A. 1

B. 2

C. 3

D. 4

_______________________________________________________

Answer:The Solar System speed and Milky Way speed should be switched

Explanation:

The Milky Way speed and solar system speed should be switched with each other. Therefore, option (A) is correct.

The rotation of the earth can be described as the spinning of the Earth around its own axis. The axis has an angle of 23(1/2)° and it is perpendicular to the plane of the orbit of the earth. The northern and southern hemispheres lean in a direction away from the Sun because Earth is tilted on its axis. The rotation speed of the earth is 0.3 miles/sec.

The Revolution of the earth is the movement of the Earth around the Sun in a fixed path. The revolution speed of the earth is 30 Km/s or 18.5 miles/sec. The milky way speed of the earth is 370 miles/sec and the solar system speed of the earth is 130 miles/sec.

But according to Luca's chart, the milky way speed is 150 miles/sec and the solar system speed is 370 miles/sec.

Therefore, the solar system speed and Milky Way speed need to be switched.

Learn more about the speed of the earth, here:

https://brainly.com/question/14731026

#SPJ2

Answer:

They are made up of electrons, neutrons and protons

Explanation:

Answer:

823.2 J

Explanation:

PE = mgh

= (7 kg) (9.8 m/s^2) (12 m)

= 823.2 J

Answer:

Mass=m=7kg

Height=h=12m

Gravitational force=g=10m/s^2

[tex]{\boxed{\sf Potential\:energy{}_{(P.E)}=mgh}}[/tex]

[tex]{:}\longmapsto [/tex][tex]\sf P.E=7×12×10 [/tex]

[tex]{:}\longmapsto [/tex][tex]\sf P.E=84×10[/tex]

[tex]{:}\longmapsto [/tex][tex]\sf Potential\:energy=840Joule [/tex]

Answer:

compound

Explanation:

Answer:

Displacement reaction

Answer:

C₆H₈O₆

Explanation:

First off, the percent of oxygen by mass of vitamin C is:

Assume we have one mol of vitamin C. Then we would have 180 grams, of which:

Now we convert each of those masses to moles, using the elements' respective atomic mass:

So the molecular formula for vitamin C is C₆H₈O₆

Answer:

B (Quantitative)

Explanation:

a clever way to remember the difference between quantitative and qualitative is that there is a n in quantitative which is the first letter to the word number. So quantitative is an oberservation with numbers

Answer:

[tex]v=6.7\times 10^9\ mi/hr[/tex]

Explanation:

Given that,

The speed of light is 3×10⁸ m/s

We need to convert it into mi/hr.

Since, 1 mile = 1610 m

1 hour = 3600 s

So,

[tex]v=3\times 10^8\ \dfrac{m}{s}\\\\=3\times 10^8\ \dfrac{\dfrac{1}{1610}\ \text{miles}}{\dfrac{1}{3600}\ s}\\\\=6.7\times 10^9\ mi/hr[/tex]

So, the required speed of light is [tex]6.7\times 10^9\ mi/hr[/tex].

Answer:

Percent yield = 17%

Explanation:

Given data:

Actual yield of lithium chloride = 6.0 g

Theoretical yield of lithium chloride = 35.4 g

Percent yield = ?

Solution:

Formula:

Percent yield = (actual yield / theoretical yield )× 100

Now we will put the values in formula.

Percent yield = (6.0 g/ 35.4 g)× 100

Percent yield = 0.17 × 100

Percent yield = 17%

Answer:

A. An Atom

Explanation:

An atom is the smallest particle of an element, having the same chemical properties as the bulk element.

An atom of calcium is the smallest particle of calcium  that has the same chemical properties of calcium.

An atom is defined  as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each  atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged  and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom  as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ2

Answer:

D. Light waves travel fastest through a vaccumm

Explanation:

"In a vacuum , light waves move their fastest: 186,000 miles per second (300,000 kilometers per second). This is also the fastest that anything in the universe moves. But when light waves move through air, water or glass, they slow down."

Please mark me as brainliest! <3

Hopefully I could help! Good luck.

Answer:

Precipitation

Explanation:

In the water cycle, water experiences different phase changes from one state to another in nature.

The cycling affords water to in solid, liquid and the vapor form.

From the cycle show, W represents precipitation.

Answer:

precipitation

Explanation:

a. molality-m=1.623

b. molarity-M=0.3

a. Boiling point

[tex]\tt \Delta Tb=Kb\times m[/tex]

Kb for ethanol=1.22 °C/m

Boiling point for ethanol = 78.4 °C

ΔTb=80.38-78.4=1.98

[tex]\tt 1.98=1.22\times m\\\\m=\dfrac{1.98}{1.22}=1.623[/tex]

b. osmotic pressure

[tex]\tt \pi =MRT[/tex]

π = 7.65 atm

R = 0.08205 L/atm K

T = 37 + 273 = 310 K

[tex]\tt M=\dfrac{\pi}{RT}=\dfrac{7.65}{0.08205\times 310}=0.3~M[/tex]

Answer:

C I belive

Explanation:

The higher lattice energy in option a is for LiF. Similarly, MgS have higher lattice energy that NaCl and  MgO have higher lattice energy than RbI.

Lattice energy of a compound is the energy required to convert one mole of that compound into its constituent gaseous ions. Lattice energy increases as the size of the ion decreases. As well as, higher the charge of the ions higher will be the lattice energy.

In LiF and KBr, Li and F are the smaller ions and is having higher lattice energy. In the case of NaCl and MgS, Mg and S are having +2 charge and are smaller causes MgO higher in lattice energy.

Similarly in the case of MgO and RbI the same concept can be applied. Rb⁺ and I⁻ are bigger ions where as Mg²⁺ and O²⁻ are comparatively smaller and have higher charge result in higher lattice energy.

Thus compound which have higher lattice energy in option a is LiF, in option b is MgS and in option C is MgO.

To learn more about lattice energy, refer the link below:

https://brainly.com/question/17011733

#SPJ2

Answer:

Conduction is the process by which heat energy is transmitted through collisions between neighboring atoms or molecules. ... The fire's heat causes molecules in the pan to vibrate faster, making it hotter. These vibrating molecules collide with their neighboring molecules, making them also vibrate faster.

Explanation:

Answer:

Water-gas A mixture of carbon monoxide (CO) and hydrogen (H2) produced by passing steam over red-hot coke using the endothermic reaction C + H2O # CO + H2.

Explanation:

a.

Explanation: I saw it on another website.

Answer:

6.24 % of FeSO₄

Explanation:

Solute mass: 5.01 g of FeSO₄

Solvent mass: 75.3 g of water

Solution mass = solute mass + solvent mass

5.01 g + 75.3 g = 80.31 g

We can apply a rule of three. Mass percentage means the mass of solute which is contained in 100 g of solution. Then,

In 80.31 g of solution we have 5.01 g of solute

In 100 g solution, we may have (5.01  . 100)/ 80.31 = 6.24 g of solute.

This is the mass percentage: 6.24%

Answer:

[tex]Q=-213.84J[/tex]

Explanation:

Hello!

In this case, since energy involved when a substance undergoes a temperature change due to heat addition or removal is computed as shown below:

[tex]Q=mC\Delta T[/tex]

As the aluminum has a specific heat of 0.900 J/g°C and 14.4 g underwent such temperature decrease, the energy change is:

[tex]Q=14.4g*0.900\frac{J}{g\°C}(23.0\°C-39.5\°C)\\\\Q=-213.84J[/tex]

Which is an outlet energy flow.

Best regards!

Answer:3

Explanation:

I took the test

the correct answer is two

Answer:Leopard Frogs all together in a stream

Explanation:

Answer:

Answer:

I think its A

Explanation:

Hope this helps ;)

B.) have a better chance of colliding with other atoms.

The cellular respiration process, which generates ATP as the final result, employs oxygen and sugar as reactants. So, the correct option is A.

Cellular respiration is the process by which organisms combine oxygen with food molecules, channeling the chemical energy from those resources into life-sustaining activities while eliminating carbon dioxide and water as waste.

Both oxygen and glucose are reactants in the mobile respiratory system. ATP is the primary component of mobile respiration; waste products include carbon dioxide and water.

