A student determines the density of an unknown liquid by weighing a sample of known volume. The reported density is found by the instructor to be significantly higher than it should be. Which of the following experimental errors could account for this result?
A. The pipet used was filled to a level above the calibration mark.
B. The balance was read incorrectly, and the recorded sample mass was lower than the true sample mass.
or
C. A part of the sample was spilled from the beaker before it was weighed.

Answer:

migratory distribution

Explanation: The pattern of migratory distribution of species may require collaboration between different countries for effective preservation. This is because species migration can make them enter different territories, which will need to provide an effective level of preservation for species survival

Answer:

hydrogen, carbon, oxygen and nitrogen

Explanation:

Most organic compounds are made up of the four elements: hydrogen, carbon, oxygen and nitrogen.

Most organic compounds are made of just four elements are  hydrogen, carbon, oxygen and nitrogen.

The term organic compound is defined as a substance that contains covalently - bonded carbon and hydrogen and often with other elements.

Benzoic acid, aromatic compounds, benzoic aldehyde, propanoic acid, butanoic acid, malonic acid, amines, heterocyclic compounds, VOC, benzoic acid, and diethyl malonate are some examples of organic compounds.

Carbohydrates, lipids, proteins, and nucleotides are all organic compounds that are required for human function. Because they contain both carbon and hydrogen, these compounds are classified as organic.

Thus, Most organic compounds are made of just four elements are  hydrogen, carbon, oxygen and nitrogen.

To learn more about the organic compound, follow the link;

https://brainly.com/question/5994723

#SPJ2

Answer:

8fw+26gw

i think this is it

Answer:

true mark me brainlist

Explanation:

Explanation:

Speed = Frequency * Wavelength

= 8Hz * 5.78nm

= (8 * 5.78 * 10^-9)m/s

= (4.624 * 10^-8)m/s or 46.24nm/s.

Mass (in g) of the excess reactant (P₄) left = 7.626 g

Given

Reaction

P4(s)+6Cl2(g)→4PCl3(l)

45.57 g P4 and 130.2 g Cl2

Required

mass (in g) of the excess reactant left

Solution

mol P₄ (MW=124 g/mol) :

45.57 : 124 = 0.3675

mol Cl₂(MW=71 g/mol) :

130.2 : 71 = 1.834

mol : coefficient of reactant : P₄ : Cl₂ :

= 0.3675/1 : 1.834/6

= 0.3675 : 0.306

Cl₂ as limiting reactant(smaller ratio)

Reacted mol of P₄ (as an excess reactant):

=1/6 x 1.834

= 0.306

Unreacted mol of P₄ :

= 0.3675 - 0.306

= 0.0615

Mass of P₄(left) :

= 0.0615 x 124

= 7.626 g

Answer:

d. Urea nitrate

Explanation:

Urea nitrate is a fertilizer-based explosive that is produced in one step by reaction of urea with nitric acid. The is an exothermic reaction, therefore, necessary steps and precautions must be taken to ensure safety during the process. The equation of the reaction is given below:

(NH₂)₂CO (aq) + HNO₃ (aq) → (NH₂)₂COHNO₃ (s)

It is as easily-made explosive and can also be used as a catalyst in Diels-Alder reactions of aromatic amines.

In the presence of water, urea nitrate readily decomposes to its original components, urea and nitric acid.

On its own, urea  is commonly used as a deicer for sidewalks as it is a noncorrosive de-icing material. However, it is a more costly method of deicing,  compared to other methods and it is best used where water runs off into vegetation than into a water-body or a storm drain because of its high-oxygen demand which could result in its reducing the oxygen level of the water body. It It is readily found in nature (in our urine) and is also  synthesized artificially.  It has a very high nitrogen content, and is most often used as a nitrogen‐based fertilizer.

Answer:

3

Explanation:

Answer:

Introduction

As a diligent student of chemistry, you will likely encounter tons of reactions that occur in aqueous solution (perhaps you are already drowning in them!). When ions are involved in a reaction, the equation for the reaction can be written with various levels of detail. Depending on which part of the reaction you are interested in, you might write a molecular, complete ionic, or net ionic equation.

Definitions of molecular, complete ionic, and net ionic equations

A molecular equation is sometimes simply called a balanced equation. In a molecular equation, any ionic compounds or acids are represented as neutral compounds using their chemical formulas. The state of each substance is indicated in parentheses after the formula. [Huh?]

