Antimony
Hope it helps
Answer:
[tex]\boxed {\boxed {\sf 1. \ Antimony}}[/tex]
Explanation:
A metalloid is an element that is "in between" a metal and non-metal. They display some properties of both.
On the Periodic Table, the metalloids are found in a zig-zag step pattern to the right of the metals and the left of the non-metals.
There are 7 metalloids: boron, silicon, germanium, arsenic, antimony, tellurium, and polonium.
So, the correct answer is 1. Antimony
Describe in your own words how the earth's layers were formed.
The layers of the earth were formed due to the sediments that significantly flattens out beside the center of the earth. After a long duration, a new layer is spread over the older layer, and so on.
What are the different layers of the earth?The different layers of the earth are as follows:
The Inner Core: This is the first layer from the center of the earth. The Outer Core: It is found after the inner core. The Mantle: It is the middle layer of the earth. The Crust: It is the outermost layer of the earth.The above-mentioned layers of the earth were formed with the impact of the building blocks of the earth that are remarkably known as Planetesimals, collided, and collapsed.
During that time, the hardest elements like nickel, iron, etc. constitute the core while the lighter elements like carbon, oxygen, silicon, etc. play an essential role in the formation of crust and mantle.
Therefore, the layers of the earth were formed due to the sediments that significantly flattens out beside the center of the earth.
To learn more about The layers of the earth, refer to the link:
https://brainly.com/question/10430823
#SPJ2
answer the question
what is the needed electrons for CLO3-
What will the core contain
compare the two types of optical telescopes
Answer: Reflectors use a mirror to collect the light, whilst refractors use a lens while, Refractor telescopes require a large lens at the front to direct the incoming light to the lens.
dfgasfsadfasdfasdfasdfadsf
Answer:
fsdafdsafdsafdsafdasfsagfd
Explanation:
Please help :) —————————————
Answer:
I can't see what the picture says
What is the frequency of a photon with an energy of 3.38 x 10-19 J?
[tex]\huge\boxed{5.1x[tex]10^{14}[/tex]Hz}[/tex]
_____________________________________DATA:E = [tex]3.38 x 10^{-19}[/tex]
h = [tex]6.625x10^{-34}[/tex]
f = ?
_____________________________________SOLUTION:Energy of Photon is given by,
E = hf
Rearrange the equation,
f = [tex]\frac{E}{h}[/tex]
where,
E = energy
h = planck's constant
f = frequency
------------------------------------------------------------------------------------------------------------
Substitute the variable in the equation,
f = [tex]\frac{3.38x10^{-19}}{6.62x10^{-34}}[/tex]
Simplify the equation,
f = 5.10 x 10^14 Hz
_____________________________________Best Regards,'Borz'
Answer:
b. 5.10 x 10^14 Hz
Explanation:
is water wet yes or no
Answer:
no water isn't wet.
Explanation:
Water isn't wet by itself, but it makes other materials wet when it sticks to the surface of them
Arrange the following in order of increasing atomic radius: Mg, Na, P, Si, and Ar.
Answer:
Ar, P, Si, Mg, Na
Explanation:
Ar=106pm
P=107pm
Si=111pm
Mg=141pm
Na=166pm
Na>Mg>Si>P>Ar is the order of increasing atomic radius.
What are elements?Elements are the simplest substances which cannot be broken down using chemical methods.
Atomic radii vary in a predictable way along or across the periodic table. The atomic radius increases from top to bottom in a group, and decreases from left to right across a period. Thus we can say that helium is the smallest element, and francium is the largest.
Ar=106pm
P=107pm
Si=111pm
Mg=141pm
Na=166pm
Hence, Na>Mg>Si>P>Ar is the order of increasing atomic radius.
Learn more about elements here:
brainly.com/question/1896898
#SPJ2
what happens to the temperatures when we have direct sunlight vs indirect sunlight?
Explanation:
When we have direct sunlight, the temperature is higher compared to indirect sunlight.
Direct sunlight is usually overhead whereas indirect sunlight is at an angle to the surface.
Direct sunlight impacts the surface with more energy concentrated on a smaller surface area. This warms the surface more. Indirect sunlight is diffuse and spreads over a wider area. This leads to a reduction in temperature.please help me..........
Answer:
4/6
6/9
8/12
Explanation:
What is Jadi? is it goat? what language is Jadi?
