Answer:
Light consists of photons, which are produced when an object's atoms heat up. Light travels in waves and is the only form of energy visible to the human eye.
Explanation:
Now What is light?
-Light ( or light energy ) is defined as a form of electromagnetic radiation and a type of kinetic energy.
-Light is made up of photons. Photons is the basic unit of light. They are produced when an object's atom is subjected to heat. The more the atoms are heated, the more photons are created.
-Light travels in the form of a wave but it does not require any medium for transmission.
-Light travels so fast, nothing is faster than it. It travels at a constant speed of 186,282 miles/sec ( 300,000 km/sec ) in vacuum and whether the source is moving or stationary.
-Light can be measured in either joules, calories ( energy units ), quanta and einsteins ( quantum units ). Conversion from one unit to another heavily depends on wavelength.
Now an unaided human eye can only see the visible light, namely red, orange, yellow green, blue, indigo and violet (Roy G Biv) but light also comes in other forms that we cannot see, they are named, radio wave, microwave, infrared, ultraviolet, x-ray and gamma ray.
what the balance electrons for calcium
Answer:
its two valence electrons
Explanation:
Calcium is a group 2 element with two valence electrons. Therefore, it is very reactive and gives up electrons in chemical reactions.
UR WELCOME!! :)
HELP PLEASE ?? can u answer this multiple choice for me please?
Answer:
.04 kg m/s
Explanation:
Momentum is simply mass multiplied by velocity given by p = mv. You can consider momentum as mass in motion.
Before the collision, the data given for the toy train:
v = 0.5m/s
m = 75g
We need to convert grams into the SI unit of mass, kg.
75g / 1000g * 1kg = 0.075kg
Using p = mv, we can determine:
p = 0.075kg * 0.5m/s = 0.0375 kg m/s
Rounding to the value of 1 sig-fig, it comes out to be 0.04 kg m/s.
A spring with a spring constant of 200 is compressed 0.5 . What is the potential energy stored in the spring
Answer:
E = 25 J
Explanation:
Given that,
Spring constant, k = 200
Compression, x = 0.5
We need to find the potential energy stored in the spring. The formula for the stored potential energy in the spring is given by :
[tex]E=\dfrac{1}{2}kx^2[/tex]
Put all the values,
[tex]E=\dfrac{1}{2}\times 200\times 0.5^2\\\\E=25\ J[/tex]
So, 25 J of potential enersy is stored in the spring.
A fixed mass of gas has a volume of 25 cm³. The pressure of the gas is 100 kPa.
The volume of the gas is slowly decreased by 15 cm³ at constant temperature.
What is the change in pressure of the gas?
A)67 kPa
B)150 kPa
C)170 kPa
D)250 kPa
Answer:
67 kPa
Explanation:
Given that,
Initial volume, V₁ = 25 cm³
Initial pressure, P₁ = 100 kPa
Final volume, V₂ = 15 cm³
We need to find the change in pressure of the gas. The relation between the volume and pressure of a gas is given by :
[tex]P\propto \dfrac{1}{V}\\\\\dfrac{P_1}{P_2}=\dfrac{V_2}{V_1}\\\\P_2=\dfrac{P_1V_1}{V_2}\\\\P_2=\dfrac{100\times 25}{15}\\\\=166.66\ kPa[/tex]
or
= 167 kPa
The change in pressure,
= P₂ - P₁
= 167 kPa - 100 kPa
= 67 kPa
Hence, the correct option is (a).
a ball of mass 0.2 kg is dropped from a height of 20m on impact to the ground it loses in 30 joule of energy calculate the height it reaches on rebound
Answer:
new PE at top=original PE - energy lost
mgh=.2(9.8)20-30
Explanation:
mgh=.2(9.8)20-30 = 9.2
Explain why magnetic damping might not be effective on an object made of several thin conducting layers separated by insulation.
Answer:
The eddy currents will be very small.
Explanation:
An object made of several thin conducting layers separated by insulation may not be affected by magnetic damping because the eddy current produced in each layer due to induction will be very small and the opposing magnetic flux produced by the eddy currents will be very small.
A 15.0 kilogram cart initially traveling at 2.0 meters per second east accelerates uniformly at 0.75 meter per second squared east for 6.0
seconds. What is the speed of the cart at the end of this 6,0 second interval? Please include all work - including givens, formula, substitution,
and units for full credit. (2)
Answer:
Explanation:
Since this is not parabolic motion, it is one-dimensional motion. Very simple. What we are given is
mass: 15.0 kg
initial velocity: 2.0 m/s
acceleration: .75 m/s/s
time: 6.0 seconds
Since we are looking for final velocity, the equation we need for this is
v = v0 + at that says final velocity is equal to the initial velocity plus the acceleration of the object times how long it travels. We don't have a need for the mass here at all.