Let's consider the reaction that occurs between \text{AgNO}_3AgNO

3

​

start text, A, g, N, O, end text, start subscript, 3, end subscript and \text{NaCl}NaClstart text, N, a, C, l, end text. When aqueous solutions of \text{AgNO}_3AgNO

3

​

start text, A, g, N, O, end text, start subscript, 3, end subscript and \text{NaCl}NaClstart text, N, a, C, l, end text are mixed, solid \text{AgCl}AgClstart text, A, g, C, l, end text and aqueous \text{NaNO}_3NaNO

3

​

start text, N, a, N, O, end text, start subscript, 3, end subscript are formed. Using this information, we can write a balanced molecular equation for the reaction:

\text{AgNO}_3(aq) + \text{NaCl}(aq) \rightarrow \text{AgCl}(s) + \text{NaNO}_3(aq)AgNO

3

​

(aq)+NaCl(aq)→AgCl(s)+NaNO

3

​

(aq)start text, A, g, N, O, end text, start subscript, 3, end subscript, left parenthesis, a, q, right parenthesis, plus, start text, N, a, C, l, end text, left parenthesis, a, q, right parenthesis, right arrow, start text, A, g, C, l, end text, left parenthesis, s, right parenthesis, plus, start text, N, a, N, O, end text, start subscript, 3, end subscript, left parenthesis, a, q, right parenthesis

[What kind of reaction is this?]

If we could zoom in on the contents of the reaction beaker, though, we wouldn't find actual molecules of \text{AgNO}_3AgNO

3

​

start text, A, g, N, O, end text, start subscript, 3, end subscript, \text{NaCl}NaClstart text, N, a, C, l, end text, or \text{NaNO}_3NaNO

3

​

start text, N, a, N, O, end text, start subscript, 3, end subscript. Since \text{AgNO}_3AgNO

3

​

start text, A, g, N, O, end text, start subscript, 3, end subscript, \text{NaCl}NaClstart text, N, a, C, l, end text, and \text{NaNO}_3NaNO

3

​

start text, N, a, N, O, end text, start subscript, 3, end subscript are soluble ionic compounds, they dissociate into their constituent ions in water. For example, \text{NaCl}NaClstart text, N, a, C, l, end text dissociates into one ion of \text{Na}^+Na

+

start text, N, a, end text, start superscript, plus, end superscript for every ion of \text{Cl}^-Cl

−

start text, C, l, end text, start superscript, minus, end superscript; these ions are stabilized by ion-dipole interactions with the surrounding water molecules. [I don't get it!]

Image of crystalline sodium chloride next to image of chloride and sodium ions dissociated in water. Each chloride ion is interacting with multiple water molecules through the positive dipole of the water, and each sodium ion is interacting with water molecules through the negative dipole of the water.

Image of crystalline sodium chloride next to image of chloride and sodium ions dissociated in water. Each chloride ion is interacting with multiple water molecules through the positive dipole of the water, and each sodium ion is interacting with water molecules through the negative dipole of the water.

Sodium chloride dissociates into sodium and chloride ions in water, and these ions become solvated by the highly polar water molecules. Image credit: "Salts: Figure 1" by OpenStax Anatomy and Physiology, CC-BY-NC-SA 4.0.

From the molecular formula, we can rewrite the soluble ionic compounds as dissociated ions to get the complete ionic equation:

\text{Ag}^+(aq) + \blueD{{\text{NO}_3}^-(aq)} + \maroonD{\text{Na}^+(aq)} + \text{Cl}^-(aq) \rightarrow \text{AgCl}(s) + \maroonD{\text{Na}^+(aq)} + \blueD{{\text{NO}_3}^- (aq)}Ag

+

(aq)+NO

3

​

−

(aq)+Na

+

(aq)+Cl

−

(aq)→AgCl(s)+Na

+

(aq)+NO

3

​

−

​

−

(aq)

​

+

Na

+

(aq)

​

+Cl

−

(aq)→AgCl(s)+

Na

+

(aq)

​

+

NO

3

​

−

(aq)

​

Answer:

[tex]\Delta T=-146.5K[/tex]

Explanation:

Hello!

In this case, given the Charles' law which allows us to understand the volume-temperature behavior as shown below:

[tex]\frac{T_1}{V_1}=\frac{T_2}{V_2}[/tex]

Thus, given that we need to calculate the final temperature after the compression, we obtain:

[tex]T_2=\frac{V_2T_1}{V_1}=\frac{1.00L*293K}{2.00L}\\\\T_2=146.5K[/tex]

Thus, the temperature change would be:

[tex]\Delta T=T_2-T_1=146.5K-293K\\\\\Delta T=-146.5K[/tex]

Best regards!

Answer:

The groupings of elements in the periodic table reveal various trends, present in groups such as the alkali metals and noble gases, or the lanthanides and actinides. The periodic table can be used to find information on elements or predict the properties of as-of-yet undiscovered elements.

Explanation:

Answer: D

Just took the quiz

Answer:

Its positive charge is attracted to the negative charge of Cl–.

Explanation:

The best description of why NH₄⁺ forms an ionic bond with Cl⁻ is that its positive charge is attracted to the negative charge of Cl⁻.

An ionic bond forms as a result of transfer of electrons. As a result the seemingly metal ion is attracted to the negative non-metal ion.

The electrostatic force of attraction between these ions is the ionic or electrovalent bond.

So, the attraction between these opposite charges will form the ionic bond.

Answer:

B: Its positive charge is attracted to the negative charge of Cl–

Explanation:

right on edge2021

Answer:

1)Pb(NO3)(aq) + MgSO4(aq)------> Mg(NO3)2(aq) + PbSO4(s)

2)Mn(NO3)2(aq) + 2KOH(aq) ----->Mn(OH)2(s) + 2KNO3(aq)

3)Zn(s) + 2H^2+(aq)----->Zn^2+(aq) + H2(g)

4) Cu(s) + 2Ag^+(aq) ---->Cu^2+(aq) + 2Ag(s)

Explanation:

A double replacement reaction is one in which ions exchange partners.

We can see that the ions in the reactants exchanged their partners in the products. Solid lead II sulphate was precipitated.

Reaction 2 is a single replacement reaction. Solid manganese hydroxide is formed.

Reactions 3 and 4 are redox processes as shown in the respective equations.

The original concentration : 800%

Given

Diluted 1/40

Final concentration 20%

Required

The original concentration

Solution

Dilution is the process of adding solvent to get a more dilute solution.

The moles(n) before and after dilution are the same.

Can be formulated :

 n₁ = n₂

M₁.V₁ = M₂.V₂

diluted 1/40(dilution factor)⇒ V₁/V₂=1/40⇒V₂/V₁=40

M₂ = 0.2(20%)

Input the value for M₁ :

M₁=M₂ x (V₂/V₁)

M₁ = 0.2 x 40

M₂ = 8(800%)

=

Answer:

I think the answer is Himalayan Mountain

Explanation:

I'm not sure but I think so

Answer:

Today, the term is most often used to refer to the valley of the East African Rift, the divergent plate boundary which extends from the Afar Triple Junction southward across eastern Africa, and is in the process of splitting the African Plate into two new separate plates.

Explanation:

So it is D

Answer:

B) separation by boiling points

Explanation:

According to the diagram depicted, crude oil is separated into its different units using boiling points.

Answer:

Double replacement:

Explanation:

Chemical equation:

2AsCl  +  3H₂S     →       As₂S₃ + 6HCl

The given reaction is double displacement reaction. In this reaction arsenic trichloride and hydrogen sulfide react and produced arsenic sulfide and hydrogen chloride. In double displacement reaction both anion an cation of reactants are exchanged with each other.

Double replacement:

It is the reaction in which two compound exchange their ions and form new compounds.

General equation:

AB + CD → AD +CB

Pounds of force pressing on a rectangle : F = 173.86 lbs

Given

P at sea level = 14.7 lbs/in²

Area of rectangle : A = 76.3 cm²

Required

Pounds of force

Solution

P = F/A

F= P.A

Conversion :

1 cm² = 0.155 in²

76.3 cm² = 11.827 in²

Input the value :

F = 14.7 lbs/in² x 11.827 in²

F = 173.86 lbs

Answer:

We can find out what animals eat..and how long a food chain could get..?

Explanation:

The solution of manganese ion, Mn2+ is colorless. This way, the reaction involves a colour change from pink to transparent.

There is no option with this information.

So, the best answer is (A)

Answer:

C)pink colour of the Mn+2.

Explanation:

First of all, a titration involving the change from MnO4- to Mn2+ is a redox reaction.

This redox reaction does not need an indicator because the MnO4- has a deep violet colour while Mn2+ has a light pink colour.

Hence, the change from MnO4- to Mn2+ is signaled by the appearance of the light pink colour of Mn2+ at end point.

Answer:

25.2°C

Explanation:

Given parameters:

Energy applied to the water  = 1000J

Mass of water  = 50g

Final temperature  = 30°C

Unknown:

Initial temperature  = ?

Solution:

To solve this problem, we use the expression below:

            H  = m c Ф

H is the energy absorbed

m is the mass

c is the specific heat capacity

Ф is the change in temperature

     1000  = 50 x 4.184 x (30  -  initial temperature )

     1000  = 209.2(30 - initial temperature)

      4.78  = 30 - initial temperature

      4.78  - 30  = - initial temperature

         Initial temperature  = 25.2°C

Answer:

Part 1-B

Part 2-D

Part 3-A

Answer:

1.B

2.D

3.A

Explanation:

.......................

Answer:

1) Our Earth's iron liquid outer core rotating around the solid inner core

Explanation:

The earth's magnetic field or the geomagnetic field is produced as a result of the earth's iron liquid outer core rotating around the solid inner core.

This produces the earth's magnetic field.

Answer:

19.47%

Explanation:

[tex]\frac{1.29}{1.29+5.35}[/tex]

Please recheck, for this answer may not be correct

Answer:

oKaY?!

Explanation: