graph the following system of inequalities
4x + 2y ≤ 16
x + y ≥ 4

The graph of the parametric equations x(θ) = 2cos(θ) and y(θ) = 5sin(θ) over the interval [0,π] is show below.

What is parametric equation?

A parametric equation is a set of equations that expresses a set of related variables in terms of one or more independent variables, called parameters. In other words, it is a way to describe a curve or a surface in terms of one or more parameters that control the motion of a point or a set of points.

For the parametric equations x(θ) = 2cos(θ) and y(θ) = 5sin(θ) over the interval [0,π], we can create a table of values by plugging in values of θ and finding the corresponding values of x and y:

θ x = 2cos(θ) y = 5sin(θ)

0 2 0

π/6 √3 5/2

π/4 √2 5/√2

π/3 1 5√3/2

π/2 0 5

2π/3 -1 5√3/2

3π/4 -√2 5/√2

5π/6 -√3 5/2

π -2 0

We can then plot these points on a graph and connect them to form a curve.

Here is the graph of the parametric equations x(θ) = 2cos(θ) and y(θ) = 5sin(θ) over the interval [0,π]:

To learn more about parametric equation visit the link:

https://brainly.com/question/30451972

#SPJ9

Answer:

answer is (-2,5)

Step-by-step explanation:

gonna make 2 by 5 into Percent

x=0.4y-4

3x-9y=-51

step 2 Add 3 into first column and make it negative

-3x=-1.2y+12

then move y to other side

-3x+1.2y=12

3x-9y=-51

-7.8y=-39

y=5

U got y now

add it into y in first column

x= 2/5(5)-4

then it be 2-4= -2

x=-2

+) Replace x = (2/5)y - 4 into 3x - 9y = -51

[tex] 3 \times ( \frac{2}{5} y - 4) - 9y = - 51 \\ [/tex]

[tex] \frac{6}{5} y - 12 - 9y = - 51[/tex]

[tex]\frac{6}{5} y - 9y = - 51 + 12 = - 39[/tex]

[tex] \frac{ - 39}{5} y = - 39[/tex]

[tex]y = (- 39) \div \frac{( - 39)}{5} = ( - 39) \times \frac{5}{( - 39)} [/tex]

[tex]y = 5[/tex]

[tex]x = \frac{2}{5} y - 4 = \frac{2}{5} \times 5 - 4 = 2 - 4 [/tex]

[tex]x = - 2[/tex]

Ans: (x;y) = (-2;5)

Ok done. Thank to me >:33

In conclusion, while Mi-Young's sample is random and the population standard deviation is not known, the sample size is not large enough, and we cannot assume the population is normal. Thus, the requirements for a one-sample t-confidence interval for a mean have not been fully met in this case.

To determine if the requirements for a one-sample t-confidence interval for a mean have been met in Mi-Young's case, we should consider the following:

1. The sample is random: Mi-Young randomly selects 18 state employees, so this requirement is met.
2. The population is normal: We don't have enough information to determine this, but the Central Limit Theorem states that for sample sizes greater than or equal to 30, the sampling distribution is approximately normal. Since Mi-Young's sample size is smaller, we cannot assume the population is normal.
3. The sample size is large enough: Mi-Young's sample size is 18, which is smaller than the recommended size of 30 or more. Therefore, the sample size is not large enough.
4. The population standard deviation is not known: We have no information about the population standard deviation, so we assume it's not known.

In conclusion, while Mi-Young's sample is random and the population standard deviation is not known, the sample size is not large enough, and we cannot assume the population is normal. Thus, the requirements for a one-sample t-confidence interval for a mean have not been fully met in this case.

learn more about Mi-Young's sample

https://brainly.com/question/20333743

#SPJ11

The polar form of the equation x = 4 is r = 4 / cos(θ).

To convert the equation x = 4 to polar form:

To convert the equation x = 4 to polar form using variables r and θ (theta),

Follow these steps:

Step 1: Recall the polar to rectangular coordinate conversion formulas:
x = r * cos(θ)
y = r * sin(θ)

Step 2: Replace x in the given equation with the corresponding polar conversion formula:
r * cos(θ) = 4

Step 3: Solve for r:
r = 4 / cos(θ)

So, the polar form of the equation x = 4 is r = 4 / cos(θ).

To know more about Polar form:

https://brainly.com/question/11741181

#SPJ11

The method of moments estimate for [tex]\lambda[/tex] is 1 / sample mean.

To find the method of moments estimate for [tex]\lambda[/tex], we equate the sample mean to the theoretical mean.

To find the method of moments estimate for lambda, we first calculate the first moment (or mean) of the distribution. For the exponential distribution, the mean is equal to 1/[tex]\lambda[/tex].

The theoretical mean of an exponential distribution is given by:

E(Y) = 1/[tex]\lambda[/tex]

The sample mean is the sum of the observations divided by the sample size:

y-bar = (1/n) * (y1 + y2 + ... + yn)

Next, we equate the sample mean to the theoretical mean (calculated from the first moment) and solve for [tex]\lambda[/tex].

Setting these two equal, we get:

1/[tex]\lambda[/tex] = y-bar

Solving for lambda, we get:

[tex]\lambda[/tex] = 1/y-bar

Therefore, the method of moments estimate for [tex]\lambda[/tex] is 1 divided by the sample mean.

Learn more about method of moments

brainly.com/question/20292300

#SPJ11

The largest possible value of f(8) is 14.

Since f is continuous on [4,8] and differentiable on (4,8), we can apply the Mean Value Theorem (MVT) on the interval [4,8]. The MVT states that there exists a c in (4,8) such that

f(8) - f(4) = f'(c)(8-4)

or equivalently,

f(8) = f(4) + f'(c)(8-4).

Since f(4) = -6 and f'(x) ≤ 10 for all x in (4,8), we have

f(8) = -6 + f'(c)(8-4) ≤ -6 + 10(8-4) = 14.

Therefore, the largest possible value of f(8) is 14. This maximum value can be achieved by a function that is increasing at the maximum rate of 10 on the interval (4,8) and passes through the point (4,-6).

Learn more about Mean Value Theorem

brainly.com/question/30403137

#SPJ11

The correct choice that completes the sentence is: Besides vertical asymptotes, the zeros of the denominator of a rational function give rise to holes oblique so hat , the correct choice is b

Explanation:-

A rational function is a fraction with polynomials in the numerator and denominator. The denominator of a rational function cannot be zero because division by zero is undefined. Therefore, the zeros of the denominator are important in analyzing the behaviour of a rational function.

When a rational function has a zero in the denominator, it creates a vertical asymptote. The function becomes unbounded as it approaches the vertical asymptote from both sides. However, if the numerator has a zero at the same point where the denominator has a zero, the function may have a hole in the graph instead of a vertical asymptote.

In addition to vertical asymptotes and holes, the zeros of the denominator of a rational function can also give rise to oblique asymptotes. An oblique asymptote occurs when the degree of the numerator is exactly one more than the degree of the denominator. In this case, the function approaches a slanted line as x goes to infinity or negative infinity.

Therefore, analyzing the zeros of the denominator of a rational function is crucial in understanding its behaviour and graph. It can help identify vertical asymptotes, holes, and oblique asymptotes, providing valuable insights into the function's behavior.

Know more about asymptotes and zeros of the Rational Function click here;

https://brainly.com/question/29000857

#SPJ11

[tex]6 + 36x + 72x^2 + 96x^3[/tex] / 3! + ... this is the Maclaurin series for f(x). Note that since e^x has a well-known Maclaurin series, we were able to simplify the original expression before finding the series.

The problem asks us to find the Maclaurin series for the function:

[tex]f(x) = 6e^x e^4x[/tex] sigma^infinity_n=0 (1^n / n!)

To do this, we first need to recognize that the expression inside the sigma notation is actually the Maclaurin series for e^x:

sigma^infinity_n=0 (1^n / n!) = e^x

We can substitute this expression into the original function to get:

[tex]f(x) = 6e^x e^4x e^x[/tex]

Now we can simplify this expression using the laws of exponents:

[tex]f(x) = 6e^x * e^(4x) * e^x[/tex]

f(x) = 6e^(6x)

Now we need to express this function as a Maclaurin series. We can start by writing out the first few terms of the series:

[tex]f(x) = 6e^(6x)[/tex]

[tex]= 6(1 + 6x + (6x)^2 / 2! + (6x)^3 / 3! + ...)[/tex]

[tex]= 6 + 36x + 72x^2 + 96x^3 / 3! + ...[/tex]

This is the Maclaurin series for f(x). Note that since e^x has a well-known Maclaurin series, we were able to simplify the original expression before finding the series.

To learn more about Maclaurin series visit: https://brainly.com/question/31383907

#SPJ11

To find the equation of the tangent plane to the given surface at the specified point.

Given surface: z = 6(x - 1)^2 + 6(y + 3)^2

Specified point: (2, -2, 14)

Step 1: Find the partial derivatives with respect to x and y. ∂z/∂x = 12(x - 1) ∂z/∂y = 12(y + 3)

Step 2: Evaluate the partial derivatives at the specified point (2, -2, 14). ∂z/∂x|_(2,-2,14) = 12(2 - 1) = 12 ∂z/∂y|_(2,-2,14) = 12(-2 + 3) = 12

Step 3: Use the tangent plane equation: z - z₀ = ∂z/∂x(x - x₀) + ∂z/∂y(y - y₀), where (x₀, y₀, z₀) is the specified point. z - 14 = 12(x - 2) + 12(y + 2)

Step 4: Simplify the equation. z - 14 = 12x - 24 + 12y + 24 z = 12x + 12y + 14

So, the equation of the tangent plane to the given surface at the specified point (2, -2, 14) is z = 12x + 12y + 14.

Know more about tangent plane,

https://brainly.com/question/31397815

#SPJ11

It is true that A biased estimate of an odds ratio can exist even if this estimate is very precise.

A biased estimate of an odds ratio can exist even if this estimate is very precise. Bias refers to a systematic error in the estimation process, which can affect the accuracy of the estimate even if it is based on a large sample size or other factors that might increase precision. Therefore, it is important to identify and address sources of bias in the estimation of odds ratios to ensure that the estimates are as accurate as possible.

Know more about odds ratio here:

https://brainly.com/question/28478631

#SPJ11

The size of the files on Bobby’s drive (in gigabytes) as a function of time (in seconds) is given by y=0.4x+6

Given that Bobby was transferring files from his computer onto a flash drive.

The flash drive already had 6 gigabytes of data before the transfer

an additional 0.4 gigabyte were transferred onto the drive each second.

Let x be the number of seconds

y be the size of the files on Bobby’s drive (in gigabytes) as a function of time

y=0.4x+6

Hence, the graph of y=0.4x+6 is given in the attachment

To learn more on slope intercept form click:

https://brainly.com/question/9682526

#SPJ1

Answer:

2

Step-by-step explanation:

(½ × 8 + 6) ÷ 5

Order of operations: BODMAS - (Brackets, Orders, Division, Multiplication, Addition, Subtraction)

So Brackets first, and within the bracket we do mulplication first, then addition.

(4 + 6) ÷ 5

10 ÷ 5

Division is left so obviously

Ans : 2

In the given, the average life span for American women in 2000 was approximately 79.1 years.

The given equation for the average life span of American women from 1907 through 2007 is:

W(t) = 49.9 + 17.1 ln(t)

Here, t is measured in 20-year intervals, with t=1 corresponding to 1907.

To find the average life span for American women in a specific year, we need to first determine the corresponding value of t. For example, to find the average life span in 1950, we can use:

t = (1950 - 1907) / 20 + 1 = 3.22

Using this value of t in the equation, we get:

W(3.22) = 49.9 + 17.1 ln(3.22) ≈ 68.5 years

Therefore, the average life span for American women in 1950 was approximately 68.5 years.

Similarly, we can find the average life span for other years by using the corresponding values of t. For example, for the year 2000, we have:

t = (2000 - 1907) / 20 + 1 = 5.65

W(5.65) = 49.9 + 17.1 ln(5.65) ≈ 79.1 years

Therefore, the average life span for American women in 2000 was approximately 79.1 years.

Learn more about average here: https://brainly.com/question/24233224

#SPJ1

Answer:

[tex] {x}^{2} - 36 = 5x[/tex]

[tex] {x}^{2} - 5x - 36 = 0[/tex]

[tex](x - 9)(x + 4) = 0[/tex]

[tex]x = 9[/tex]

The correct state equations for the given transfer function model are (b) x2=1/3(6f(t)-10x1-6x2) and (e) x2=1/3(6f(t)-10x1-6x2).

The state equations represent the dynamics of a system in terms of its state variables. In this case, the given transfer function model relates the output variable y(s) to the input variable F(s) in the Laplace domain. The state variables are defined as x1 = y and x2 = y, which means both x1 and x2 represent the same variable y.

From the given transfer function, we can rewrite it in state-space form as follows:

y(s)/F(s) = 6/(3x2 + 6x + 10)

Multiplying both sides by (3x2 + 6x + 10) to eliminate the fraction, we get:

y(s) = 2x2 + 4x + 6/(3x2 + 6x + 10)F(s)

Now, we can express this equation in state-space form as:

x1' = x2

x2' = 1/3(6f(t) - 10x1 - 6x2)

where x1' and x2' represent the derivatives of x1 and x2 with respect to time t, respectively, and f(t) represents the input function in the time domain.

Therefore, the correct state equations for the given transfer function model are (b) x2=1/3(6f(t)-10x1-6x2) and (e) x2=1/3(6f(t)-10x1-6x2).

To learn more about transfer function model here:

brainly.com/question/30465063#

#SPJ11

To determine whether there is convincing evidence that the true proportion of cockroaches that would die on plasterboard is different than the true proportion of cockroaches that would die on glass.

We need to conduct a hypothesis test.

Let p1 be the true proportion of cockroaches that would die on glass and p2 be the true proportion of cockroaches that would die on plasterboard.

The null hypothesis is that there is no difference between the true proportions, that is, H0: p1 = p2. The alternative hypothesis is that the true proportions are different, that is, Ha: [tex]p1 ≠ p2.[/tex]

We can use a two-sample proportion test to test this hypothesis. The test statistic is given by:

[tex]z = (p1 - p2) / sqrt(p_hat * (1 - p_hat) * (1/n1 + 1/n2))[/tex]

where p_hat [tex]= (x1 + x2) / (n1 + n2),[/tex] x1 and x2 are the number of cockroaches that died on glass and plasterboard, respectively, and n1 and n2 are the sample sizes.

Using the given data, we have:

[tex]p_hat = (25 + 18) / (36 + 36) = 0.694[/tex]

[tex]n1 = 36, n2 = 36[/tex]

[tex]x1 = 25, x2 = 18[/tex]

Plugging these values into the formula for the test statistic, we get:

[tex]z = (0.694 - 0.5) / sqrt(0.5 * 0.5 * (1/36 + 1/36)) = 1.414[/tex]

Using a standard normal distribution table or calculator, we find that the p-value for this test is approximately 0.157. Since this p-value is greater than the common significance level of 0.05, we fail to reject the null hypothesis.

Therefore, based on the given interval with null hypothesis, we do not have convincing evidence to suggest that the true proportion of cockroaches that would die on plasterboard is different than the true proportion of cockroaches that would die on glass.

To learn more about null hypothesis, visit here

https://brainly.com/question/28920252

#SPJ4

The area of the composite shape is 40.57 square m and the perimeter is 34.57 meters

The surface area of composite shapes can be found by breaking the composite shape down into simpler shapes and then finding the surface area of each individual shape.

Here, we have

Area = Area of rectangle + circle

So, we have

Area = 4 * 7 + 22/7 * (4/2)^2

Area = 40.57 square m

So, the area is 40.57 square m

For the perimeter, we have

Perimeter = 2 * (4 + 7) + 2 * 22/7 * (4/2)

Perimeter = 34.57

Read more about areas at

brainly.com/question/16519513

#SPJ1

The radius of the circle is [tex]\frac{4\sqrt3}{3}[/tex] cm.

What is triangle?

A triangle is a form of polygon with three sides; the intersection of the two longest sides is known as the triangle's vertex. There is an angle created between two sides. One of the crucial elements of geometry is this.

Here consider the equilateral triangle XYZ.

Then XY=YZ=XZ = 8 cm.

Now using formula then,

Radius of the circle = [tex]\frac{a}{2\sqrt3}[/tex]

Where a = side length of triangle.

Then,

Radius = [tex]\frac{8}{2\sqrt3}=\frac{4}{\sqrt3}=\frac{4\sqrt3}{3}[/tex]

Hence the radius of the circle is [tex]\frac{4\sqrt3}{3}[/tex] cm.

To learn more about triangle refer the below link

https://brainly.com/question/17335144

#SPJ9

The parabola with equation y=ax^2+bx whose tangent line at (1, 1) has equation y=4x-3; y = 3x^2 - 2x

The tangent line at (1, 1) has equation y = 4x - 3, which means that the slope of the tangent line at that point is 4. We know that the derivative of y = ax^2 + bx is y' = 2ax + b, which gives us the slope of the tangent line at any point on the parabola. So, we can set 2ax + b equal to 4 (the slope of the tangent line) and substitute x = 1 and y = 1 (the point on the tangent line and parabola, respectively).
2a(1) + b = 4
a(1)^2 + b(1) = 1
Simplifying the second equation, we get b = 1 - a. Substituting this into the first equation and simplifying, we get:
2a + 1 - a = 4
a = 3
Therefore, b = 1 - a = -2. The equation of the parabola is y = 3x^2 - 2.
To find the parabola with equation y = ax^2 + bx whose tangent line at (1, 1) has the equation y = 4x - 3, we will first determine the values of a and b.
Since the tangent line touches the parabola at (1, 1), we can substitute these values into both the parabola and tangent line equations:
1 = a(1)^2 + b(1) (Parabola equation)
1 = 4(1) - 3 (Tangent line equation)
From the tangent line equation, we see that it is already satisfied. Now we need to find the derivative of the parabola equation with respect to x to find the slope of the tangent line:
dy/dx = 2ax + b
At the point (1, 1), the slope of the tangent line is equal to the slope of the parabola:
4 = 2a(1) + b
We already know from the parabola equation that:
1 = a + b
Now, we have a system of linear equations:
4 = 2a + b
1 = a + b
Solving the system, we find that a = 3 and b = -2. Therefore, the equation of the parabola is:
y = 3x^2 - 2x

To learn more about parabola, click here:

brainly.com/question/31142122

#SPJ11

The confidence interval can be expressed as:

p ± E = 0.888 ± 0.111

To express the confidence interval 0.777 < p < 0.999 in the form p ± E, we need to first calculate the point estimate of the population proportion p.

The point estimate is simply the midpoint of the confidence interval, which is given by:

Point estimate = (lower limit + upper limit) / 2

= (0.777 + 0.999) / 2

= 0.888

Next, we need to calculate the margin of error (E) using the formula:

E = (upper limit - point estimate) = (0.999 - 0.888) = 0.111

Therefore, the confidence interval can be expressed as:

p ± E = 0.888 ± 0.111

So the confidence interval is 0.777 < p < 0.999, which can also be written as p ± 0.111.

know more about confidence interval visit :

https://brainly.com/question/24131141

#SPJ1

Answer:

C. 8x + 3y = 45

Step-by-step explanation:

Currently, the line we're given is in standard form, whose general form is

[tex]Ax+By=C[/tex]

We know that parallel lines have the same slope (m), as

[tex]m_{2}=m_{1}[/tex], where m2 is the slope of the line we're trying to find and m1 is the slope of the line we're given.

We don't know the slope (m1) of the line we're already given while the line is in standard form, but we can find it by converting the line from standard form to slope-intercept form, whose general form is

[tex]y=mx+b[/tex], where m is the slope and b is the y-intercept.

To convert from standard form to slope-intercept form, we must simply isolate y on the left-hand side of the equation:

[tex]8x+3y=15\\3y=-8x+15\\y=-8/3x+5[/tex]

Thus, the slope of the first line is -8/3 and the slope of the other line is also -8/3.

We can find the y-intercept of the other line by using the slope-intercept form and plugging in -8/3 for m, and (6, -1) for x and y:

[tex]-1=-8/3(6)+b\\-1=-16+b\\15=b[/tex]

Thus, the equation of the line in slope-intercept form is y = -8/3x + 15

We can covert this into standard form, first by clearing the fraction (multiply both sides by 3) and isolate the constant made after multiplying both sides by 3 on the right-hand side of the equation

[tex]3(y=-8/3x+15)\\3y=-8x+45\\8x+3y=45[/tex]

Since point A is an element of a direct variation, each point, other than A, that are elements of this direct variation are (-2, -8) and (2, 8).

In Mathematics, a direct variation is also referred to as direct proportion and it can be modeled by using the following mathematical expression or function:

y = kx

Where:

Under direct variation, the value of x represent an independent variable while the value of y represents the dependent variable. Therefore, the constant of proportionality (variation) can be calculated as follows:

Constant of proportionality (k) = y/x

Constant of proportionality (k) = -4/-1 = 8/2 = -8/-2

Constant of proportionality (k) = 4.

Therefore, the required function is given by;

y = kx

y = 4x

Read more on direct variation here: brainly.com/question/15785278

#SPJ1

Answer:

Step-by-step explanation:

310 g x (1-0.057) = 292.33

(subtraction as it decreases)

After 2 minutes, we have 292.33 g x (1-0.057) = 310 g x (1-0.057)2 = 275.67 grams.

After 9 minutes, approximately 182.8 grams of the element remains

The probability that y takes a value less than 1/3 is approximately 0.11.

We are given that the cumulative distribution function (cdf) of the random variable y is defined as:

F(x) = { 0, x ≤ 0

[tex]x^2,[/tex] 0 < x < 1

1, x ≥ 1

We want to find the probability that the random variable y takes a value less than 1/3, i.e., P(y < 1/3).

Since F(x) is the cdf of y, we have:

P(y < 1/3) = P(y ≤ 1/3) = F(1/3)

To find F(1/3), we need to consider two cases:

Case 1: 0 ≤ 1/3 < 1

In this case, we have:

F(1/3) = (1/3[tex])^2[/tex] = 1/9

Case 2: 1/3 ≥ 1

In this case, we have:

F(1/3) = 1

Therefore, the probability that y takes a value less than 1/3 is:

P(y < 1/3) = F(1/3) = 1/9

Rounding off to the second decimal place, we get:

P(y < 1/3) ≈ 0.11

Therefore, the probability that y takes a value less than 1/3 is approximately 0.11.

Learn more about probability

https://brainly.com/question/30034780

#SPJ4

Full Question

Let y be a random variable with cdf F(x) = { 0, x 0 Find P(x < 1/3) (round off to second decimal place).

Answer:

Step-by-step explanation:

The y-intercept of the line of fit is 41.16, which means that when the machine is first filled, it starts with approximately 41.16 fluid ounces of diet soda.

In the context of the data, the y-intercept represents the initial amount of diet soda in the machine before any soda is purchased. This information can be useful for determining how much soda is being purchased by customers over time, as it provides a baseline for comparison.

Therefore, the correct answer is: The y-intercept is 41.16. The machine starts with 41.16 ounces of diet soda.

Answer:

y-intercept is 41.16. The machine starts with 41.16 ounces of diet soda.

Step-by-step explanation:

The answer for the differential equation is:

f(theta) = -sin(theta) - cos(theta) + 4*theta + 2

To solve for f(theta), we need to integrate twice since f''(theta) is given.

First, we integrate f''(theta) with respect to theta to get:

f'(theta) = -cos(theta) + sin(theta) + C₁

where C₁ is an arbitrary constant of integration.

Next, we integrate f'(theta) with respect to theta to get:

f(theta) = -sin(theta) - cos(theta) + C₁*theta + C₂

where C₂ is another arbitrary constant of integration.