Oxygen might be present or absent while cells are respiring. Nonetheless, the activity is essentially known as "cellular respiration" because the cell seems to "respire" by consuming molecular oxygen (as an acceptor of electron) and exhaling carbon dioxide (as an end product).

Therefore, the correct option is A.

Learn more about Cellular respiration, here:

https://brainly.com/question/29760658

#SPJ7

Your question is incomplete, most probably the complete question is:

The process shown in the diagram produces oxygen and sugar. Which

process uses oxygen and sugar as reactants?

Chloroplast

Mitochondrion

Sugar

CO, +H,0

ATP

Heat

Respiration

A. Cellular respiration

B. Water cycle

c. Transpiration

D. Photosynthesis

Answer:

3.47 × 10⁻¹⁹ J

Explanation:

A yellow line occurs at 572.8 nm in the emission spectrum of phosphorus. When an electron undergoes this process, it requires an amount of energy to produce a photon of this light. We can calculate the energy (E) using the following expression.

E = h × c/λ

where,

E = 6.63 × 10⁻³⁴ J.s × 3.00 × 10⁸ m/s/5.728 × 10⁻⁷ m

E = 3.47 × 10⁻¹⁹ J

Answer:

6. 7870 kg/m³ (3 s.f.)

7. 33.4 g (3 s.f.)

8. 12600 kg/m³ (3 s.f.)

Explanation:

6. The SI unit for density is kg/m³. Thus convert the mass to Kg and volume to m³ first.

1 kg= 1000g

1m³= 1 ×10⁶ cm³

Mass of iron bar

= 64.2g

= 64.2 ÷1000 kg

= 0.0642 kg

Volume of iron bar

= 8.16 cm³

= 8.16 ÷ 10⁶

[tex] = 8.16 \times 10^{ - 6} \: kg[/tex]

[tex]\boxed{density = \frac{mass}{volume} }[/tex]

Density of iron bar

[tex] = \frac{0.0642}{8.16 \times 10^{ - 6} } [/tex]

= 7870 kg/m³ (3 s.f.)

7.

[tex]\boxed{mass = density \: \times volume}[/tex]

Mass

= 1.16 ×28.8

= 33.408 g

= 33.4 g (3 s.f.)

8. Volume of brick

= 12 cm³

[tex] = 12 \times 10^{ - 6} \: m^{3} \\ = 1.2 \times 10^{ - 5} \: m ^{3} [/tex]

Mass of brick

= 151 g

= 151 ÷ 1000 kg

= 0.151 kg

Density of brick

= mass ÷ volume

[tex] = \frac{0.151} {1.25 \times 10^{ - 5} } \\ = 12600 \: kg/ {m}^{3} [/tex]

(3 s.f.)

Answer:

Explanation:

we know that M1V1=M2V2

M1=0.100 M

V1=50.0*10^-3 L

M2=0.100 M

V2=M1V1/M2

V2=0.100*50.0*10^-3/0.100

V2=0.05

To know the end point we use phenolphthalein as indicator. End point is a point where completion of reaction happen. The volume of NaOH needed to reach the equivalence point if the concentration of the added base were 0.240 M is 20.8ml.

Titration is a technique by which we know the concentration of unknown solution using titration of this solution with solution whose concentration is known.

The balanced equation is

HCl+NaOH[tex]\rightarrow[/tex]NaCl+H₂O

Using following equation

M₁×V₁=M₂×V₂

Where,

M₁=molarity of HCl= 0.100 M

V₁=volume of HCl=50.0 mL

M₂=molarity of NaOH=0.240 M

V₂=volume of NaOH=?

Substituting the given values

0.100 M ×50.0 mL=0.240 M×V₂

V₂=20.8ml

Therefore, the volume of NaOH needed to reach the equivalence point if the concentration of the added base were 0.240 M is 20.8ml.

To know more about titration, here:

https://brainly.com/question/13307013

#SPJ5

Answer:

The Mass in Grams= 0.5145

Explanation:

The atomic mass of Na=23

The atomic mass of No3= 62

we multiply 0.0035×((23×1)+(62×2)) = 0.5145 grams

Answer:

Physical

Explanation: