [tex]x^{2}[/tex]
[tex]x^{2}[/tex]= [tex]\frac{60.1916}{9.50*10^{2} }[/tex]
= 0.06336
x = 0.2517
x = 0.25 m
The maximum compression of the spring is 0.25 m.
Give real-world examples of evidence that supports the evolution of Earth in each category:
Deposition -
Chemical weathering -
Volcanic eruption -
Answer:
concave shape of the waverock
Explanation:
The wave rock is formed by the weathering of the surrounding area. This helps in proving the deposition part, as the wave rock was below the ground, occurred due to deposition of rock years over the years. It is made from very tough material from its surroundings. The weathering reduces the surrounding terrain, while the bedrock remains to witness for the history. Also, volcanic eruptions have been changing earth for a long time. (first of all, the theory that a volcanic eruption helped in making dinos go extinct.) Real world examples include: Ash and sulfur went pretty high into Earth's atmosphere because of the Tambora eruption which in turn dimmed incoming sunlight, and lowered global temperatures by about 3°F. The Mount Pinatubo eruption in the Philippines in 1991 cooled the planet by about 1°F.