If the theoretical yield of a reaction was calculated to be 39.2 grams and when the experiment was conducted the amount produced was 12.7 grams, the what is the percent yield of the experiment?

Answers

Answer 1

Answer:

32.4%

Explanation:

%Yield = Actual Yield/Theoretical Yield x 100% = (12.7/39.2)100% = 32.4%


Related Questions

A chemist prepares a solution of silver (I) perchlorate (AgCIO4) by measuring out 134.g of silver (I) perchlorate into a 50.ml volumetric flask and filling the flask to the mark with water. calculate the concentration in mol/L of the silver (I) perchlorate soluation

Answers

Answer:

13 M

Explanation:

Molar mass of AgCIO4 = 207 g/mol

Number of moles of AgCIO4= 134/207= 0.65 moles

Number of moles= concentration × volume

Concentration = number of moles/volume

Concentration = 0.65 × 1000/50 = 13 M

When fat comes in contact with sodium hydroxide, it produces soap and glycerin. Determine whether this is a physical change or a chemical change. Explain your

Answers

Answer:

It is a chemical change

Explanation:

The combination of sodium hydroxide and fat yields soap and glycerine.

We have to remember that one of the characteristics of a chemical change is that new substance(es) is/are formed. We have to look out for this when considering any process.

We can see here that new substances were formed (soap and glycerine). Based on this, we can assert that a chemical change has taken place.

[2071]State and explain Kohlrusch's law.
(2071]Why does the specific conductance decreases and equivalent conductance increase
with dilution of a solution of electrolyte?
ito unit How does it Vary with dilution?
1101​

Answers

I have no idea how about it lol I t

Explain how you could use displacement reactions to distinguish between
iron and zinc. You may use any solutions
you
choose.

Answers

Answer:

A double displacement reaction is a type of reaction in which two reactants exchange ions to form two new compounds. Double displacement reactions typically result in the formation of a product that is a precipitate.

Explanation:

zinc is more reactive than iron because it displace iron from its solution

How many units are in 1.54 moles?

Answers

Answer:

Every mole contains 6.022 x 10^23 atoms regardless of what type of moelcules it is (Gold, Silver). So the anwer is 1.54 times 6.022 x 10^2

Which of the following is one stage of the cell cycle?
A. Cytokinesis
B. Multiplication
C. Photosynthesis
D. Respiration

Answers

Answer: A

Explanation: cytokinesis is in the M phase.... Mitosis is followed by cytokinesis (cell separation)

Answer:

A. Cytokinesis

Explanation:

B. doesn't make sense it's for math

C. Is for plants not cells

D. is the action of breathing

So, A is the most likely answer.

Hope I helped!

An increase in aurora activity on Earth could be related to what activity on the Sun?
O A decrease in prominence
B decrease in solar Fares
Oc decrease in speed of solar wind
D increase in speed of solar wind
E increase in sun spots

Answers

Answer:

D.

Explanation:

INCREASE OF SOLAR WINDS When the sun is more active

Bowling with a volleyball instead of a bowling ball. Will this make it easier or harder to knock over pins?

Answers

Answer:

Definitely harder, since volleyballs are nowhere near as heavy as bowling balls, it’ll be harder too since there wont be much force to knock over pins

Leopard seals are animals adapted to survive in the freezing conditions of Antarctica. Individual leopard seals vary in their different traits.
Which of the following variations would give a leopard seal the greatest chance of surviving in its harsh environment?
A. More spots on its coat. B. Thicker layer of blubber
C. More elongated head
D. Wider, flatter teeth

Answers

Answer:

B. Thicker layer of blubber

Explanation:

For the leopard seals to survives this harsh environment, it must have a thicker layer of blubber

Blubber is a thick layer of fat. It is called the adipose tissues and found in most marine organisms.

This layer helps in insulating the body against heat loss. By so doing, the animal is able to conserve internal heat. They have low thermal conductivity and do not easily lose heat or gain heat as such.

