Answer:
false
Explanation:
did the test this is correct
What is the name of the kind of stretch that involves stretching as far as you can and then holding for 10-30 seconds
Question 2 options:
PNF
ballistic
dynamic
static
Answer:
Static stretching.
Explanation:
It is static stretching because it is a form of stretching which u can do actively for a period of time and you hold position for about 30 to 60 seconds which allow the muscles and connective tissues to lengthen. It is done after work out with out movement in order to loosen up muscles so as to gain flexibility.
what are three effects of using only non-renewable resources? please help
Consider a buggy being pulled by a horse.
Which is correct?
1. The horse can pull the buggy forward only
if the horse weighs more than the buggy.
2. The force on the buggy is as strong as the
force on the horse. The horse is joined to the
Earth by flat hoofs, while the buggy is free to
roll on its round wheels.
3. The horse pulls before the buggy has time
to react so they move forward.
4. The horse pulls forward slightly harder
than the buggy pulls backward on the horse,
so they move forward.
Answer:
Option 2
Explanation:
Answer:B
Explanation:because she started of with no money and now she made her money up
match the letter with the layer
Answer:
Thermosphere A,B
Mesosphere B,C,D
Stratosphere D,E,F
Troposphere G
Hope this helps please give me brainliest!
God bless :)
Find the acceleration if the force is 10 N and the mass is 5 kg.
Explanation:
Hey there!
Given;
F = 10N
Mass = 5kg
Acceleration due to gravity (a)= 9.8m/s^2
We know that;
F = m*a
Put all values and solve for "m".
10 = m*9.8
Simplify it.
[tex]m = \frac{10}{9.8} [/tex]
Therefore, m= 1.0204kg.
Hope it helps...
A long jumper leaves the ground at an angle of 25 degrees with respect to the horizontal with a resultant velocity of 30 ft/s. What was the horizontal velocity of the jumper at takeoff? What was the vertical velocity at takeoff? How high did the COM rise above the point of takeoff?
Answer:
The horizontal component of the velocity is 27.19 ft/s
The vertical component of the velocity at takeoff is 12.68 ft/s
The vertical distance traveled by the jumper is 8.2 ft
Explanation:
Given;
angle of projection or takeoff, θ = 25°
the resultant velocity, v = 30 ft/s
The horizontal component of the velocity is given by;
[tex]v_x = vcos \theta\\\\v_x = 30 * cos(25)\\\\v_x = 27.19 \ ft/s[/tex]
The vertical component of the velocity at takeoff is given by;
[tex]v_y = vsin \theta\\\\v_y = 30 * sin(25)\\\\v_y = 12.68 \ ft/s[/tex]
The vertical distance traveled by the jumper is given by;
[tex]v_y_f^2 = v_y_o^2 +2(-g)h\\\\v_y_f^2 = v_y_o^2 -2gh\\\\0 = 12.68^2 - (2*9.8)h\\\\0 = 160.78 - 19.6h\\\\19.6h = 160.78\\\\h = \frac{160.78}{19.6}\\\\ h = 8.2 \ ft[/tex]
Carlos gets tired of pushing and instead begins to pull with force Fpull at an angle to the horizontal.
The block slides along the rough horizontal surface at a constant speed. A free-body diagram for the
situation is shown below. Blake makes the following claim about the free-body diagram:
Blake: “The velocity of the block is constant, so the net force exerted on the block must be zero.
Thus, the normal force FN equals the weight Fmg, and the force of friction Ff equals the applied
force Fpull.”
What, if anything, is wrong with this statement? If something is
wrong, identify it and explain how to correct it. If this statement is
correct, explain why.
Answer:
The wrong items are;
1) The normal for FN equals the weight Fmg
2) The force of friction, Ff, equals the applied force Fpull
The corrected statements are;
1) The normal force is weight less the vertical component of the applied force Fpull
FN = Fmg - Fpull × sin(θ)
2) The force of friction equals the horizontal component of the applied force Fpull
Ff = Fpull × cos(θ)
Explanation:
The given statement was;
The velocity of the block is constant, so the net force exerted on the block must be zero. Thus, the normal force FN equals the weight Fmg, and the force of friction Ff equals the applied force Fpull
By the equilibrium of forces actin on the system, given that the applied force acts at an angle, θ, with the horizontal, we have;
The normal force is equal to the weight less the vertical component of the applied force;
That is we have, FN = Fmg - Fpull × sin(θ)
The friction force similarly, is equal to the horizontal component of the applied force;
Ff = Fpull × cos(θ)
The wrong items are therefore as follows;
1) The normal for FN equals the weight Fmg
1 i) The normal force is weight less the vertical component of the applied force Fpull
FN = Fmg - Fpull × sin(θ)
2) The force of friction, Ff, equals the applied force Fpull
2 i) The force of friction equals the horizontal component of the applied force Fpull
Ff = Fpull × cos(θ).
Ben has two carts with masses of 0.1 kg and 0.2 kg. He pushes the smaller cart toward the larger cart and they collide. The smaller cart rebounds back in the direction it came from. He measures the force on the smaller cart from the larger cart to be 5 N. What was the magnitude of the acceleration of the smaller cart?
Answer:
The acceleration of the smaller cart is 50 m/s²
Explanation:
The given masses of the carts are 0.1 kg and 0.2 kg
The direction in which the small cart bounces = In the revers to its initial direction
The force exerted by the larger cart on the small cart = 5 N
Therefore, we have;
Force acting on smaller cart = Mass of smaller cart × Acceleration of the smaller cart
∴ The acceleration of the smaller cart = Force acting on smaller cart/(Mass of smaller cart)
The acceleration of the smaller cart = 5 N/(0.1 kg) = 50 m/s²
The acceleration of the smaller cart = 50 m/s².
If I travel at a velocity of 2m/s to the right for 4 seconds, what is my displacement?
Write a brief summary of table tennis or tennis
Answer:
A point is won by a player when the opponent cannot hit the ball with a racket over the net and onto the other side of the table. Each game is won by being the first player to win 11 points, and be at least 2 points ahead of their opponent. The equipment needed to play table tennis would be a table, rackets, and balls. Some of the rules are no hand-on table (even leaning your hands on the table is not allowed!) Also, if the ball hits the net, you have to serve again.
An object is moving east with a constant speed of 30 m/s for 5 seconds. What is the object’s acceleration?
Answer:
6 m/s²
Explanation:
From the question given above, the following data were obtained:
Velocity (v) = 30 m/s
Time (t) = 5 s
Acceleration (a) =..?
Acceleration is defined mathematically as:
Acceleration (a) = Velocity (v) /time (t)
a = v /t
With the above formula, we can obtain the acceleration of the object as follow:
Velocity (v) = 30 m/s
Time (t) = 5 s
Acceleration (a) =..?
a= v/t
a= 30/5
a = 6 m/s²
Therefore, the acceleration of the object is 6 m/s² due East.
Atomic theory describes the motion of particles in solids, liquids, and gases. Which statement best describes the particles in a given state of matter?
A. The particles in gases have a fixed position but can vibrate.
B. The particles in solids have a fixed position but can vibrate.
C. The particles in solids are very close to each other but they are able to move past each other. D. The particles in gases are very close to each other but they are able to move past each other.
Answer:
B. The particles in solids have a fixed position but can vibrate
Explanation:
Answer choice "A" is incorrect because particles in gases are not held by bonds and move freely (not fixed).
Answer choice "C" is incorrect because while solids are close in proximity, their particles do not move past each other.
Answer choice "D" is incorrect because while the particles in gases are able to move past each other, they are not arranged in close proximity. In fact, them being spread out and free is why they are able to move past each other.
You're driving your car at a constant speed in a straight line which of the following can be used to cause your car to experience a centripetal acceleration
A)brake pedal
B) steering wheel
C)gas pedal
D)All of the above
A. 2kg
B. 6kg
C. 8kg
D. 14kg
Answer:
A
Explanation:
We know the force is (16N-12), which is 4N, and we know the acceleration is 2 m/s^2. Meaning, we can solve the formula m = F / a (mass equals force divided by acceleration), and we get 2kg.
What if the height is 85m, then how long long does it stay in the air?
Explanation:
hamburger cheesecake
Mass refers to the gravitational force on the matter in contact with the surface of a planet. true or false
Answer:
False
Explanation:
The mass of something does not depend on gravity. A planet has a constant gravitational force. Earth's is 9,80 N/kg. The moon, on the other hand, is 1,6 N/kg. the number of kilograms of something doesn't change if you go from one planet to another and since mass is measured in kilograms, mass doesn't change, therefore it does not refer to gravity. Mass refers to the quantity of matter in an object. It is weight that refers to the gravitational force on an object, since it is measured in newtons, and the amount of newtons per kilogram changes from planet to planet due to different gravity constants
4. Why do chemists use relative masses of atoms compared to a reference isotope rather than the
actual masses of the atoms?
a. The actual mass of an electron is very large compared to the actual mass of a proton.
b. The actual masses of atoms are very small and difficult to work with.
c. The number of subatomic particles in atoms of different elements varies.
d. The actual masses of protons, electrons, and neutrons are not known.
Answer:
B
Explanation:
Answer:
answer is B
Explanation:
took the test
is isopropyl alcohol a element compound or mixture
Answer:
Isopropyl is an element compound.
Explanation:
When an object is said to be in free fall, the object is actually moving..
write about any five form of energy with example
Answer:
The different types of energy include thermal energy, radiant energy, chemical energy, nuclear energy, electrical energy, motion energy, sound energy, elastic energy and gravitational energy.
Answer:
Chemical energy
Explanation:
Ex. gasoline, chemical batteries, and wood
Answer and I will mark Branliest!!!
3. _____________is a means of creating force leading to movement. *
A. Propulsion
B. Dialysis
C. Magnification
D. Osmosis
Answer:
propulsion
Explanation:
please help
Which equipment is best to hold and to measure liquids?
A). flask and graduated cylinder
B). scale and ruler
C). caliper and thermometer
D). stopwatch and beaker
Answer:
I'm pretty sure that the answer is A
help awnsers need expertsss
Answer:
ok the answer for number 14 is 0.5 0 kilograms to get this answer this is my explanation ok where try that the bottle of water when full has a mass of 1.30 kg and one half of the water is poured away the mass of the bottle and the half of water is 0.90 kilograms so to get the the water that was poured out we will subtract 0.90 kg from 1.30 kilograms to get 0.40 kilograms so this 0.40 kilograms is the half of the water that was poured out meaning the other half is also 0.40 so to get the mass of the bottle we will take mass of the bottle plus the water - mass of the water so it will be 1.30 kilograms - 0.80 kilograms to get 0.50 kilograms.and number 15 I don't know I'm sorry about thatJayden created a cell model using a glass bottle with a cork. He said that the cork could be opened to eliminate waste material that’s generated after digestion in the cell. A number of particles resembling organelles are in the bottle. Which organelle’s function will cause Jayden to open the cork to eliminate waste material?
A. chloroplast
B. cytoplasm
C. nucleus
D. lysosome
E. ribosome
Answer:
D. lysosome
Explanation:
A. chloroplast - the role of the chloroplast is to trap light energy and perform photosynthesis
B. cytoplasm - the cytoplasm is the fluid-filled space inside the cell
C. nucleus - the nucleus houses the genetic material
D. lysosome - This is the correct answer. Lysosomes trap and digest waste products in the cell and break them down into reusable components.
E. ribosome - the ribosomes are protein synthesis machines
What is the weight of a body at a centre of Earth
What disagreement did Sigmund Freud have with both Josef Breuer and Jean Martin Charcot?
A. whether hypnosis was a neurological or psychological phenomenon
B. whether hypnosis should be conducted with pregnant women
C. whether hypnosis had any value as a curative remedy for patients
D. whether hypnosis was an effect of a "hidden observer" or the id
Answer:
The correct answer is 'A'
Explanation:
I guessed and was correct.
Freud backed Bernheim's efforts to establish hypnosis and suggestion as acceptable fields of study for science and to advance them as therapeutic tools. Thus, option A is correct.
What is the neurological or psychological phenomenon?Both neurologists and psychiatrists treat illnesses and ailments that affect the brain and the psyche. However, while psychiatrists focus on psychological issues, neurologists are experts in physiological illnesses.
According to medical terminology, neurological disorders are conditions that impact the spinal cord, brain, and body's nerves.
A variety of symptoms can be caused by structural, metabolic, or electrical abnormalities in the brain, spinal cord, or other nerves.
Therefore, whether hypnosis was a neurological or psychological phenomenon.
Learn more about neurological or psychological here:
https://brainly.com/question/28702031
#SPJ2
That
Vhy do people engage in various
e long answer to the following questions.
Which tradition of our society needs to be reform
and write the ways to reform them
of Nepal
are eggs a element, a compound, or a mixture
Answer:
I'm gonna go with compund
Answer: a mixture because it is made out of some other substances.
Explanation:
Why does sonar use ultrasound rather than sound?
Answer; Ultrasonic waves (sounds having frequency greater than 20,000 Hz) are used in sonar because: ... Ultrasonic waves can penetrate water to long distances (because of their high frequency and very short wavelength), but ordinary sound waves or infrasonic waves cannot penetrate water to such long distances.
Answer:
Ultrasonic waves (sounds having frequency greater than 20,000 Hz) are used in sonar because: ... Ultrasonic waves can penetrate water to long distances (because of their high frequency and very short wavelength), but ordinary sound waves or infrasonic waves cannot penetrate water to such long distances
Explanation:
Match these items.
1. alpha rays
2. plasma
3. fission
4. beta rays
5. gamma rays
6. radioactive
7. fusion
a. splitting/dividing
b. joining together
c. release of atomic particles
d. high-energy light
e. helium nuclei
f. electrons
g. ions and free electrons
Answer:
Alpha Rays - Helium Nuclei
Gamma Rays - High-Energy Light
Fusion - Joining Together
Radioactive - Release of Atomic Particles
Beta Rays - Electrons
Fission - Splitting/Dividing
Plasma - Ions and Free Electrons
Explanation:
The correct match for the given terms:
1. alpha rays -Helium nuclei
2. plasma - ions and free electrons
3. fission - splitting/dividing
4. beta rays - electrons
5. gamma rays - high-energy light
6. radioactive - release of atomic particles
7. fusion - joining together
What is radioactivity?The nucleus of an atom exhibits the phenomenon of Radioactivity due to its instability. Energy will be lost due to the emission of radiation from the unstable nucleus of an atom.
The electrostatic force of repulsion and the powerful forces of attraction keep the nucleus together. The instability increases as the size of the nucleus increases because the mass of the nucleus increases when concentrated. Therefore, Plutonium, Uranium is extremely unstable and undergoes radioactivity.
The emitted radiation from radioactivity always consists of alpha, beta, and gamma particles. Gamma Decay is photons having high energy, Beta Decay consists of Electrons while Alpha Decay consists of a Helium nucleus.
Learn more about radioactive decay, here:
https://brainly.com/question/1770619
#SPJ2