Explanation:
A moon orbits in a roughly circular path around a planet with a mass of 8.6 x 1023 kg. The distance from the center of the moon to the center of the planet is 7.04 x 106 meters. Calculate the speed of the moon in m/s.
Identify three ways you could increase the rate of an aspirin tablet dissolving in a glass of water.
Answer:
If you are trying to dissolve a substance, you have three primary avenues to increase the dissolution rate: decreasing the particle size of the solid, increasing the temperature and/or increasing the mixing or stirring rate.
Explanation:
SUPPER EASY WILL GIVE BRAINLIEST NEED HELP ASAP
7. Which
pocess is an example of a chemical
change?
A. Salt mixes with water and
dissolves.
B. An aspirin tablet is crushed into a fine
powder.
C. Water droplets form on the outside of a
cold drink glass.
D. An antacid tablet is added to water and
bubbles are produced.
Answer:
Your answer will be (D).
Hope this helps!
Answer:
D
Explanation:
You can tell when a chemical change occurs if a gas is produced (bubbles), an odor is produced, if there is a color change, or if the surroundings get hotter or colder.
The rows in the periodic table are called periods. What is true about elements in the same period?
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct choice is ~ B
Their atomic numbers increase 1 from left to right ~
You have 2.567 grams of water. What is the volume of water(use correct units)
Answer:
2.567 mL
Explanation:
What is the molality of sodium chloride in solution that is 13.0% by mass sodium chloride and that
the solution has a density of 1.10 g/mL?
Answer:
2.4 M
Explanation:
1. Suppose you have 100 mL solution:
Use density to find grams of solution:
100 mL solution x (1.10 g / 1 mL) = 110 g solution
2. FInd the amount of sodium chloride pure:
110 g solution x(13 g NaCl / 100 g solution) = 14.3 g NaCl
3. Change grams to mol:
14.3 g NaCl x ( 1 mol NaCl/ 58.44 g NaCl) = 0.24 mol NaCl
4. Molarity:
M = mol NaCl / L solution
M = 0.24 mol NaCl / 0.1 L = 2.4 M
5. To investigate electrostatic forces between molecules in water and in ethanol, a student pours identical amounts of the liquids into two identical beakers. The student then places objects of different weights in the beakers. Which characteristic is the student most likely testing?
A. melting point
B. boiling point
C. surface tension
D. vapor pressure
The student then places objects of different weights in the beakers, surface tension is the characteristic is the student most likely testing.
What is surface tension ?Surface tension is the propensity for liquid surfaces that are at rest to condense into the smallest surface area. Razor blades and insects, which have a density greater than that of water, can float on the surface of the water without even becoming partially buried because of surface tension.
A liquid surface's ability to operate like a stretched elastic membrane is known as surface tension. Small liquid drops and soap bubbles have almost spherical shapes, which are indicators of these phenomena. Some insects can stand on the surface of water due to this characteristic.
Surface tension is a crucial factor in many industrial processes, such as detergent formulation, paint optimization, improved oil recovery, medicinal compound performance, and food product stability.
Thus, option C is correct.
To learn more about surface tension, follow the link;
https://brainly.com/question/11348644
#SPJ2
what are two factors that affect the boiling point of water
Answer:
purity and pressure affects boiling point
Pick the correct answer!
1. Why does the octet rule apply primarily to main-group elements, not to transition metals?
a. The octet rule states that main-group elements tend to react so that they attain a halogen electron configuration.
b. The octet rule states that transition metal-group elements tend to react so that they attain a noble gas electron configuration.
c. The octet rule states that main-group elements tend to react so that they attain a ionic electron configuration. d. The octet rule states that main-group elements tend to react so that they attain a noble gas electron configuration.
Answer:
I think it would be b. The octet rule states that transition metal group elements tend to react so that they attain a noble gas electron configuration.
identify each of the following changes of states as melting ,freezing,sublimation or deposition
a: ice sculpture start breaking down as temperature rise above 0 degree
Answer:
Melting
Explanation:
Ice begins to melt at 0 degrees celsius
Melting is from solid to liquid
Freezing is from liquid to solid
Sublimation is from solid to gas
Deposition is from gas to solid
Help please :) with this
Answer:
option C 5
hope this answer helps you dear! take care
Answer:
5, the coefficient is the number right before the variable. The ² and ³ (even though Mines on top and yours is on the bottom) are not coefficient because. . . well it just doesn't make sense.
Under what condition will the result of an experiment based on a hypothesis most likely lead to a new experimentation?
Answer:
When the results do not match the experimenter's predictions.
name 2 elements that are liquid at room temperature and describe their colour
Answer:
Bromine
Mercury
Bromine (symbol Br and atomic number 35) is a reddish-brown liquid, with a melting point of 265.9 K. Mercury (symbol Hg and atomic number 80) is a toxic shiny silvery metal, with a melting point of 234.32 K.
An atom contains 32 protons and 48 neutrons.
(a) What is its atomic number?
(b) How many electrons does it have?
(c) What is the mass of the atom?
Answer:
The answer to these are:
(A) 32
(B) If it is balanced 32
(C) 80
Explanation:
please help me! giving brainliest!!
Answer:
It is a covalent bond because both carbon and oxygen are nonmetals. The formula will be CO² because the electrons between the atoms are being shared equally.
Answer:
Option C
Explanation:
CO₂ is a covalent bond because we know that both elements are nonmetals. The carbon atoms shares 2 electrons with each oxygen atom and each oxygen atom shares two electrons with the carbon atom. CO₂ forms a nonpolar covalent bond, meaning that the electrons are shared equally.
What do we call the repeating units of a larger molecule?
Answer:
Brainlest
Explanation:
A polymer is a molecule made up of repeating units. These units, called “monomers”, form a long molecular chain. It might have branches, or it might just be one straight line of molecules, each connected in the same way. A monomer of polyethylene
Calculate energy output (ATP production) of full oxidation of saturated fatty acid with 24 carbons in the chain?
..
Explain
Which two metals shown won't make a solid when combined with anything? 2.2.2
Answer:
aluminum Zicam iron
Explanation:
Which metals dont react with anything?
Metals like aluminium, iron and zinc do not react either with cold or hot water. But they react with steam to form the metal oxide and
Ethanol (C₂H₆O) is combusted in air according to the following reaction: C₂H₆O(l) + O₂(g) → CO₂(g) + H₂O(l) How many moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen?
2.89 moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen.
According to this question, the following reaction between ethanol and oxygen is given:C₂H₆O(l) + O₂(g) → CO₂(g) + H₂O(l)However, this equation is not balanced. The balanced equation is as follows:C₂H₆O + 3O₂ → 2CO₂ + 3H₂OAccording to this equation, 1 mole of ethanol produces 3 moles of water. We convert 44.5g of ethanol to moles by dividing by its molar mass as follows:mole = 44.5g ÷ 46.07g/molmole = 0.966mol of ethanolIf 1 mole of ethanol produces 3 moles of water.0.966mol of ethanol will produce (0.966 × 3) = 2.89molTherefore, 2.89 moles of water would be produced by the complete combustion of 44.5 grams of ethanol in the presence of excess oxygen.Learn more at: https://brainly.com/question/21085277?referrer=searchResults
Ocean water Choose one: A. is less dense than freshwater. B. salinity decreases as seawater evaporates. C. contains dissolved salts, like halite and gypsum. D. has an average salinity of 35%.
Answer: the answer is C
Explanation:
Ocean water contains dissolved salts, like halite and gypsum. The correct option is C.
What is the ocean?The ocean is the salty water that covers an area of 70.08% of the total surface. It is a large body of water that covers the entire earth. There are seven oceans present with different names, and they are connected with each other. The ocean is one of the traveling routes for traveling and exporting and import of products.