[tex]v=2.0\frac{m}{s}+.75\frac{m}{s^2}(6.0s)[/tex]
Notice that one of the seconds labels to the right of the plus sign cancel out, leaving us with like units...which we HAVE to have if we want to add.
Simplifying a bit gives us
v = 2.0 m/s + 4.5 m/s so
v = 6.5 m/s
What are the wavelengths of x-rays and gamma rays?
a.
x-rays - 3 pm to 20 nm
gamma rays- less than 3 pm
c.
x-rays - 3 mm
gamma rays- 20 to 50nm
b.
x-rays - 400nm
gamma rays- 700nm
d.
None of the above
Answer:
1. less. 2 greater. 3. the same. 8. An FM radio station broadcasts its signal at a fre- ... wave 3. | 3x108 = 269.15x107). = 3.20m. 2. An electromagnetic AM-band radio wave could have Base your answers to questions 9 and 10 on the informa- ... X rays. -Microwaves. -Long
A piece of iron has a mass of 30 g and its volume is 6.2 cm3. What is its density?
Answer:
Density = 4.84 g/cm³
Explanation:
Given the following data;
Mass = 30 g
Volume = 6.2 cm³
To find the density of the piece of iron;
Density can be defined as mass all over the volume of an object.
Simply stated, density is mass per unit volume of an object.
Mathematically, density is given by the equation;
[tex]Density = \frac{mass}{volume}[/tex]
Substituting into the equation, we have;
[tex]Density = \frac{30}{6.2}[/tex]
Density = 4.84 g/cm³
Water is being heated on the stove at 90 ⁰C. What is this temperature on the Fahrenheit degrees?
Answer:
194 degrees farenheit! hot
Explanation:
(90°C × 9/5) + 32 = 194°F
Answer:
194
Explanation:
to get from celcius to Fahrenheit
multiply temperature by 2 and add 30
The reading on your speedometer is the
A) average velocity
B) none of these is correct
C) speed
D) instantaneous velocity
NEED ANSWER QUICK, WILL GIVE BRAINLIEST! How many nails do sapiens have?
A. 6
B. 10
C. 3
D. None
Answer:
nice calculations!
Explanation:
(b) How much energy must be supplied to boil 2kg of water? providing that the specific latent heat of vaporization of water is 330 kJ/kg.
Complete question:
(b) How much energy must be supplied to boil 2kg of water? providing that the specific latent heat of vaporization of water is 330 kJ/kg. The initial temperature of the water is 20 ⁰C
Answer:
The energy that must be supplied to boil the given mass of the water is 672,000 J
Explanation:
Given;
mass of water, m = 2 kg
heat of vaporization of water, L = 330 kJ/kg
initial temperature of water, t = 20 ⁰C
specific heat capacity of water, c = 4200 J/kg⁰C
Assuming no mass of the water is lost through vaporization, the energy needed to boil the given water is calculated as;
Q = mc(100 - 20)
Q = 2 x 4200 x (80)
Q = 672,000 J
Q = 672,000 J
Q = 672,000 J
Therefore, the energy that must be supplied to boil the given mass of the water is 672,000 J
1d. Conservation of energy is demonstrated in this roller coaster example.
The Conservation of Energy is a principle which states that energy cannot be created
or destroyed, but can be altered from one form to another
Friction plays a significant role in the efficiency of the rollercoaster cars. Explain how, even
with friction, the law of conservation of energy still holds true. (2 points)
Answer:
can you clear your question I can't understand
Q= Which one of the following statement is incorrect?
A. When a switch is closed in a circuit, no current flows.
B. A switch is a device for turning on and off an electric current.
C. An electric current is a complete loop around which a current can flow.
D. An electric current is a flow of charge
Answer:
A.
Explanation:
I think it might be the big number A
What would be the weight (in Newtons) of a person with a mass of 80 kg on Earth, where the acceleration due to gravity is approximately 9.8 m/s/s? *
please help asap
Answer:
ml tayo 1v1 durugin kita
Explanation:
ano takot ml 1v1
What state of matter did the earth need to be in order for planetary differentiation to occur?
Answer: Gas, liquid, or solid?
hich of these best describes Earth’s mantle?
Most dense layer, consists of the outer and inner parts
Thinnest under the oceans and thickest under continents
Middle layer, density increases with depth as pressure increas
Answer:
Middle layer, density increases with depth as pressure increases
Explanation:
The Earth's mantle is the middle layer of the earth. It is the largest layer of the earth consisting of about 83 % of the earth's volume and continues to a depth of 2900 km. Also, the mantle is hot and made of solid rock. It is hot since it is close to the core and its pressure and density increases with depth causing it to be more solid.
So, the Earth's mantle is the middle layer, density increases with depth as pressure increases.
what happens when a light ray is incident normally to the interface of two media?
Explanation:
ahhh, maybe you mean , what happens when a light ray hits the interface of two media perpendicular to the normal.
if that is the case then the light ray will not bend but it will travel in the same direction in the second medium as it was travelling in it's first medium
hope this helps bro
As an IT technician for your company, you have been notified that the Windows domain does not seem to be functioning properly. Being familiar with domains, you are fairly confident you know what the issue is. But just to be safe, you take the applicable time to gather additional information and to identify what, if anything, has changed.
Which of the following is the BEST next step?
A. Determine the appropriate fix.
B. Create a hypothesis.
C. Implement the fix.
D. Identify what has changed.
E. Gather information.
Answer: Create a hypothesis
Explanation:
From the information given, information has been gathered and the identification to ascertain if there's a change. Then, an hypothesis has to be created in order to know what the problem is.
One has to carry out some research in order to know what went wrong and should also validate the hypothesis by consulting with ones peers. By doing this, the most likely causes of the issues will be gotten.
Based on the law of conservation of energy, how can we reasonably improve a machine’s ability to do work?
Answer:
We can reasonably improve a machines ability to do work by reducing the friction between the moving parts of machine.
Explanation:
According to the law of conservation of energy, the energy can neither be created nor destroyed.
Kiedy błyska blisko slyszymy krótki grzmot, kiedy daleko długi. Dlaczego ?
Answer:
it is becuase light travel faster then sound thus light come to us first
Explanation:
to dlatego, że światło podróżuje szybciej niż dźwięk, to światło dociera do nas jako pierwsze
An athlete running the velocity 3m/s due east is confronted with two trade winds. One wind travelling at 10m/s in a direction north 65degrees east and another wind travelling at 8m/s in a direction south 70degrees east. Find the resultant velocity and direction of the athlete
Answer:
v = 10.09 m / s, 8.78 North of East
Explanation:
The easiest way to solve this exercise is to decompose the velocities into a coordinate system, where the x-axis coincides with the West-East direction and the y-axis coincides with the South-North direction.
athlete's velocity v₁ₓ = 3 m / s
wind speed 2 v₂ = 10 m / s with direction 65 north of east
sin 65 = v_{2y} / v₂
cos 65 = v₂ₓ / v₂
v_{2y} = v₂ sin 65
v₂ₓ = v₂ cos 65
v_{2y} = 10 sin 65 = 9.06 m / s
v₂ₓ = 10 cos 65 = 4.23 m / s
wind speed 3 v₃ = 8 m / s with direction 70 south of east
This angle measured from the positive side of the x-axis is
θ = 360 - 70
θ = 290
sin 290 = v_{3y} / v₃
cos 290 = v₃ₓ / v₃
v_{3y} = v₃ sin 290
v₃ₓ = v₃ cos 290
v_{3y} = 8 sin 290 = -7.52 m / s
v₃ₓ = 8 cos 290 = 2.74 m / s
now we can find each component of the velocity
X axis
vₓ = v₁ + v₂ₓ + v₃ₓ
vₓ = 3 + 4.23 + 2.74
vₓ = 9.97 m / s
Y axis
v_y = v_{2y} + v_{3y}
v_y = 9.06 - 7.52
v_y = 1.54 m / s
to find the modulus let's use the Pythagorean theorem
v = [tex]\sqrt{v_x^2 + v_y^2 }[/tex]
v = [tex]\sqrt{9.97^2 + 1.54^2}[/tex]
v = 10.09 m / s
let's use trigonometry for the direction
tan θ = v_y / vₓ
θ = tan⁻¹ v_y / vₓ
θ = tan-1 1.54 / 9/97
θ = 8.78
the address is 8.78 North of East
which of the following is incorrect for nuclear forces
a) they are attractive in nature
b) they are short range forces
c) they obey inverse square law
d) they are non conservative in nature
Answer:
c they obey inverse square law
The specific heat capacity of sea water is 4100 J/Kg°C and the boiling point of 100.6 °C. (i) Calculate the energy required to raise the temperature of 0.900 kg of this sea water from 10 °C up to its boiling point. Also mention the equation to be used. *
Answer:
334.314 (kJ)
Explanation:
1) the formula for the required energy is: Q=c*m(Bp-t), where c - 4100 J/kg*C; m - 0.9 kg; Bp - 100.6 C; t - 10 C.
2) according to the formula above:
Q=4100*0.9*(100.6-10)=41*9*906=334314 (J).
Find the magnitude and angle of a vector given the components: Bx = 7, By=-5
Answer:
[tex] |B| = \sqrt{ {B _{x} }^{2} + {B _{y} }^{2} } \\ = \sqrt{ {7}^{2} + {5}^{2} } \\ = \sqrt{74} \\ = 8.6[/tex]
[tex]let \: the \: angle \: be \: \theta \\ \tan(\theta) = \frac{B _{y} }{B _{x} } \\ \tan( \theta) = \frac{ - 5}{7} \\ \theta = { \tan }^{ - 1} ( \frac{ - 5}{7} ) \\ = 35.5 \degree[/tex]
2. Two charges at fixed locations produce an electric field as shown
below. If point charge. Y. is negative, which direction will it travel?
Answer:
sum of the two forces as both point to the right is a force that points to the right,
Explanation:
The force on the cast load at point Y is given by
F = q_y E
force is a vector magnitude so its result is
∑ F = Fₐ + F_b
indicate that the charge at y is negative, we analyze the direction of the force created by each charge
Charge A
as the electric field is incoming the charge is negative and as the test charge is negative both repel each other, consequently the force points to the right
Charge B
in this case the electric field lines are salient, therefore the charge is positive, consequently the force on the charge at y is attractive and points to the right
the sum of the two forces as both point to the right is a force that points to the right, that is, in the direction of the charge located at B
50N force accelerated a body at a rateof 8 metres per second square. Calculate the mass of the body
Answer:
m=6.25kg
Explanation:
Force= mass × acceleration
50=m×8
make m subject of the formula...
m=50/8
m=6.25kg
Answer:
[tex]\boxed {\boxed {\sf 6.25 \ kilograms}}[/tex]
Explanation:
According to Newton's Second Law of Motion, force is the product of mass and acceleration.
[tex]F= m \times a[/tex]
We know the force is 50 Newtons and the acceleration is 8 meters per second squared. Let's convert the units to make the problem and unit cancellation easier.
1 Newton is equal to 1 kilogram meter per square second (1 kg*m/s²), so the force of 50 N is equal to 50 kg*m/s².
Now we know 2 values:
F= 50 kg*m/s²a= 8 m/s²Substitute the values into the formula.
[tex]50 \ kg *m/s^2= m \times 8 \ m/s^2[/tex]
Since we are solving for the mass, we must isolate the variable, m. It is being multiplied by 8 meters per square second and the inverse of multiplication is division. Divide both sides by 8 m/s².
[tex]\frac {50 \ kg *m/s^2}{8 \ m/s^2}= \frac{m \times 8 \ m/s^2}{8 \ m/s^2}[/tex]
[tex]\frac {50 \ kg *m/s^2}{8 \ m/s^2}= m[/tex]
The units of meters per square second (m/s²) cancel.
[tex]\frac {50 \ kg }{8 }=m[/tex]
[tex]6.25 \ kg =m[/tex]
The mass is 6.25 kilograms.
In a wire, when elongation is 4 cm energy stored is E. if it is stretched by 4 cm, then what amount of elastic potential energy will be stored in it?
4E
Explanation:The elastic potential energy of an elastic material (e.g a spring, a wire), is the energy stored when the material is stretched or compressed. It is given by
U = [tex]\frac{1}{2}kx^2[/tex] --------------------(i)
Where;
U = potential energy stored
k = spring constant of the material
x = elongation (extension or compression of the material).
From the first statement;
when elongation (x) is 4cm, energy stored (U) is E
Substitute these values into equation (i) as follows;
E = [tex]\frac{1}{2}k(4)^2[/tex]
E = 8k
Make k subject of the formula
k = [tex]\frac{E}{8}[/tex] [measured in J/cm]
From the second statement;
It is stretched by 4cm.
This means that total elongation will be 4cm + 4cm = 8cm.
The potential energy stored will be found by substituting the value of x = 8cm and k = [tex]\frac{E}{8}[/tex] into equation (i) as follows;
U = [tex]\frac{1}{2}\frac{E}{8} (8)^2[/tex]
U = [tex]\frac{1}{2}{8E}[/tex]
U = [tex]{4E}[/tex]
Therefore, the potential energy stored will now be 4 times the original one.
A rocket of mass M when empty carries a mass M of fuel. The rocket and fuel travel at speed v.
The engine of the rocket is fired and all of the fuel is expelled. The speed of the rocket increases
to 2v.
What happens to the kinetic energy of the rocket?
A It doubles.
B It halves.
C It increases by a factor of four.
D It stays the same.
The kinetic energy of the rocket should be A. it doubles.
What is kinetic energy?Kinetic energy represents the energy where an object or a particle should be the reason for its motion. It transfers energy than it should be done on an object by applying a net force, so the object speeds up and thereby gains kinetic energy. In the case when the speed increased to 2v so the kinetic energy should also doubles.
Learn more about speed here: https://brainly.com/question/17052831