Answer:

B

Explanation:

An isotope of cesium (cesium-137) has a half-life of 30 years. If 1.0 g of cesium-137 disintegrates over a period of 90 years, how many g of cesium-137 would remain?​

Answers

Answer:

3 half-lives 7. An isotope of Cesium (Cesium-137) has a half life of 30 years. If 1.0 mg of cesium-137 disintegrates over a period of 90 years, how many mg of cesium-137 would remain? of sodium-25 is 60 seconds? : 3 minutes t=601 = 3 half-lives 5.0mg ~ 2.5 mg + 1.25mg →) 625 mg.

Explanation:

Hope this helps

To find the mass in grams of Cesium that would remain after disintegration, we would be applying the formula:

N(t) = [tex]N_{0} (\frac{1}{2})^{\frac{t}{t{\frac{1}{2} } }[/tex]

       where:

      [tex]N_{0}[/tex] = Initial quantity of the sample = 1.0g

       t = time in years of disintegration = 90 years

      [tex]t\frac{1}{2}[/tex] = Half life of cesium isotope = 30 years

      N(t) = Quantity of substance after disintegration = ?

Solving for N(t)

N(t) =  [tex]1 ( \frac{1}{2})^ \frac{90}{30}[/tex]

N(t) =  [tex]1 (\frac{1}{2})^{3}[/tex]

N(t) = 0.125 grams

Therefore, the quantity of cesium-137 that would remain after disintegrating over a period of 90 years is 0.125 grams.

To learn more, visit the link below:

https://brainly.com/question/22608626

What do u notice about the molecules before and after the chemical reaction

Answers

Explanation:

In a chemical reaction, the atoms and molecules produced by the reaction are called products.

In a chemical reaction, only the atoms present in the reactants can end up in the products. No new atoms are created, and no atoms are destroyed.

In a chemical reaction, reactants contact each other, bonds between atoms in the reactants are broken, and atoms rearrange and form new bonds to make the products.

Which element is more reactive in water?

-Na

-Mg

Answers

Answer:

sodium

Explanation:

sodium is the second most reactive. Magnesium being the least reactive

Answer:

cesium

Elements with the Highest Reactivity

Francium is radioactive, with no stable isotopes. The most chemically reactive metal with a stable isotope is cesium. Cesium reacts explosively with water

Explanation:

Each graph below represents a different type of electromagnetic wave. Which graph most likely illustrates radio waves?

Answers

Answer: the answer is c

Explanation:

I just did the test

Each graph below represents a different type of electromagnetic wave. Then graph C most likely illustrates radio waves.

What is electromagnetic wave ?

The electromagnetic field's waves, which travel through space and convey electromagnetic radiant energy, are what make up electromagnetic radiation. It consists of X-rays, gamma rays, microwaves, infrared, light, and radio waves. These waves are all a component of the electromagnetic spectrum.

There are seven different kinds of them are X-rays, gamma rays, visible light, infrared light, radio waves, and microwaves. They may be compared to seven distinct types of light.

Lower frequency electromagnetic radiation than microwaves is referred to be a radio wave. Radio waves have wavelengths that range from tens of thousands of meters to 30 centimeters. These are equivalent to frequencies between 3 Hz and 1 GHz (109 Hz).

Thus, option C is correct.

To learn more about electromagnetic wave follow the link;

https://brainly.com/question/3101711

#SPJ2

ways of expressing a solution​

Answers

Answer:

There are several ways of expressing the concentration of a solution.

Explanation:

Concentration is the proportion of a substance in a mixture. There are several ways of expressing them, each with their own usefulness. What's incredibly useful is with a little math and conversion factors, these can all be interconverted.

Molarity (M) - amount (mol) of solute / volume (L) of solutionPros: Very common in labs, makes conversions easy. Cons: Effected by temperature (liquid expands with heat so unit volume of hot solution has less solute than cold solution) and mixing (volumes are not always additive (for instance, 50 mL of water and 50 mL of ethanol is not exactly 100 mL of mixture due to solvent-solvent interactions).Molality (m) - amount (mol) of solute / mass (kg) of solventPros: Preferred when temperature and density could change; molal is based on masses, not volume so molality does not change with temperature. Masses, unlike volumes sometimes, are always additive.Cons: When dealing with moles in reactions conversions are harder.Parts by mass a.k.a mass % (% w/w) - mass of solute / mass of solutionPros: Good indication of how pure a substance is; and good for very small concentrations such as toxin or pollutant levels in a biological or environmental setting, respectively.Cons: Not the most useful for reaction stoichiometry.Parts by volume a.k.a volume % (%v/v) - volume of solute / volume of solutionPros: Very good and common for measuring main ingredients in things, such as alcohol in hand sanitizer, hydrogen peroxide in those brown bottles you see, and how much alcohol in wine bottles.Cons: Again, not the easiest to use for reaction stoichiometry.Mole fraction (X) - amount (mol) of solute/ amount (mol) of solute + amount (mol) of solvent Pros: N/ACons: N/AMass per volume percentage - mass of solute / volume of solutionPros: Common for measuring main ingredients in medicine, such as how much of it is in an aqueous solution (example: benzocaine)Cons: Difficult to use with stoichiometry.Parts per million and parts per billion (ppm or ppb) - mass of substance  / mass of sample * 10^6 or 10^9Pros: Excellent for expressing concentrations of very trace components such as a toxin or pollutant in blood, for example. Cons: Not very useful for large quantities of things.

Note: to find the percent of some of these, such as for mass percent or volume percent, multiply the result by 100.

Additionally, with some practice you can answer a question such as, "The label on a 0.750-L bottle of Italian chianti says "11.5% alcohol by volume." How many liters of alcohol does the wine contain?". etc...

I really hope this helps! Take care.


4NaOH + 4HCI - NaCl + H20

Answers

Answer:

NaOH + HCl —> NaCl + H₂O

Explanation:

From the question given above, we obtained the following equation:

4NaOH + 4HCl —> NaCl + H₂O

The equation can be balance as follow:

4NaOH + 4HCl —> NaCl + H₂O

There are 4 atoms of Na on the left side and 1 atom on the right side. It can be balance by putting 4 in front of NaCl as shown below:

4NaOH + 4HCl —> 4NaCl + H₂O

There are a total of 8 atoms of H on the left side and 2 atoms on the right side. It can be balance by putting 4 in front of H₂O as shown below:

4NaOH + 4HCl —> 4NaCl + 4H₂O

Next, divide through by 4 to express the equation with the lowest coefficients.

NaOH + HCl —> NaCl + H₂O

Now the equation is balanced.

NOTE: Smallest coefficients are always used to represent a balanced equation.

I need help. Please help with the best of your ability.​

Answers

Answer:

Photosynthesis transforms light energy into chemical energy by making sugars. Cellular respiration releases the chemical energy from food by breaking down sugars.

Explanation:

I'm actually learning this in school right now

Hope this helps!

~PurpleMist

Compound is a dull white smooth solid which does not conduct electricity.

a. True
b. False

Answers

Answer:

a. True.

Explanation:

Hello!

In this case, since dullness and smoothness are characteristic of materials that are not able to conduct the electricity, as they do not provide an appropriate pathway for the electrons to move around because of their amorphous structure, we realize the answer is a. True.

On the contrary, a lustrous and robust solid, is actually able to conduct electricity because it provides the pathway for the electron movements and therefore to conduct electricity.

Best regards!

What type of weather typically results from a low pressure system?
I need help!!!!

Answers

Answer:

Storms and hurricanes can be formed with low pressure. It always results into unsettled weather.

Explanation:

Hope this helps!

How does Bromine make it's escape.

Answers

Answer:

So, when bromine comes near the ethylene pi bond, it attacks the electron and grabs it, but the second bromine steals it away and departs as Br-. After all, bromine is more electronegative than carbon; the first bromine is just a link in the chain of events that allows the second bromine to escape with an electron.

Tim and Jose are moving furniture. Tim pushes a 150 kg sofa with 300N
force. As a result, Sofa’s acceleration was __________ according to Newton’s
Second Law of motion. (F = ma)

Answers

Answer:

a = 2m/s²

Explanation:

Given data:

Mass of sofa = 150 Kg

Force applied = 300 N

Acceleration = ?

Solution:

Formula:

F = ma

F = force

m = mass

a = acceleration

by putting values,

300 N = 150 Kg × a

a =  300 N /150 Kg

a = 300 Kg m/s² / 150 Kg   ( N = Kgm/s²)

a = 2m/s²

6
The volume of a gas increased from 2 to 6 L while the temperature was held constant. The
pressure of the gas:
increased by a factor of 3
decreased by a factor of 3
increased by a factor of 4
decreased by a factor of 4

Answers

Answer:

If the volume of a gas increased from 2 to 6 L while the temperature was held constant, the  pressure of the gas decreased by a factor of 3.

Explanation:

Boyle's law that says "The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure." This means that if the pressure increases, the volume decreases, while if the pressure decreases, the volume increases.

Boyle's law is expressed mathematically as:

Pressure * Volume = constant

or

P * V = k

To obtain the proportionality factor k you must make the quotient:

[tex]k=\frac{V2}{V1} =\frac{6 L}{2 L}[/tex]

k= 3

This means that if the volume of a gas increased from 2 to 6 L while the temperature was held constant, the  pressure of the gas decreased by a factor of 3.

Select the correct balanced equation for the combustion of methane.
CH4 + 02 -> CO 2 + H2O

Answers

Answer:

A: CH4 + 2O2 -> CO2 + 2H2O

Explanation:

CH4 + O2 -> CO2 + H2O

Count how many elements they are in all molecules for the reactants and for the products.

For the reactants:

C = 1 element

H = 4 elements

O = 2 elements

For the products:

C = 1 element

O = 2 elements

H = 2 elements

O = 1 element

2 oxygen atoms + 1 oxygen atoms = 3 oxygen atoms total on the products side.

To balance this equation, we need to add 2 more elements of hydrogen and 2 more elements of oxygen. Therefore, we add a 2 to the coefficient of O2 for the reactants side and add a 2 to the coefficient of H2O for the products side.

Now let us try it.

CH4 + 2O2 -> CO2 + 2H2O

Count how many elements they are in all molecules for the reactants and products.

For the reactants:

C = 1 element

H = 4 elements

O = 4 elements

For the products:

C = 1 element

O = 2 elements

H = 4 elements

O = 2 elements

2 oxygen atoms + 2 oxygen atoms = 4 oxygen atoms total on the products.

All of the elements are balanced.

So the final answer is A: CH4 + 2O2 -> CO2 + 2H2O

Hope it helped!

What type of air mass is usually associated with hurricanes?

Answers

Answer:

Hurricanes conditions occur when warm, moist air evaporates from the surface of the ocean and rises quickly. This warm air meets cool air in the higher elevations that causes condensation of the warm air vapor. The condensation turns into storm clouds that make up hurricanes.

Select the correct balanced equation for the double displacement reaction of calcium carbonate and hydrochloric
acid (Rolaids and stomach acid)
CaCO3 + HCL -> CaCl2 + H2CO3

Answers

Answer:

B: CaCO3 + 2HCl -> CaCl2 + H2CO3

Explanation:

CaCO3 + HCl -> CaCl2 + H2CO3

Count how many elements they are in all molecules for the reactants and for the products.

For the reactants:

Ca = 1 element

C = 1 element

O = 3 elements

H = 1 element

Cl = 1 element

For the products:

Ca = 1 element

Cl = 2 elements

H = 2 elements

C = 1 element

O = 3 elements

To balance this equation, we need to add 1 more element of Chlorine and Hydrogen.  Therefore, we add a 2 to the coefficient of HCl for the reactants side.

Now let us try it.

CaCO3 + 2HCl -> CaCl2 + H2CO3

Count how many elements they are in all molecules for the reactants and products.

For the reactants:

Ca = 1 element

C = 1 element

O = 3 elements

H = 2 element

Cl = 2 element

For the products:

Ca = 1 element

Cl = 2 elements

H = 2 elements

C = 1 element

O = 3 elements

All of the elements are balanced.

So the final answer is B: CaCO3 + 2HCl -> CaCl2 + H2CO3

Hope it helped!

which toxic gas is released in incomplete combustion?

Answers

Answer:

Incomplete combustion produces carbon monoxide (CO), a toxic gas.

Explanation:

Combustion is the rapid chemical reaction of oxygen in the air or direct oxygen, which is defined as oxidizer, with the different elements that make up the fuel (mainly carbon (C) and hydrogen (H)). These chemical reactions release energy producing local increases in temperature, which causes a flow of heat to the outside.

In other words, on the one hand you have the fuel, which is the substance that oxidizes and that you can find in a solid, liquid or gaseous state and which is made up mostly of carbon and hydrogen.

The oxidizer, for its part, is the substance that oxidizes the fuel, and it is generally the oxygen found in the air.

Certain amounts of oxidizer and fuel must come into contact for combustion to occur.

Incomplete combustion occurs when part of the fuel does not fully react. Incomplete combustion produces carbon monoxide (CO), a toxic gas.

Ramelteon is a hypnotic agent used in the treatment of insomnia: Considering the labeled drawing above, which of the highlighted atoms has a delocalized lone pair? Select all that apply. 1 2 3 Identify the geometry of each atom (except for hydrogen atoms). All sp2-hybridized carbon atoms have geometry. All sp3-hybridized carbon atoms have geometry. The nitrogen atom has geometry. The oxygen atom of the C=O bond has geometry, and the other oxygen atom has geometry.

Answers

Answer:

1 and 2

Trigonal planar

Tetrahedral

Trigonal Planar

Linear

Bent ( v- shape)

Explanation:

The highlighted atoms has a delocalized lone pair - 1 and 2

All sp2-hybridized carbon atoms have geometry- Trigonal planar

All sp3-hybridized carbon atoms have geometry - Tetrahedral

The nitrogen atom has geometry - Trigonal Planar

The oxygen atom of the C=O bond has geometry - Linear

and the other oxygen atom has geometry - Bent ( v- shape)

P.S - The correct question is -

Ramelteon has been an aromatic compound with 3 ring structure followed by the aliphatic chain.

The drug has antagonist structure to the melatonin and has been used to treat insomnia by acting as the melatonin representative.

Geometry in the structure

The labelled atom in the structure is oxygen of the pentane ring, nitrogen in the aliphatic chain, and carbonyl oxygen.

The delocalized lone pair has been observed in the compound which has been contributing to the resonating structure. The delocalized lone pair ion the given structure is oxygen of the pentane ring, and nitrogen in the aliphatic chain.

The geometry of the atom has been based on the hybridization and the lone pairs.

The geometry of [tex]\rm sp^2[/tex] hybridized carbon has been trigonal planar. The geometry of [tex]\rm sp^3[/tex] hybridized carbon atom has been tetrahedral. The nitrogen in the chain has trigonal planar geometry. The C=O oxygen has been comprising  linear geometry, while the oxygen has bent v shape.

Learn more about hybridization, here:

https://brainly.com/question/13978941

what is the simplified chemical équation for Vinegar diluted in water?​

Answers

[tex]\purple{\tt{\huge{Answer}}}[/tex]

CH3COOH is an accepted and common form of writing the structure of acetic acid (commonly known as vinegar when diluted in water).

Suppose that for a hypothetical reaction: A2(g) + 3B2(g) 2AB3(g) It is determined that at a certain temperature the equilibrium concentrations are [A2] = 0.0055, [B2] = 0.763 and [AB3] = 7.6×10-4. Calculate the numerical value of K for the reaction.

Answers

Answer:

The numerical value of K for the reaction is 2.36*10⁻⁴

Explanation:

A chemical equilibrium is a reaction that is never completed, since it occurs simultaneously in both directions (the reactants form products, and in turn, these form reactants again). In other words, it is a dynamic balance. When the concentrations of each of the substances involved (reactants or products) stabilize, that is, they are spent at the same rate as they are formed, chemical equilibrium is reached.

The equilibrium constant (Kc) is expressed as the ratio between the molar concentrations of reactants and products. Its value in a chemical reaction depends on the temperature, so this must always be specified.

Being:

aA + bB ⇄ cC + dD

then the constant Kc is:

[tex]Kc=\frac{[C]^{c} *[D]^{d} }{[A]^{a} *[B]^{b} }[/tex]

In the case of the reaction:

A₂(g) + 3 B₂(g) ⇒ 2 AB₃(g)

The constant Kc is:

[tex]Kc=\frac{[AB_{3} ]^{2} }{[A_{2} ] *[B_{2} ]^{3} }[/tex]

Being:

[AB₃]=7.6*10⁻⁴[A₂]= 0.0055[B₂]= 0.763

and replacing, you get:

[tex]Kc=\frac{(7.6*10^{-4} )^{2} }{0.0055 *(0.763)^{3} }[/tex]

Kc=2.36*10⁻⁴

The numerical value of K for the reaction is 2.36*10⁻⁴

1)
If I have 45 liters of helium in a balloon at 25°C and increase the
temperature of the balloon to 55° C, what will the new volume of the
balloon be?

Answers

Answer:

52.8 Liters

Explanation:

Gay-Lussacs law states that P1/T1 = P2/T2

if:

P1 = 45T1 (in Kelvins) = 25 + 273.1 =298.1P2= ?T2 = 55 + 273.1 = 328.1

then:

45/298.1 = P2/328.1

P2 = 52.8

The new volume of the balloon is 52.8 Liters this can be calculated by using gas laws.

Charles law:

Charles law states the volume occupied by a fixed amount of gas is directly proportional to its absolute temperature. It is given by

V₁/T₁ = V₂/T₂

What information do we have?

V₁ = 45 L

T₁ = 25 + 273.1 =298.1 K

T₂ = 55 + 273.1 = 328.1 K

To find:

V₂= ?

On substituting the values:

45/298.1 = V₂/328.1

V₂ = 52.8 L

Thus, the volume of the balloon is 52.8 liters.

Find more information about Gas law here:

brainly.com/question/555495

List the following compounds in order of increasing reactivity in an SN2 reaction.
A. 2-Bromo-2-methylbutane, 1-Bromopentane, 2-Bromopentane
B. 1-Bromo-3-methylbutane, 2-Bromo-2-methylbutane, 2-Bromo-3-methylbutane
C. 1-Bromobutane, 1-Bromo-2,2-dimethylpropane, 1-Bromo-2-methylbutane, 1-Bromo-3-methylbutane

Answers

Answer:

A- 1-Bromopentane

>2-Bromopentane> 2-Bromo-2-methylbutane

B- 1-Bromo-3-methylbutane>2-Bromo-3-methylbutane> 2-Bromo-2-methylbutane

C- 1-Bromobutane > 1-Bromo-3-methylbutane>1-Bromo-2-methylbutane>1-Bromo-2,2-dimethylpropane

Explanation:

We must bear in mind that the ease of SN2 reaction is methyl > primary> secondary> tertiary.

As a result of this all primary alky halides react faster towards SN2 than secondary and tertiary alkyl halides.

Also, compounds that may form more stable carbocations by 1,2- alkyl shifts are less likely to participate in SN2 reaction

Other Questions
A 50kg person standing still in ice skates throws their helmet to the right at 25 m/s while on a frictionless surface. This gives the person a speed of 1.0m/s leftwards. What is the mass of the helmet?Consider rightward as the positive direction. What does Tao Te Ching teach? What is the significance of the Great Britain to the History and Culture of the United States? Macy Chapman - Answers to lea1 invest 4600 in a bank accountpaying2.1%compound interest. How much do I have in the accountafter 5 years? It costs $4 to enter the fair. Each ride costs $2.50. You have $21.50. How many rides can you go on? Write an equation, then solve. Which is an equation of a direct proportion 1.37x = 12.741A.14.111B.17.45517C.9.3D.11.371 What is a positive and what is a normative statement? what is a ionisation energy How to do brainliest The frequency of waves is given in O A. waves per second. O B. cycles per second. O c. nodes per second. O D. graphs. ANSWER NEEDED QUICK SHOW WORK AS WELL Solve each system using SUBSTITUTION. Remember to check! 2) y = 2x 1 y = 3x 16 HEY! HELP PLEASE, ASAP!! THANKS SO MUCH!!!! The gas tank in my car is 5/6 full . Each time I drive it to or from work I use 1/12 of a full tank of gas . Which equation represents the number of times I can drive to or from work with the gas in my tank Which democratic ideals are reflected in this passage?Check all that apply.the right to have a fair trialthe right to serve in governmentthe right to live in a free societythe right to have individual libertiesthe right to pursue dreams please help me figure out this outfit Why can Solids Support Objects Easier Than Fluids Which poetic device describes the end rhymes in this stanza from the poem "A narrow Fellow in the Grass"?The Grass divides as with a Comb,A spotted Shaft is seen,And then it closes at your FeetAnd opens further on - Find the distance between points P(6, 2) and Q(5, 9) to the nearest tenth.