Answer:
Super critical
1.2 m
Explanation:
Q = Flow rate = [tex]12\ \text{m}^3/\text{s}[/tex]
w = Width = 3 m
d = Depth = 90 cm = 0.9 m
A = Area = wd
v = Velocity
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
[tex]Q=Av\\\Rightarrow v=\dfrac{Q}{wd}\\\Rightarrow v=\dfrac{12}{3\times 0.9}\\\Rightarrow v=4.44\ \text{m/s}[/tex]
Froude number is given by
[tex]Fr=\dfrac{v}{\sqrt{gd}}\\\Rightarrow Fr=\dfrac{4.44}{\sqrt{9.81\times 0.9}}\\\Rightarrow F_r=1.5[/tex]
Since [tex]F_r>1[/tex] the flow is super critical.
Flow is critical when [tex]Fr=1[/tex]
Depth is given by
[tex]d=(\dfrac{Q^2}{gw^2})^{\dfrac{1}{3}}\\\Rightarrow d=(\dfrac{12^2}{9.81\times 3^2})^{\dfrac{1}{3}}\\\Rightarrow d=1.2\ \text{m}[/tex]
The depth of the channel will be 1.2 m for critical flow.
For proper function hydraulics systems need a reservoir of which of the following?
A.) Compressible fluid
B.) Non-compressible fluid C.) Non-compressible air
draw afd,sfd and bmd of frame
Answer:
uh, i dont understand?
Explanation:
Calculate the Lee for the same wing if we increase the span to 0.245 m. By increasing the span we also increase the glider weight to 0.0523
Answer:
0.21
Explanation:
This would have been a fairly easy one, except for that the first part of the question is missing, and as such, I'd assume a value.
We need to use chord, so, I'm assuming the length of the chord to be 0.045 m
The Area is given by the formula
Area = span * chord
Area = 0.245 * 0.045
Area = 0.011 m²
This area gotten, is what we then divide the glider weight by to get our answer.
Lee = area / weight
Lee = 0.011 / 0.0523
Lee = 0.21
Therefore, using the values of the chord I'd assumed, the Lee of the same wing is 0.21
Answer: 0.2108
Explanation:got it correct
How would you expect an increase in the austenite grain size to affect the hardenability of a steel alloy? Why?
Answer:
The hardenability increases with increasing austenite grain size, because the grain boundary area is decreasing. This means that the sites for the nucleation of ferrite and pearlite are being reduced in number, with the result that these transformations are slowed down, and the hardenability is therefore increased.
You are the project manager assigned to construct a new 10-story office building. You are trying to estimate the costs for this project. You start by assigning the costs associated with each of the project activity. Then you sum up all the individual costs into a final cost estimate. Which type of cost estimation technique did you use?
Answer:
Bottom-up Estimation
Explanation:
Bottom-up estimation is a type of project cost estimation that considers the cost of individual project activities and finally sums them up or finds the aggregates. The summation gives an idea of what the entire project will cost.
This is an effective way of estimating the cost of a project as it evaluates the costs on a wholistic basis. It also considers the tiniest details during the estimation process. The process moves from the simpler details to the more complicated details.
A production line manufactures 10-liter gasoline cans with a volume tolerance of up to 5%. The probability that any one is out of tolerance is 0.03. If five cans are selected at random. a) What is the probability that they are all out of tolerance? b) What is the probability that exactly two are out of tolerance?
Answer:
In the case of the production Line, we know that,
No of gasoline cans = 5
probability that 1st can is out of tolerance = 0.03
probability that 2nd can is out of tolerance = 0.03
.
.
probability that the 5th can is out of tolerance = 0.03
Therefore,
probability of 1st can out of tolerance + probability of 1st can not out of tolerance = 1
Probability of 1st can not out of tolerance = 1 -- 0.03 = 0.97
probability of 2nd can not out of tolerance = 0.97
.
.
probability of 5th can not out of tolerance = 0.97
Question A:
Probability that they are all out of tolerance
= P(1st can out of tolerance) * P(2nd can out of tolerance) * P(3rd can out of tolerance) * P(4th can out of tolerance) * P(5th can out of tolerance)
= (0.03 ) * (0.03) * (0.03) * (0.03) * (0.03) = 2.43 E⁻⁸ (2.43 ˣ 10⁻⁸)
Question B:
Probability that exactly two are out of tolerance
= P(1st can is out of tolerance) * P(2nd can is out of tolerance) * P(3rd can is not out of tolerance) * P(4th can is not out of tolerance) * P(5th can is not out of tolerance)
= (0.03) * (0.03) * (0.97) * (0.97) * (0.97) = 0.0008214057
Explanation:
(3 points) One end of a 48 cm long copper rod with a diameter of 2.0 cm is kept at 360 ° C, and the other is immersed in water at 32° C. Calculate the heat conduction rate along the rod. The thermal conductivity for copper is 386 MK
Answer:
hi tommoro i have phisics exam i needd help only for 20 min how wants to help messege me instgram meeraalk99
Explanation:
please
A 13.7g sample of a compound exerts a pressure of 2.01atm in a 0.750L flask at 399K. What is the molar mass of the compound?a. 318 g/mol
b. 204 g/mol
c. 175 g/mol
d. 298 g/mol
Answer: Option D) 298 g/mol is the correct answer
Explanation:
Given that;
Mass of sample m = 13.7 g
pressure P = 2.01 atm
Volume V = 0.750 L
Temperature T = 399 K
Now taking a look at the ideal gas equation
PV = nRT
we solve for n
n = PV/RT
now we substitute
n = (2.01 atm x 0.750 L) / (0.0821 L-atm/mol-K x 399 K )
= 1.5075 / 32.7579
= 0.04601 mol
we know that
molar mass of the compound = mass / moles
so
Molar Mass = 13.7 g / 0.04601 mol
= 297.7 g/mol ≈ 298 g/mol
Therefore Option D) 298 g/mol is the correct answer
If ice homogeneously nucleates at -44.6°C, calculate the critical radius given values of -3.1 × 10^8 J/m3 and 25 × 10^-3 J/m^2, respectively, for the latent heat of fusion and the surface free energy.
Answer:the critical radius for the homogeneous nucleating ice is 0.986 nm
Explanation:
Using the formulae below to calculate the critical radius for homogeneous nucleation,
We Have that
Critical radius ( r *) = [2γ Tm/ΔHf]{ 1/ Tm- T]
where γ = surface free energy =25 × 10^-3 J/m^2
Tm= solidification temperature at equilibrium =273K
Hf= latent heat of fusion = -3.1 × 10^8 J/m3
Temperature , T = -44.6°C
Critical radius ( r *) = (2 X 25 × 10^-3 J/m^2 x 273)/ (-3.1 × 10^8 J/m3 ) X ( 1/ 273 - ( -44.6 +273)
4.40x 10^-8X ( 1/273-228.4)
4.40x 10^-8 X 1/44.6
4.40x 10^-8 x 0.0224
9.86x 10 ^-10m =0.986 x 10 ^-9m = 0.986nm
The pressure at the bottom of an 18 ft deep storage tank for gasoline is how much greater than at the top? Express your answer in the units of psi.
The pressure at the bottom of an 18 ft deep storage tank for gasoline is 5.625 psi.
What is pressure?Pressure is defined as the force exerted on a surface's unit area. The mass of the air molecules above is what exerts pressure on the atmosphere. The enormous quantities of air molecules that make up the layers of our atmosphere collectively have a tremendous amount of weight, which bears down on whatever is below.
The storage tank's top pressure is 14.7 psi, or p atm, or 2116.8 lb/ft3.
Gasoline has a density of 45 lb/ft3.
Tank depth, h = 18 foot
The storage tank's bottom pressure is 2926.8 pounds per square foot (Pb = 2116.8 + 45 x 18).
As a result, the pressure difference between the tank's bottom and top is as follows: P = Pb - P atm = 20.325 - 14.7 = 5.625 psi
Thus, the pressure at the bottom of an 18 ft deep storage tank for gasoline is 5.625 psi
To learn more about pressure, refer to the link below:
https://brainly.com/question/12971272
#SPJ2
It is important to keeo a copy of your written plan and safety record s off-site. True or false
Answer:
The answer for the question is true
Explanation:
If you get a virus or get hacked you will still have it saved
Air enters an adiabatic turbine at 900 K and 1000 kPa. The air exits at 400 K and 100 kPa with a velocity of 30 m/s. Kinetic and potential energy changes are negligible. If the power delivered by the turbine is 1000 kW.
Required:
a. Find the mass flow rate.
b. Find the diameter of the duct at the exit.
hooooooooooooooooooooooooooooooooooooooooooooooooooooooe
A laboratory furnace wall is constructed of 0.2 m thick fireclay brick having a thermal conductivity of 1.82 W/m-K. The wall is covered on the outer surface with insulation of thermal conductivity of 0.095 W/m-K. The furnace inner brick surface is at 950 K and the outer surface of the insulation material is at 300 K. The maximum allowable heat transfer rate through the wall of the furnace is 830 W/m^2. Determine how thick in cm the insulation material must be.
Answer:
The appropriate solution will be "6.4 cm".
Explanation:
The given values are:
Length,
l = 0.2 m
Thermal conductivity,
K₁ = 1.82 W/m-K
K₂ = 0.095 W/m-K
Temperature,
T = 950 K
T = 300 K
Heat transfer rate,
Q = 830 W/m²
Now,
⇒ [tex]Q = \frac{\Delta T}{\frac{L_1}{K_1 A} +\frac{L_2}{K_2 A} }=\frac{A \Delta T}{\frac{L_1}{K_1 } +\frac{L_2}{K_2 } }[/tex]
⇒ [tex]\frac{Q}{A} =\frac{\Delta T}{\frac{L_1}{K_1} +\frac{L_2}{K_2} }[/tex]
On substituting the above given values in the equation, we get
⇒ [tex]830=\frac{(980-300)}{\frac{0.2}{1.82} +\frac{x}{0.095} }[/tex]
On applying cross-multiplication, we get
⇒ [tex]\frac{0.2}{1.82} +\frac{x}{0.095} =\frac{950-300}{830}[/tex]
⇒ [tex]\frac{0.2}{1.82} +\frac{x}{0.095} =\frac{650}{830}[/tex]
⇒ [tex]x =0.639 \ m[/tex]
⇒ [tex]x=6.345 \ i.e., 6.4 \ m[/tex]
what substance does light travel through before putting water in the cup
For a 3-Phase, Wye connected system the Line to Line Voltage measures 12,470 Volts, the Phase current measures 120 Amps.
Required:
a. What will the Line-to-Neutral/Phase voltage be?
b. What will the Line current be?
Answer:
A. 7199.55 volts
B. 120A
Explanation:
In this question we have the
line voltage = VLL = 12470volts
Phase current = Iph = 120 amps
A.)
We are to calculate the line-to-neutral/phase voltage here
VLL = √3VL-N
VL-N = VLL/√3
VL-N = 12470/√3
This gives a line to neutral phase/voltage of 7199.55 volts.
B.
We are to calculate the line current here:
In this connection, the line current and the phase current are equal
ILL = Iph = 120A
Calculate the LER for the rectangular wing from the previous question if the weight of the glider is 0.0500 Newton’s.
Answer:
0.2
Explanation:
Since the span and chord of the rectangular wing is missing, due to it being from the other question, permit me to improvise, or assume them. While you go ahead and substitute the ones from your question to it, as it's both basically the same method.
Let the span of the rectangular wing be 0.225 m
Let the chord of the rectangular wing be 0.045 m.
Then, the area of any rectangular chord is
A = chord * span
A = 0.045 * 0.225
A = 0.010 m²
And using the weight of the glider given to us from the question, we can find the LER for the wing.
LER = Area / weight.
LER = 0.010 / 0.05
LER = 0.2.
Therefore, using the values of the rectangular wing I adopted, and the weight of the glider given, we can see that the LER of the glider is 0.2
Please mark brainliest...
Answer: 0.2025
Explanation: I got it correct
Steam enters an adiabatic nozzle at 1 MPa, 250°C, and 30 m/s. At one point in the nozzle the enthalpy dropped 40 kJ/kg from its inlet value. Determine velocity at that point. (A) 31 m/s (B) 110 m/s (C) 250 m/s (D) 280 m/s
Answer:
284.4 m/s
Explanation:
At the inlet of the nozzle P =1 atm.