To solve for C₁ and C₂, we use the initial conditions given:

f(0) = 2 => C₂ = 2

f'(0) = 2 => C₁ = 4

Therefore, the solution to the differential equation is:

f(theta) = -sin(theta) - cos(theta) + 4*theta + 2

Learn more about function on:

https://brainly.com/question/10439235

#SPJ11

The solution to the given trigonometric identity is: cos y

The problem we are given to solve is:

[(sec y - tan y)(sec y + tan y)]/(sec y)

Multiplying out the numerator gives us:

(sec²y - tan²y)/sec y

Dividing each term by sec y gives us:

sec y - ((tan²y)/sec y)

We know that tan y = sin y/cos y

Thus:

tan²y = (sin y/cos y)*(sin y/cos y)

1/cos y = sec y

Thus, we now have:

sec y - sin²y(sec y)

We can rewrite this as:

1/cos y - sin²y/cos y

= (1 - sin²y)/cos y

= cos²y/cos y

= cos y

Read more about trigonometric identities at: https://brainly.com/question/7331447

#SPJ1

A test for two proportions and the null hypothesis would be the best test statistic to assess the variance in bacon consumption from 2011 to 2016.

The null hypothesis for the test is that the proportion of adults who consumed at least 3 pounds of bacon in 2011 is equivalent to the proportion of adults who consumed at least three pounds of bacon in 2016. A potential explanation would be that the percentage of adults who ate at least 3 pounds of bacon in 2011 and 2016 differed.

Additionally, the test statistic may be likened to a chi-squared distribution with one degree of freedom; hence, it is necessary to compute the test statistic's p-value in order to establish whether the null hypothesis can be ideally rejected or not.

Complete Question:

In 2011, 17 percent of a random sample of 200 adults in the United States indicated that they consumed at least 3 pounds of bacon that year. In 2016, 25 percent of a random sample of 600 adults in the United States indicated that they consumed at least 3 pounds of bacon that year.  Assuming all conditions for inference are met which is the most appropriate test statistic to determine variation of bacon consumption from 2011 to 2016 ?

Read more about null hypothesis on:

https://brainly.com/question/29576929

#SPJ4

The constant c in the joint PDF of two random variables X, Y given by fX,Y(x,y) = c, where 0≤x≤y≤2, is 1/2.

Consider the joint PDF of two random variables X, Y given by fX,Y(x,y) = c, where 0≤x≤y≤2. To find the constant c, we need to make sure that the joint PDF integrates to 1 over the given region.

Here's a step-by-step explanation:

1. Set up the double integral for fX,Y(x,y):
  ∬fX,Y(x,y) dx dy = ∬c dx dy

2. Determine the integration limits:
  Since 0≤x≤y≤2, we have:
  - x goes from 0 to y (inner integral)
  - y goes from 0 to 2 (outer integral)

3. Set up the double integral with the correct limits:
  ∬c dx dy = ∫(from 0 to 2) ∫(from 0 to y) c dx dy

4. Perform the integration:
  First, integrate with respect to x:
  ∫(from 0 to 2) [cx] (from 0 to y) dy = ∫(from 0 to 2) cy dy

  Next, integrate with respect to y:
  [c/2 * y^2] (from 0 to 2) = c * (4/2) = 2c

5. Equate the double integral to 1 and solve for c:
  2c = 1 => c = 1/2

Your answer: The constant c in the joint PDF of two random variables X, Y given by fX,Y(x,y) = c, where 0≤x≤y≤2, is 1/2.

Learn more about joint PDF

brainly.com/question/31064509

#SPJ11

The linear equation y = -3x - 3, have a slope of -3 while the y intercept is -3.

An equation is an expression that can be used to show the relationship between two or more numbers and variables using mathematical operators.

The standard form of a linear equation is:

y = mx + b

Where m is the rate of change (slope); and b is the y intercept

Given the equation:

y = -3x - 3

The slope of the graph is -3 while the y intercept is -3.

Find out more on equation at: https://brainly.com/question/2972832

#SPJ1