An empty airplane with a mass of 200,000 kg must have a speed of 82 m/s to achieve takeoff. Once it is fully loaded, the airplane has a mass of 350,000 kg. It has 3200 m of runway. a) How much force is needed to get the full airplane safely in the air?
b) How much runway would the empty airplane use if its engines generated the same force?

Answers

Answer 1

Answer:

a) A force of 367718.75 newtons is needed to get the full airplane safely in the air.

b) The empty airplane would need a runway of 1828.571 meters.

Explanation:

a) This problem can be solved by using the Work-Energy Theorem, which states that work needed by the airplane to get minimum speed is equal to its change in translational kinetic energy, both measured in joules. The resulting formula is presented below:

[tex]F\cdot \Delta s = \frac{1}{2}\cdot m \cdot (v_{f}^{2}-v_{o}^{2})[/tex] (1)

Where:

[tex]F[/tex] - Minimum net force, measured in newtons.

[tex]\Delta s[/tex] - Runway length, measured in meters.

[tex]m[/tex] - Mass of the airplane, measured in kilograms.

[tex]v_{o}[/tex], [tex]v_{f}[/tex] - Initial and final speeds of the airplane, measured in meters per second.

If we know that [tex]m = 350000\,kg[/tex], [tex]v_{o} = 0\,\frac{m}{s}[/tex], [tex]v_{f} = 82\,\frac{m}{s}[/tex] and [tex]\Delta s = 3200\,m[/tex], then the minimum net force needed by the airplane to get itself safely in the air:

[tex]F = \frac{m\cdot (v_{f}^{2}-v_{o}^{2})}{2\cdot \Delta s}[/tex]

[tex]F = \frac{(350000\,kg)\cdot \left[\left(82\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right]}{2\cdot (3200\,m)}[/tex]

[tex]F = 367718.75\,N[/tex]

A force of 367718.75 newtons is needed to get the full airplane safely in the air.

b) If we know that [tex]m = 200000\,kg[/tex], [tex]v_{o} = 0\,\frac{m}{s}[/tex], [tex]v_{f} = 82\,\frac{m}{s}[/tex] and [tex]F = 367718.75\,N[/tex], then the length of the runway is:

[tex]\Delta s = \frac{m\cdot (v_{f}^{2}-v_{o}^{2})}{2\cdot F}[/tex]

[tex]\Delta s = \frac{(200000\,kg)\cdot \left[\left(82\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right]}{2\cdot (367718.75\,N)}[/tex]

[tex]\Delta s = 1828.571\,m[/tex]

The empty airplane would need a runway of 1828.571 meters.


Related Questions

Following through when hitting a baseball

Answers

Do we have to answer something ? We’re are the answers choice at?

An object moving at a constant velocity accelerates at a constant rate of 2.5 m/s2 for a distance of 30 m. At the end of the acceleration the object has a velocity of 90 m/s. What was its velocity before accelerating?

Answers

Answer:

The initial velocity is 89.16m/s

Attached is the solution

Explanation:

which wave carries the highest energy?​

Answers

Answer:

Gamma rays

Explanation:

The highest wave of energy is gamma ray.

A 30 kg dog runs at a speed of 15
What is the dog's kinetic energy?

Answers

Ke= 1/2 mv ^ 2
15x 15 = 225
225 x 30 = 6750
6750/2 = 3375 J
Ke = 3375 J

A car starts from rest and accelerates at a constant rate of 3.5 m/s2. What is the car’s velocity after the car has traveled 800 m?

Answers

Answer:

Attached is the answer

Explanation:

The car’s velocity after the car has traveled 800 m is 74.83 m/sec.

What is velocity?

When an item is moving, its velocity is the rate at which its direction is changing as seen from a certain point of view and as measured by a specific unit of time.

Using equation of motion, initial velocity u = 0 and acceleration a = 3.5 unit and distance travelled is 800 m.

v² = u² + 2as

v² = 0 + 2*3.5*800

v² = 5600

v = 74.83 m/sec

The car’s velocity after the car has traveled 800 m is 74.83 m/sec.

To learn more about velocity refer to the link

brainly.com/question/18084516  

#SPJ2

A 5.0\, \text {kg}5.0kg5, point, 0, start text, k, g, end text box is at rest on a table. The static friction coefficient \mu_sμ
s

mu, start subscript, s, end subscript between the box and table is 0.500.500, point, 50, and the kinetic friction coefficient \mu_kμ
k

mu, start subscript, k, end subscript is 0.300.300, point, 30. Then, a 20\,\text N20N20, start text, N, end text horizontal force is applied to the box.
What is the best estimate of the magnitude of the box’s acceleration?

Answers

Answer:

25 N

Explanation:

When a force is applied to an object, for it to move it has to overcome the frictional force. The frictional force is perpendicular to the surface on which it acts. For an object at rest, it is acted upon by static friction, this friction must be overcome before the object can move, while a moving object is resisted by kinetic friction that prevents it from moving.

Since the box is at rest, it is acted upon by a static friction.

mass = 5 kg, acceleration due to gravity = 10 m/s², static friction coefficient = 0.5

Weight of the box = mass * acceleration due to gravity = 5 * 10 = 50 N

The applied horizontal force (F) is:

[tex]F=\mu_s*weight=0.5*50\\\\F=25\ N[/tex]

Answer:

0 m/s^2

Explanation:

khan academy

PLZ PLZ PLZ PLZ PLZ PLZ PLZ HELPPPPPPPPPPPPPPPPP

Answers

C is the answer I think

Answer:

endoplasmic reticulum

dew forms when humid air cools overnight. if the temperature falls below freezing, blank will form instead

Answers

frost

i think this is right bc frozen water is just ice abs dew is water and frozen dew is frost

According to Einstein's famous formula, the relationship between mass and energy can be written E = M ∙ c2, where E = energy in joules, m = mass in kilograms and c = speed of light in meters per second. Sweden's annual energy use amounts to approximately 1.35 ∙ 10 up tp 18J. Suppose that all this energy could be created by converting matter into energy. If so, how much mass would be needed to cover the country's annual energy use?
The speed of light is 3 ∙ 10 up to 8 m / s

Answers

Answer:

the amount of mass needed is:  4.5 10^9 kg

Explanation:

Use the given equation:

E = m * c^2

with E = 1.35 * 10^(18)  J

and c = 3 * 10^8 m/s

and solve for the mass as shown below:

m = 1.35 * 10^(18) / 3 * 10^8 ≈ 4.5 10^9 kg

The following number - 0.050437 - written to TWO significant figures would be

Answers

Answer:

0.050000

Explanation:

your welcome :)

4- Protein foods?? pls answer these i really need these​

Answers

The #1 answer would be meats and eggs. But, as a veggan, I present you with meatless protien-rich food!

1 - Pea protein (used in Beyond Meat, which tastes just like meat btw!)

2 - Soy protein such as tofu

3 - Nuts

4 - Beans! oml so many beans have MORE protien than meat!! ikr!?!?

may I have Brainliest pls =)

A person runs 15.0 km north then turns around and runs 10.0 Km south. what is his dstance

Answers

Answer:

25km

Explanation:

The person runs 15km Northward

 Turns around and runs 10km southward

The distance is the length of path covered by the person running.

This is given as:

 Distance  = Distance North + Distance South

Distance  = 15km + 10km  = 25km

Answer:

25km

Explanation:

cant explain but ik

What part of a motor causes its electromagnet to turn in the same direction
consistently, transforming electrical energy into mechanical energy?
A. Commutator
B. Loop of wire
C. Permanent magnets
D. Battery


PLS HELP

Answers

Answer:

A. Commutator

Explanation:

Commutator is part of a motor causes its electromagnet to turn in the same direction consistently, transforming electrical energy into mechanical energy.

What is energy?

Energy is the ability or capability to do tasks, such as the ability to move an item (of a certain mass) by exerting force. Energy can exist in many different forms, including electrical, mechanical, chemical, thermal, or nuclear, and it can change its form.

A commutator is a rotary electrical switch in certain types of electric motors and electrical generators.

Commutator is part of a motor causes its electromagnet to turn in the same direction consistently, transforming electrical energy into mechanical energy.

To learn more about energy refer to the link:

brainly.com/question/1932868

 #SPJ5

Please help me this is worth allot

Answers

The answer is “a joule”

Microwaves are sent through a material causing the molecules in the material to twist and vibrate, causing the material to heat up. What is this twisting and vibration of the molecules creating heat an example of?(1 point)

a macroscopic change creating a macroscopic output

a microscopic change creating a macroscopic output

a macroscopic change creating a microscopic output

a microscopic change creating a microscopic output

Answers

Answer: The answer is C

Explanation:

A force is exerted on a box an an equal and opposite force is exerted by the box. what explains this?

Answers

Answer: What is the force that opposes motion between two surfaces in contact with each ... How is the relationship among mass, force and acceleration explained? ... When a force is exerted on a box, an equal and opposite force is exerted by the box.