Temperature T = 250° C
Velocity of the steam at the inlet V_1 = 30 m/s
Change in enthalpy Δh = 40 KJ/kg
let V_2 be the final velocity
then
[tex]V_2 =\sqrt{2\Delta h+V_1^2} \\=\sqrt{2\times40+30^2}\\= 284.4 m/s[/tex]
please what is dif
ference between building technology and building engineering.
Answer:
Building technology is building technology such as coding an app or a website
Building engineering is making computers or cars or phones
Explanation:
Explain the difference between the connection of a cumulative compound and a differential compound motor
Answer:
Explanation:
A motor is a device that directs current in electrical energy form to mechanical energy, which is known as direct current (DC) motors.
DC motors are of three types: (a) The series motor, (b) The shunt motor, and (c) the compound motor. Our main focus here is the Compound motor, which is further sub-divided into:
i) The cumulative compound motors
ii) The differential compound motors
The difference between these two are:
Cumulative compound motors Differential compound motors
In cumulative compound motors, In differential compound motors,
both the series and shunt windings both series and shunt are
are connected in a way that, connected in a way that the
production of fluxes through them production of fluxes via them
assist each other i.e. they aid each always opposes each other i.e.
other in the production of magnetism they oppose each other in the
production of magnetism.
Which of these words was first used during the 1970s economic crisis?
influx
stagflation
deficit
programs
Answer:
stagflation
Explanation:
it was used in the article
A word which was first used during the 1970s economic crisis is stagflation.
The economic crisis of the 1970s.In the 1970s, an energy crisis took place in the United States of America due to the oil embargo that was imposed on it by OPEC. This oil embargo was imposed on the United States of America by the Organization of Petroleum Exporting Countries (OPEC) in 1973 because of its role in the Arab-Israeli War.
Consequently, the economy of the United States of America experienced stagflation in the following ways:
Slow economic growth.Relatively high unemployment.Read more on stagflation here: https://brainly.com/question/25505087
Indicate similarities between a nucleus and a liquid droplet; why small droplets are stable and very big droplets are not?
Answer:
There are several similarities between the nucleus and a liquid droplet.
Explanation:
A droplet of liquid simply is is very small or tiny drop of liquid. It is also considered as a tiny column of liquid that is surrounded by surfaces that have zero shear stress.
A nucleus on the other hand is an assembly between protons and neutrons. The latter is electrically charged whilst the former is positively charged. The number of protons present in an element is very crucial to the qualities of an element.
The main similarities between a nucleus and a liquid droplet are:
1. a nucleus consists of a large amount of neutrons and protons in the same volume as would a liquid which contains large numbers of molecules in the same volume;
2. both the nucleus and the droplet are similar for their homogeneity in electric charge and density;
3. the molecules exert the same amount for forces towards one another as would the nuclear forces in the nucleons.
4. both of them cannot be compressed
5. both molecules and nucleus are can be subject to nuclear fission which simply mean the breaking apart into smaller units (in the case of the nucleus) or the breaking apart into smaller droplets in the case of the liquid molecule.
6. There are two types of phenomena which occurs in both the liquid droplet and the nucleus which are similar to one another. They are:
Evaporation (in the case of the liquid molecule) and reaction emission (in the case of the nucleus). In evaporation, particles are lost, in Atomic transmutation, particles are lost as well.
B) the forces which determine the stability of droplets are surface tension and gravitation. The smaller the area, the stronger the surface tension available to keep the drops from going out of shape.
Cheers
Series aiding is a term sometimes used to describe voltage sources of the same polarity in series. If a 5 V and a 9 V source are connected in this manner, what is the total voltage?
Answer:Total Voltage = 14V
Explanation: it is possible that a circuit can contain more than one source of electromotive force which can cause flow of current in the same or opposite direction . When the connection to voltage sources allows for current from the voltage sources to flow in same direction,it is termed Series aiding Thus, the Total/effective voltage in a series aiding circuit is computed as the sum of series aiding voltages .
Here we have the series aiding voltages to be 5V and 9V ,
therefore,
Total Voltage = 5V + 9V
= 14V
A 8-core machine has 4 times the performance of a single-core machine of the same frequency. Performance is proportional to frequency. Voltage decreases proportionally to frequency. To achieve the same performance, how much (in percentage) dynamic power would the 8-core system save?
Answer: The 8-core machine saves 87.5% of the dynamic power.
Explanation:
Let Fold = f , Vold = V , Cold = Capacitance
so
Old Dynamic power = Cold × (Vold × Vold) × f
therefore for the 8-core machine
Fnew / Fold = 1/4
Fnew = Fold/4
we were told that Voltage decreases proportional to frequency,
so
Vnew / Vold = 1/4
Vnew = V / 4
So New Capacitance will be;
Cnew = Cold
Thus, New Dynamic power = 8 × Cnew × ( Vnew × Vnew ) × Fnew
= 8 × Cold × (Vold × Vold/16) × ( f/4 )
= 8 × ( Cold ) × ( Vold × Vold ) × ( f ) / 64
= (Old Dynamic Power) / 8
therefore
Old Dynamic Power / New Dynamic Power = 8
Thus, Percentage of power saved will be;
Percentage power saved = 100 × ( Old Dynamic Power - New Dynamic Power ) / Old Dynamic Power
= 100 × (8-1) / 8
= 87.5 %
Therefore The 8-core machine saves 87.5% of the dynamic power.
4. The instant the ignition switch is turned to the start position,
A. The starter motor starts to rotate before energizing the starter p
O B. Only the pull-in winding is energized.
C. Only the hold-in winding is energized.
D. Both pull-in and hold-in windings are energized.
Answer:
D. Both pull-in and hold-in windings are energized.
Explanation:
The instant the ignition switch is turned to the start position, "Both pull-in and hold-in windings are energized." This is because the moment the ignition switch is turned to the start position, voltage passes through to the S terminal of the solenoid.
The hold-in winding is attached to the case of the solenoid. Similarly, the pull-in winding is also attached to the starter motor. Thereby, the current will move across both windings by getting energized to generate a strong magnetic field.
In which phase and for what purpose does a construction manager work with various consultants? In the [blank] phase, a construction manager works closely with architects, civil engineers, electrical engineers, and other consultants to prepare a [blank].
Choices for first [blank]
A. design and planning
B. Construction
C. Post construction
Choices for second [blank]
A. draft
B. Sketch
C. Blueprint
Answer:
a and c
Explanation:
If the specific surface energy for soda–lime glass is 0.30 J/m2 and its modulus of elasticity is (69 GPa), compute the critical stress required for the propagation of an internal crack of length 0.8 mm.
Answer: the critical stress for the sodalime glass = 5.7MPa
Explanation:
Ist Step
we Calculate half length of internal crack as
2a =0.8 mm
a = 0.8/2 = 0.4 mm
Changing to meters becomes = 0.4 / 1000 =0.0004m
2nd Step
Now the critical stress required for the propagation of the internal crack can be calculated using the formulae
Critical Stress (σc) = (2 E γs/ πa) 1/2
where E= modulus of elasticity
γs= specific surface energy for soda–lime glass
a= Length
= (2 x 69 x 10 ^9 x 0.30/ π x 0.0004)1/2
=[tex]\sqrt{ 32,940,802,036,919}[/tex]
= 5,739,407.8= 5.7 x 10^6 N/m^2
= 5.7MPa
the reaction of 4A+3B→2C+D is studied. Unknown masses of the reactants were mixed . After a reaction time of 1 hour the analysis of the mixture showed 2 kmol, 1 kmol of B and 4 kmol of C. product D was present in the mixture but could not be analysed. what is the mole fraction of D in the mixture?
Answer: the mole fraction of D in the mixture is 0.2222
Explanation:
Given that;
mixture analysis shows 2 kmol A, 1 kmol B, 4 kmol C and some unknown kmol of D was present.
4A+3B→2C+D
As from reaction stoichiometry, for every 2 kmol of C produced, kmol of D produced = 1 kmol
so, for 4 kmol C, kmol of D produced = 4/2 × 1 kmol = 2 kmol
Now our mixture has 2 kmol A, 1 kmol B, 4 kmol C and also 2 kmol of D
so, total moles in mixture, we have (2 + 1 + 4 + 2) kmol = 9 kmol
mole fraction of D in mixture will be;
( Kmol of D) / (total moles in mixture) = 2 / 9 = 0.2222
Therefore the mole fraction of D in the mixture is 0.2222
A magnesium–lead alloy of mass 7.5 kg consists of a solid α phase that has a composition just slightly below the solubility limit at 300°C.
(a) What mass of lead is in the alloy?
(b) If the alloy is heated to 400°C, how much more lead may be dissolved in the αα phase without exceeding the solubility limit of this phase?
Answer:
(a)This portion of the problem asks that we calculate, for a Pb-Mg alloy, the mass of lead in 7.5 kg of thesolidphase at 300C just below the solubility limit.From Figure 9.20, the solubility limit for thephase at
Explanation:
Laminar flow normally persists on a smooth flat plate until a critical Reynolds number value is reached. However, the flow can be tripped to a turbulent state by adding roughness to the leading edge of the plate. For a particular situation, experimental results show that the local heat transfer coefficients for laminar and turbulent conditions are
h_lam(x)= 1.74 W/m^1.5. Kx^-0.5
h_turb(x)= 3.98 W/m^1.8 Kx^-0.2
Calculate the average heat transfer coefficients for laminar and turbulent conditions for plates of length L = 0.1 m and 1 m.
Answer:
At L = 0.1 m
h⁻_lam = 11.004K W/m^1.5
h⁻_turb = 7.8848K W/m^1.8
At L = 1 m
h⁻_lam = 3.48K W/m^1.5
h⁻_turb = 4.975K W/m^1.8
Explanation:
Given that;
h_lam(x)= 1.74 W/m^1.5. Kx^-0.5
h_turb(x)= 3.98 W/m^1.8 Kx^-0.2
conditions for plates of length L = 0.1 m and 1 m
Now
Average heat transfer coefficient is expressed as;
h⁻ = 1/L ₀∫^L hxdx
so for Laminar flow
h_lam(x)= 1.74 . Kx^-0.5 W/m^1.5
from the expression
h⁻_lam = 1/L ₀∫^L 1.74 . Kx^-0.5 dx
= 1.74k / L { [x^(-0.5+1)] / [-0.5 + 1 ]}₀^L
= 1.74k/L = [ (x^0.5)/0.5)]⁰^L
= 1.74K × L^0.5 / L × 0.5
h⁻_lam= 3.48KL^-0.5
For turbulent flow
h_turb(x)= 3.98. Kx^-0.2 W/m^1.8
form the expression
1/L ₀∫^L 3.98 . Kx^-0.2 dx
= 3.98k / L { [x^(-0.2+1)] / [-0.2 + 1 ]}₀^L
= (3.98K/L) × (L^0.8 / 0.8)
h⁻_turb = 4.975KL^-0.2
Now at L = 0.1 m
h⁻_lam = 3.48KL^-0.5 = 3.48K(0.1)^-0.5 W/m^1.5
h⁻_lam = 11.004K W/m^1.5
h⁻_turb = 4.975KL^-0.2 = 4.975K(0.1)^-0.2
h⁻_turb = 7.8848K W/m^1.8
At L = 1 m
h⁻_lam = 3.48KL^-0.5 = 3.48K(1)^-0.5 W/m^1.5
h⁻_lam = 3.48K W/m^1.5
h⁻_turb = 4.975KL^-0.2 = 4.975K(1)^-0.2
h⁻_turb = 4.975K W/m^1.8
Therefore
At L = 0.1 m
h⁻_lam = 11.004K W/m^1.5
h⁻_turb = 7.8848K W/m^1.8
At L = 1 m
h⁻_lam = 3.48K W/m^1.5
h⁻_turb = 4.975K W/m^1.8
Solar energy stored in large bodies of water, called solar ponds, is being used to generate electricity. If such a solar power plant has an efficiency of 4.5 percent and a net power output of 150 kW, determine the average value of the required solar energy collection rate, in Btu/h.
Answer: 1.137*10^7 Btu/h.
Explanation:
Given data:
Efficiency of the plant = 4.5percent
Net power output of the plant = 150kw
Solution:
The required collection rate
QH = W/n
= 150/0.045 * 0.94782/ 1 /60 */60 Btu/h.
= 3333.333 *3412.152Btu/h.
= 11373840 Btu/h
= 1.137*10^7 Btu/h.