What element is represented in this model of the atomic number is 3
This is science
Answer:
lithium because it has an atomic number of three(you could have just googled which element has the atomic number 3)
Need help please ! if someone can answer any of these that would be great !!
Answer:
NH4 ClBa Br2Al4 C3Na2 OK3 PO4Ca F2Li3 NBa CO3Al2 (SO4)3Mg (NO3)2Li2 SNa2 SO4Ca (HCO3)2Ag CH3 COOZn (OH)2Explanation:
Here are all of them- your picture had #1-13, but here's #1-15!Please help me it would be amazing if you can?
(NUMBER 9)
Answer:
3) Warm Temperature and High Pressure
Explanation:
I explained this in your other question ;)
Answer:
Warm temp and high pressure
Explanation:
I WILLL GIVE YOU BRAINLYESTTT PLEASE HELPPPP
Answer:
10.99s
Explanation:
Given parameters:
Speed of the fly = 9.1m/s
Distance flown = 100m
Unknown:
Time taken to fly this distance = ?
Solution:
Speed is distance divided by the time;
Mathematically;
Speed = [tex]\frac{distance}{time}[/tex]
Time = [tex]\frac{distance}{speed }[/tex]
Insert the parameters and solve;
Time = [tex]\frac{100}{9.1}[/tex] = 10.99s
What is the total number of grams of a 32-gram sample of 32P remaining after 71.5 days of decay?
Answer:
1 g
Explanation:
The following data were obtained from the question:
Original amount (N₀) = 32 g
Time (t) = 71.5 days
Half-life of phosphorus (t½) = 14.3 days
Amount remaining (N) =?
Next, we shall determine the rate of disintegration. This can be obtained as follow:
Half-life of phosphorus (t½) = 14.3 days
Decay constant (K) =?
K = 0.693 / t½
K = 0.693 / 14.3
K = 0.0485 /day
Finally, we shall determine the amount remaining as illustrated below:
Original amount (N₀) = 32 g
Time (t) = 71.5 days
Decay constant (K) = 0.0485 /day
Amount remaining (N) =?
Log (N₀/N) = Kt/2.303
Log (32/N) = 0.0485 × 71.5 / 2.303
Log (32/N) = 3.46775 / 2.303
Log (32/N) = 1.5058
Take the antilog of 1.5058
32/N = antilog (1.5058)
32/N = 32.05
Cross multiply
32 = N × 32.05
Divide both side by 32.05
N = 32 / 32.05
N = 0.998 ≈ 1 g
Thus, the amount remaining after 71.5 days is approximately 1 g.
The half-life of a radioactive substance refers to the time taken for the substance to Decay to half of its initial size. Hence, the mass of the substance left after 71.5 days is 1 gram.
Initial mass = 32 g Half life = 14.3 daysAfter 14.3 days ;
32 / 2 = 16 gramsAfter 14.3 × 2 = 28.6 days :
16/2 = 8 gramsAfter 14.3 × 3 days = 42.9 days :
8 / 2 = 4 gramsAfter 14.3 × 4 days = 57.2 days :
4 /2 = 2 gramsAfter 14.3 × 5 days = 71.5 days :
2 /2 = 1 gram.Hence, the mass of the sample left after 71.5 days would be 1 gram.
Learn more : https://brainly.com/question/18766174
An animal cell placed in a hypertonic solution will shrink in a process called crenation. An animal cell placed in a hypotonic solution will swell and potentially burst in a process called hemolysis. To prevent crenation or hemolysis, an animal cell must be placed in an isotonic solution such as 0.9% (m/v) NaCl or 5.0% (m/v) glucose. This does not mean that a cell has a 5.0% (m/v) glucose concentration; it just means that 5.0% (m/v) glucose will exert the same osmotic pressure as the solution inside the cell, which contains several different solutes. A red blood cell is placed into each of the following solutions. Indicate whether crenation, hemolysis, or neither will occur.
Solution A: 3.21% (m/v) NaCl
Solution B: 1.65% (m/v) glucose
Solution C: distilled H2O
Solution D: 6.97% (m/v) glucose
Solution E: 5.0% (m/v) glucose and 0.9%(m/v) NaCl
Drag each solution to the appropriate bin.
Answer:
Solution A: 3.21% (m/v) NaCl ⇒ CRENATION
Solution B: 1.65% (m/v) glucose ⇒ HEMOLYSIS
Solution C: distilled H₂O ⇒ HEMOLYSIS
Solution D: 6.97% (m/v) glucose ⇒ CRENATION
Solution E: 5.0% (m/v) glucose and 0.9%(m/v) NaCl ⇒ CRENATION
Explanation:
Isotonic solution = 0.9% (m/v) NaCl or 5.0% (m/v) glucose
Crenation will occur if the solution has a concentration higher than 0.9% (m/v) NaCl or 5.0% (m/v) glucose (hypertonic solution). This will occur in the following solutions:
Solution A: 3.21% (m/v) NaCl > 0.9% (m/v) NaCl
Solution D: 6.97% (m/v) glucose > 5.0% (m/v) glucose
Solution E: 5.0% (m/v) glucose and 0.9%(m/v) NaCl (the addition of the 2 components exceeds the osmotic pressure permitted).
Hemolysis will occur if the solution has a concentration lower than 0.9% (m/v) NaCl or 5.0% (m/v) glucose (hypotonic solution). This is the case of:
Solution B: 1.65% (m/v) glucose < 5.0% (m/v) glucose
Solution C: distilled H₂O = 0% glucose/0% NaCl < 0.9% (m/v) NaCl or 5.0% (m/v) glucose
H2O is polar covalent or its Hydrogen bond??? PLEASE HELP!!!
Answer:
Polar covalent.
Explanation:
The covalent bonds are therefore polar, and the oxygen atoms have a slight negative charge (from the presence extra electron share), while the hydrogens are slightly positive (from the extra un-neutralized protons). Opposite charges attract one another.
when is the energy source used to fuel photosynthesis
Answer:
Photosynthesis, process by which green plants and certain other organisms use the energy of light to convert carbon dioxide and water into the simple sugar glucose. In so doing, photosynthesis provides the basic energy source for virtually all organisms.
Explanation:
What’s the answer????
Answer:
Greater
Greater
Explanation:
The amplitude of a wave is the height of the wave or the vertical displacement of the wave motion. We determine a wave amplitude usually by looking at the graph of the wave.
Amplitude is directly proportional to the energy of a wave. The higher the amplitude of a wave, the more its energy.
Frequency is the number of waves that passes a point at a particular instance of time. It is also directly proportional to the energy carried by a wave. The higher the frequency of a wave, the greater its energy.
Hey guys
What is ionic bond and how do we get it???
Please quik helpp
Answer:
Ionic bond, also called electrovalent bond, type of linkage formed from the electrostatic attraction between oppositely charged ions in a chemical compound. Such a bond forms when the valence (outermost) electrons of one atom are transferred permanently to another atom.
Explanation:
Which of these statements is false?
•Protons have a positive charge.
•Electrons have the same mass as a proton but have the opposite charge.
•The neutron is found in the nucleus of an atom.
•The nucleus of an atom is positively charged.
Answer:
the nucleus of an atom is positivley charged
Explanation:
Helpppppp i hate chemistry
I will give brainiest who helps me with the correct answer
I promise
5. Name the compound which contain Strontium, Fluorine, and Oxygen.
Options:
Strontium fluorate
Strontium fluoride
Strontium chlorate
Strontium fluorine
PLZ HELP ME ANSWER THIS!!!
Answer:
Water
Explanation:
water or oxygen is probably your answer
What is evidence that a chemical change has happened?
O A. The temperature of a substance increases or decreases.
B. The amount of matter increases.
C. A substance changes into a new kind of substance.
O D. You observe a color change.
ehat coefficient would go in the box
Answer:
1.nhl
Explanation:
Is the equation balanced or unbalanced?
Explanation:
The equation is balanced
How does energy
change from
potential to
kinetic?
Answer:
An object has potential energy, stored energy, when it is not in motion. Once a force has been applied or it begins to move the potential energy changes to kinetic energy, or motion energy.
Good luck, hope this helped!
How would the calculated concentration of the hci be affected if the sodium hydroxide were poured from ma beaker that contained some water before the naoh were added to it
Answer:
This question is incomplete
Explanation:
This question is incomplete. However, the beaker that contained some water before NaOH were added means that the resulting solution in that beaker will be more dilute. When this diluted sodium hydroxide solution is added to HCl (not hci), the reaction below occurs
HCl + NaOH ⇒ NaCl + H₂O
The reaction above is a neutralization reaction. The concentration of the acid (HCl) will reduce when a base (sodium hydroxide) is added and will also reduce more because of the presence of more water (in the base) which normally reduces the concentration of ions present in an acid or a base to become more dilute.