What distance is required for a train
to stop if its intial Velocity is 23 m/s
and its deceleration is 0.25m/s (Assume the train decelerates at a constant rate.)​

Answers

Explanation:

what is time in this question

a b c or d for not heat

Answers

Answer:

a

Explanation:

The awnser would be a

If the base runner leaves the base before the ball is caught in the outfield, what should the defence do?

Answers

Answer:

Well it depends

Explanation:

If the runner leaves the base before

the ball is caught the defence cannot do anything exept  

catch the  ball if they catch the ball while he is still running he has to get back to the base before they could tag him or the base if they tag him or the base before he can get back to his base he is out if they did not  catch the ball the runner can run as long as he wants just cant get taged the defence has to get the ball in as fast as possible to get the runner out.

A cell of e.m.f 1.5 v and internal resistance 2.5 ohm is connected in series with an ammeter of resistance 0.5 ohm and a resistor of resistance 7.0 ohm. Calculate the current in the circuit.

Answers

Answer:

The current in the circuit is 0.15 Ampere

Explanation:

The given parameters of the cell are;

The electromotive force (e.m.f.) of the cell, E = 1.5 V

The resistance of the cell, r = 2.5 ohm

The resistance of the ammeter = 0.5 ohm

The resistance of the resistor = 7.0 ohm

The formula for the e.m.f., E of a cell is given as follows;

e.m.f. E = I·(R + r)

Where;

I = The current in the circuit

R = The sum of the resistances in the circuit = 7.0 Ω + 0.5 Ω + 2.5 Ω = 10 Ω

Therefore, we have;

[tex]The \ current \ in \ the \ circuit, \ I = \dfrac{E}{R + r}[/tex]

Substituting the known values, gives;

[tex]I = \dfrac{1.5 \ V}{7 \ \Omega + 0.5 \ \Omega + 2.5 \ \Omega} = \dfrac{1.5 \ V}{10 \ \Omega} = 0.15 \ A[/tex]

The current in the circuit, I = 0.15 Ampere.

How many protons will every atom of Carbon (C) have?
14
12
13
6

Answers

Answer:

6 protons

Explanation:

The answer should be 6 every atom will have 6

Someone pls help me with this!

Answers

Answer:

F=8.87 N

Explanation:

Coulomb's Law

The electrostatic force between two charged objects is directly proportional to the product of their charges and inversely proportional to the square of the distance between the two objects.

Written as a formula:

[tex]\displaystyle F=k\frac{q_1q_2}{d^2}[/tex]

Where:

[tex]k=9\cdot 10^9\ N.m^2/c^2[/tex]

q1, q2 = the objects' charge in coulomb

d= The distance between the objects  in meters

Object 1 has a charge of

[tex]q_1=-2.3\cdot 10^{-6}\ c[/tex]

Object 2 has a charge of

[tex]q_2=-4.2\cdot 10^{-6}\ c[/tex]

They are separated by a distance of

d = 0.099 m

Calculate the force:

[tex]\displaystyle F=9\cdot 10^9\frac{2.3\cdot 10^{-6}*4.2\cdot 10^{-6}}{0.099^2}[/tex]

F=8.87 N

Compare between Convex lens and concave lens

Answers

Answer:

A convex lens or converging lens focuses the light rays to a specific point whereas a concave lens or diverging lens diverges the light rays. When these lenses are combined, they produce sharper images. Most of the eyeglass lenses use combinations of convex and concave lenses.

Please help i don't get it.
Which image matches the Topographic Map Shown?
Also, please explain how your answer is the correct answer. Why is your answer correct?

Answers

Answer:

the answer is 4

Explanation:

the picture matches eachother that's why I picked 4

Answer:

devils tower

Explanation:

on the topographic map the circular lines stop at at certain point because the moutain doesnt get any pointyer if you know what that means

in other words if the map continued with the circular lines all the way to the centerit would have been that snowny mountain

A device that makes energy easier is a machine. true or false

Answers

Answer:

trueeeeeeeeeeeeeeeeee

From what Tim explains in the movie, what can you infer about the temperature inside a refrigerator?


Answers


What is the value of x in this diagram?


Please help

Answer:

It's closest to 3 degrees celsius

Explanation:

Can someone help? Please?

Answers

Answer:

A. Speed

Explanation:

Speed is the magnitude of velocity, which is given in the question. Velocity is a vector quantity and therefore has both a magnitude and a direction. Only the former is implied in the question.

Answer
Speed

So it’s answer A

You slide a 15 kg box down a ramp with friction set to an angle of 38°. If the height of the ramp is 1.2 m, what's the frictional force on the box as it gets to the bottom of the ramp if the applied force down the ramp is 52 N?

Answers

Answer:

38.75N

Explanation:

According to Newton's second law

\sum Fx = ma

Fm-Ff = ma

Fm is the moving force

Fm = mgsin theta

Fm = 15(9.8)sin38

Fm = 90.5N

Ff is the frictional force

m is the mass = 15kg

a is two acceleration

Get the acceleration

a= F/m

a = 52/15

a ,= 3.45m/s²

Substitute the given values into the formula

90.5-Ff = 15(3.45)

90.5-Ff = 51.75

Ff = 90.5-51.75

Ff = 38.75N

Hence the frictional force on the box is 38.75N

What could you do to find the density of a fork, knife, and a spoon?

Answers

Answer:

Density is equal to mass divided by volume.

Explanation:

Density = mass / volume

or

p=m/v

Answer:

Use the formula D=m/v

Explanation: In order to find the volume for these objects, use a ruler and measure the length, width, and height. Proceed to multiply them all together, L*W*H. To find the mass of an object, I would say to use a triple beam balance. After finding both the mass and volume of you object, use the formula D = m/v and you'll get your answer.

it serves as the fuctional unit of the nervous system

Answers

The neuron is the functional unit of the nervous system.

Answer:

i would say the neuron

Other Questions
White Dolphin summary chapter 7 - 8 Akshay decides one day to run a marathon without any training. After 10 minutes your lapsed and akashay, has run half a mile, he begins to get cramps in his thigh he's also breathing very rapidly what is causing the cramps on his legs? Mi novio y yo_____ pelculas romnticas los viernesa. veamosb. bamos How does a wheel and axle make work easier? Need help with this:( which enzyme is responsible for creating a primer that allows the DNA replication process to start Which statement MOST accurately contrasts the portrayal of the bears in each story?A)the smallest bed in the Goldilocks tale.B)The bears in the Goldilocks story are a family, but the bears in "Scrapefoot"are merely described by their size.9The bears in the "Scrapefoot" story are a family, but the bears in theGoldilocks tale are merely described by their size.D)The bears in the Scrapefoot story scare the fox away, but the three bears inthe Goldilocks tale welcome her into their home. Nuts.com sells raw almonds for $10 per pound and roasted pistachios for $12 per pound. Christopher spends $70, before taxes and shipping, to purchase 6.3 total pounds of nuts How is a representative democracy different from a direct democracy?In a direct democracy, citizens are able to vote.In a direct democracy, citizens elect officials to make the laws.In a representative democracy, citizens make the laws themselves.In a representative democracy, citizens elect officials to make the laws.answer: D What was the immediate cause of WW1? 1.a. Alliances b. Assassination of Archduke Ferdinand c. Nationalism d. Imperialism 2.At first, America adopted a neutrality policy. What does this mean? a. America was looking for ways to become involved in the war. b. America wanted to stay out of the war. c. America wanted to broker a treaty between the warring countries. d. America sympathized with the Allied Powers. 3.A German submarine sank what British ship which helped bring the U.S. into WW1? 3.a. USS Maine b. Ironside c. Lusitania d. Titantic 4.What was the result of all the new technologies introduced during WW1? a. They made the war much shorter than earlier wars b. They made it easier for the Allies to advance through No Mans Land. c. They made it easier to kill and wound more soldiers than ever before in war d. They allowed Germany to defeat the United States easily. 5.Which of the following countries was not part of the Allied Powers? a. United States b. Britain c. France d. Germany ekusysnyeyuejteyjdjgdyjd I need help plz solve this 54 = 6B Janie was having a party and bought glow sticks for her 9 friends for $0.89 cach. If she pays with a $10 bill, how much change will she get back?" how many feet tall is the building there are 9 marbles in a bag, 3 of those marbles are red. what is the probability of picking a red marble randomly from the bag?answer as a simplified fraction in form a/b John Lewis dedicated his life to protecting the rights of Black people. What do you think about this quote from John Lewis?"Nothing can stop the power of a committed and determined people to make a difference in our society."AgreeDisagreeExplain why you voted Agree or Disagree If you make 75 cents on every appetizer and sell 1,200 appetizers in a month, and you make $6 every entree and sell 175 per month , which is more profitable A) appetizersB) entrees What nuclear reaction is shown in the equation below? A. Nuclear fusion B. Nuclear fission C. Positron emission D. Beta decay Thermodynamics and QHow much energy is needed to heat 40.5g of water from 15.6C to 73.0C Density is defined by the equation d = m/v. Calculate the density of the wooden block, the rock, and the water by dividing the mass of each object by its volume.