The average salinity of the ocean is 3.5%. It contains salts, halite, and gypsum-like minerals and substances.
Thus, the correct option is C. contains dissolved salts, like halite and gypsum.
Learn more about the ocean, it, here:
https://brainly.com/question/11803537
#SPJ2
Consider the unbalanced chemical equation:
H2SO4 (aq) + Fe(OH)3 (S) → Fe2(SO4)3 (S) + H2O (L)
A volume of 38.0 mL of aqueous H2SO4 solution was required to
react completely with 0.685 g Fe(OH)3 (molar mass = 106.8 g/mol)
to produce Fe2(SO4)3. Calculate the molar concentration of the
H2SO4 solution.
A) 0.253 M
B) 0.344 M
C) 0.214 M
D) 0.301 M
E) 0.175 M
The answer is A. The explanation is in the image.
On the top of the image where it just says equation:, that is part of the sentence "First we need to balance the equation:"
WILL MARK BRAINLIEST IF YOU ANSWER EVERY QUESTION!!!!
Answer:
The answer for number one is .A
The answer for number two is heat rises
Explanation:
8) Structures that regulate which molecules,
nutrients, and substances enter the cell are
A) Genes
B) Endoplasmic Reticulum
C) Cell Membranes
D) Centrioles
Which statement about petroleum fractions is correct?
A. All petroleum fractions are used as fuels.
B. Gas oil is used to make bottled gas for heating.
C. Hydrocarbons in diesel have higher boiling points than hydrocarbons in
gasoline.
D. Molecules in kerosene are larger than molecules in fuel oil.
Answer: It is either C. or D.
Explanation: I did some reading about it and it talks about fuel but I know that it didn’t say all of them are used as fuels. maybe I’m wrong
Petroleum is composed of hydrocarbons of various chain length. Different products can be extracted from petroleum but all products cannot be used as fuel.
Hydrocarbons in diesel have higher boiling point than that of gasoline.
What is petroleum?Petroleum is a naturally occurring crude liquid mixture of hydrocarbons. Petroleum can be fractionated to different components such as gasoline, kerosene, diesel etc.
Each fraction vary in the number of carbons and hydrogens in it or called the difference in chain length. Kerosene contains 8-16 carbons where as gasoline and diesel have more carbons.
Not all products of petroleum fractionation can be used as fuel. Some of them with effective quality is taken as fuels.
The boiling point of hydrocarbons in diesel is greater (about 130-380 degree Celsius) than the hydrocarbons in gasoline which is having boiling point in he range 30-225 degree Celsius.
Therefore, the statement C is correct.
To learn more about petroleum, find the link below:
https://brainly.com/question/4147953
#SPJ5
How many carbon (C) atoms are in C3Hg? A. 8 B. 5 C. 1 D. 3
Answer:
the answer is D
Argon (Ar): [Ne]3s23p6 core electrons valence electrons
Answer:
1. The core electrons are 10
2. The valence electrons are 8
Explaination:
Core electrons are electrons located in the inner shells of and atom.
Valence electrons are electrons located on the outermost shell of an atom
From the question given above, we obtained:
Ar (18) => [Ne] 3s²3p⁶
Recall
Ne (10) => 1s² 2s²2p⁶
Therefore,
Ar (18) => [1s² 2s²2p⁶] 3s²3p⁶
From the above illustration,
Inner shell (core shell) => 1s² 2s²2p⁶
Outermost shell (valence shell) => 3s²3p⁶
1. Determination of the core electrons
Inner shell (core shell) => 1s² 2s²2p⁶
Core electrons = 2 + 2 + 6
Core electrons = 10
2. Determination of the valence electrons
Outermost shell (valence shell) => 3s²3p⁶
Valence electron = 2 + 6
Valence electron = 8
Answer:
10 core electrons
8 valence electrons
Explanation:
What gas was produced by the reaction of zinc and HCl? How did this gas behave in the presence of fire?
Answer:
The gas that was produced by the reaction of zinc and hydrochloric acid was Hydrogen gas and zinc chloride. In the presence of fire, hydrogen explodes with a popping sound. The popping sound put out the flame.
When Zn is reacts with HCl then generating tiny hydrogen bubbles as well as creating zinc chloride [tex]ZnCl_{2}[/tex] (zinc chloride).
What is hydrogen bubbles?A process known as the hydrogen bubble procedure electrolyzes conductive water containing acid / base to produce hydrogen bubbles.
What is [tex]ZnCl_{2}[/tex] (zinc chloride)[tex]ZnCl_{2}[/tex] (zinc chloride) will be formed by the reaction between the Zn (Zinc) and Cl (chlorine).
It can be written as:
[tex]Zn +Cl_{2}[/tex] → [tex]ZnCl_{2} +H_{2}[/tex].
Hence, [tex]ZnCl_{2}[/tex] (zinc chloride) and hydrogen gas will be formed during the reaction.
To know more about hydrogen bubbles.
https://brainly.com/question/12708099
#SPJ3
what are aliphatic alcohols and what differentes it from other alcohols
Answer: Lipids are one of the important nutrients needed by the body to supply energy and essential fatty acids required by the organism. Solid alcohols are a class of steroids, which are steroids containing hydroxyl groups. Lipids is a general term for oils, fats and lipids. 2, the characteristics are different: fat consists of c, h, o three elements. Fats are triacylglycerides made up of glycerol and fatty acids.
8) What mass of chlorine reacts with 20.0 g of iron to form iron(III) chloride?
Answer:
38.3 g
Explanation:
8) What mass of chlorine reacts with 20.0 g of iron to form iron(III) chloride?
first write, then balance the equation
Fe + Cl2-------------> FeCl3
2Fe + 3Cl2----------> 2FeCl3
2 moles of Fe require 3 moles of Cl2
the atomic mass of Fe is 56
20/56= 0.36 moles of Fe
this requires o.36 X 3/2 = 0.54 moles of Cl2
Cl2 has a molar mass of 35.5 X 2=71
1 mole of Cl2 is 71g
0.54 moles is 0.54 X 71 g= 38.3 g
The mass of chlorine reacts with 20.0 g of iron to form iron(III) chloride is 38.3 g.
What is mass?Mass is defined as a numerical representation of the fundamental characteristic of all matter, inertia.
It can also be defined as a dimensionless number used to describe the mass of a particle or item.
[tex]\rm 2Fe + 3Cl_2\rightarrow2FeCl_3[/tex]
As per the reaction 3 mole of chlorine is required for 2 mole of fluorine.
Atomic mass of fluorine = 56
Moles of Fe = 20 / 56
= 0.36 moles
This require 0.36 x 3/2 = 0.54 moles of Cl₂
Molar mass of Cl = 35.5
So for Cl₂ = 2 x 35.5 = 71 moles
For 1 mole of Cl₂ = 71 moles is needed
So, for 0.54 moles = 71 x 0.54
= 38.3 g
Thus, the mass of chlorine reacts with 20.0 g of iron to form iron(III) chloride is 38.3 g.
To learn more about mass, refer to the link below:
https://brainly.com/question/19694949
#SPJ2
which of the following statements is true?
just look at the picture
c
Explanation:
compounds are combine from two or more elements
Hypothesis of 6. You decide to clean your bedroom. You notice that your floor is covered with clothes.
You try to get rid of the clothes by throwing them into the air. You throw clothes
from 1/3 of the room into the closet and a second 1/3 of the room straight up in
the air. In the last 1/3 of the room, you leave the clothes on the floor. After 30
minutes of “cleaning,” the floor of the room is now visible.
IV: Where clothes are thrown
DV: visible floor
Hypothesis????
Answer: So you could for example say, “IF I through my clothes into the closet. THEN the floor will be visible” I capatlized if and then because you need them in a hypothesis.
Explanation: