Answer:
5200
Explanation:
Which unit would you use to measure the mass of a student desk?
Answer:
b and then c
thanks for the brainly points
clarify the following expression s
a.atomic number
b.mass number
c.nucleus
Answer:
Atomic number of a chemical element is the number of protons found in the nucleus of every atom of that element.
The mass number, also called atomic mass number or nucleon number, is the total number of protons and neutrons in an atomic nucleus.
The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom.
Express 749 000 000 in scientific notation,
Answer:
7.49 × 108
Explanation:
Scientific notation is a way to express numbers in a form that makes numbers that are too small or too large more convenient to write. It is commonly used in mathematics, engineering, and science, as it can help simplify arithmetic operations. In scientific notation, numbers are written as a base, b, referred to as the significant, multiplied by 10 raised to an integer exponent, n, which is referred to as the order of magnitude:
A scientist is examining a mixture of nitrogen, hydrogen, and ammonia. The individual pressures that are exerted by nitrogen and hydrogen are 0.26 atm and 0.28 atm, respectively. If the total pressure is 0.90 atm, what is the partial pressure of ammonia? Use P subscript T equals P subscript 1 plus P subscript 2 plus P subscript 3 plus ellipses plus P subscript n.. 0.27 atm 0.36 atm 0.54 atm 0.90 atm
Answer: 0.36 atm
Explanation:
According to Dalton's law, the total pressure is the sum of individual pressures.
[tex]p_{total}=p_1+p_2+p_3[/tex]
Given : [tex]p_{total}[/tex] = total pressure of gases = 0.90 atm
[tex]p_{N_2}[/tex]= partial pressure of nitrogen = 0.26 atm
[tex]p_{H_2}[/tex] = partial pressure of hydrogen = 0.28 atm
[tex]p_{NH_3}[/tex]= partial pressure of ammonia = ?
putting in the values we get:
[tex]0.90=0.26 +0.28+p_{NH_3}[/tex]
[tex]p_{NH_3}=0.36atm[/tex]
Thus the partial pressure of ammonia is 0.36 atm
Answer:
B) 0.36 atm
Explanation:
You are using a calorimeter to calculate the specific heat capacity of a metallic ore. The calorimeter contains 0.50 kilograms of water at room temperature (22 °C). We heat the ore in boiling water and then drop the metal into the calorimeter and wait for the water and metal to reach the same temperature. The mass of the ore is 3.5 kilograms. We find that the water has increased in temperature to 24.3 °C. Recall that the specific heat of water is 4.18 J/g–°C. Calculate the specific heat capacity of the ore.
In the calorimeter, the heat received is the same as the heat released
Q abs = Q release
Heat can be calculated using the formula:
Q = mc∆T
Q = heat, J
m = mass, g
c = specific heat, joules / g ° C
∆T = temperature difference, ° C / K
Q released by a metallic ore and absorbed by water at calorimeter
Q ore = Q water
Q waterm = 0.5 kg = 500 g
c = 4.18 J/g–°C.
Δt = 24.3 - 22 = 2.3
[tex]\tt Q=m.c.\Delta t\\\\Q=500\times 4.18\times 2.3=4807~J[/tex]
the specific heat capacity of the ore.Q ore = Q water = 4807 J
m ore = 3.5 kg = 3500 g
Δt = 100 - 24.3 = 75.7
[tex]\tt 4807=3500\times c\times 75.7\\\\c=0.018~J/g^oC[/tex]
An atom with the electron configuration 2-8-8-2 has an incomplete
Answer:
3rd principal energy level
Explanation:
Principle energy that explains the energy of the electrons and positions of electrons of a particular atom. There are four energy levels fist to fourth that are made of sublevels and that is made up of s, p, d and f orbitals.
First principal energy level - 2
Second principal energy level - 8
Third principal energy level - 18
Fourth principal energy level - 32
3rd energy level has 9 orbitals, which has 18 electrons
2 in the s orbital,
6 in the three p orbitals, and
10 in the five d orbitals.
So, here there are only 8 electrons in the third principal energy level.
An orange falls off of a display at a store and rolls 5 meters in 2.5 seconds. What is the average speed of the orange?
An orange falls off of a display at a store and rolls 5 meters in 2.5 seconds the average speed of the orange will be 2 meters per second.
What is speed?Speed if the rate of change of position of an object in a given time of interval or per unit time of interval and it is the ratio of distance traveled to the time taken and the unit will be meter per second.
The average speed of the orange will be if the orange falls off of a display at a store and rolls 5 meters in 2.5 seconds,
Speed = distance / time
Substituting the value,
speed =5 meters /2.5 seconds
speed = 2 meters per second.
Therefore, the average speed of the orange will be 2 meters per second if, the orange falls off of a display at a store and rolls 5 meters in 2.5 seconds.
Learn more about speed, here:
https://brainly.com/question/8011798
#SPJ2
why can dogs not eat chocolate
A large marble is dropped in a graduated cylinder with 45 mL of water in it. The water level increased to 61 mL. What is the volume of the marble?
Answer:
Volume of the marble is 16 ml.
Initial volume present in graduated cylinder=45 ml.
Final volume in graduated cylinder after marble is dropped=61 ml.
Volume of water displaced=volume displaced by marble.
Volume displaced by marble=final volume in cylinder-initial volume in cylinder
Volume displaced=61ml-45ml=16ml
So volume of marble=16ml.
Answer:
16mL
Explanation:
What is the formula for an alkene containing six carbon atoms?
A. C6H10
B. C2H6
C. C6H12
D. C5H12
Answer:
C. C₆H₁₂
Explanation:
Alkenes are the unsaturated hydrocarbons which form a homologous series with a general formula;
Cₙ H₂ₙ
n in this problem is 6
2n = 2 x 6 = 12
The formula of the compound will be C₆H₁₂
The density of cadmium is 8.65 g/mL, what is the volume of a 33.4 g object made of pure cadmium?
Answer:
Volume = 3.86 ml (Approx)
Explanation:
Given:
Density of cadmium = 8.65 g/ml
Mass of pure object = 33.4 g
Find:
Volume pure cadmium
Computation:
Volume = Mass / Density
Volume = 33.4 / 8.65
Volume = 3.86 ml (Approx)
Molecules in a liquid are:
closer together than in a gas
moving more quickly than in a solid
moving more slowly than in a gas
all of the above
Please help!!!
Answer:
all of the above
Explanation:
5. A guava with a mass of 0.200 kg has a weight of
A. 0.200 N
B. 1.96 N
C. 4.50 N
D. 10.0 N
A guava with a mass of 0.200 kg has a weight of 1.96N
HOW TO CALCULATE WEIGHT:
The weight of an object is its mass with respect to gravity. That is, the weight of an object, which is a force measured in Newton (N) can be calculated as follows:F = mass (m) × acceleration due to gravity (a)
The mass of the guava in this question is given as 0.200kg, hence, the weight is calculated as follows:F = 0.200g × 9.8m/s²
F = 1.96N
Hence, a guava with a mass of 0.200 kg has a weight of 1.96N.
Learn more: https://brainly.com/question/23312072?referrer=searchResults
Round the value 44.981
Answer: 45
Explanation: it would be 45 bc if the value is 5 and over the number goes up and if it is lower than 5 it would stay the same.
Answer:
45 is the answer
Explanation:
If the mass of the reactants in the chemical reaction was 25.3 grams, what was the mass of the products
Answer:
5
Explanation:
5
A bond between sulfur and oxygen would be what type of bond?
Answer:
Covalent Bond
Explanation:
Answer:
covalent bonding
Type of Bonding: Sulfur Dioxide is a process of covalent bonding, since Sulfur and Oxygen are both non-metals. The Sulfur is in the center surrounded by 2 Oxygen atoms. In this situation, as depicted below, Sulfur Dioxide is a resonance structure and can be expressed in three different forms
Explanation:
hope that helps
Which statement describes a molecule that has a trigonal pyramidal molecular shape?
The molecule has a trigonal planar electron domain geometry with one lone pair.
O The molecule has a tetrahedral electron domain geometry with one lone pair.
O The molecule has a trigonal planar electron domain geometry with two lone pairs.
O The molecule has a tetrahedral electron domain geometry with two lone pairs.
The statement describes a molecule that has a trigonal pyramidal molecular shape is "The molecule has a trigonal planar electron domain geometry with two lone pairs".
So, option C is correct one.
What is difference between shape and geometry of the molecule?In finding geometry of the molecule, lone pairs and bond pairs both are included but in finding shape of the molecule only bond pairs are are involve.
To learn more about trigonal pyramidal here.
https://brainly.com/question/14177468
#SPJ3
Answer:C
Explanation: Took the test
Please i need to pass this!
Please try
It is incorrect because it should have a total of eight electrons with two electrons between each H and O
Further explanationLewis structure shows the form of bonds that occur in the valence electrons of an element or compound
This bonding usually occurs in covalent bonds
Valence electrons are electrons used in a chemical bond
The main group elements usually have valence electron configurations in the ns and np subshells, While the transition elements in the subshells (n-1) d and ns.
Element O has 6 valence electrons
Element H has 1 valence electron
To achieve stability, the element O needs 2 more electrons which are obtained from 2 electrons from the H element, while the H element needs 1 electron to be stable
So that a covalent bond is formed
When your food gets digested, the macromolecules get broken down into
individual monomers. Which monomer would be most present based on your meal?
How do you know?
Which of the following characteristics is shared by both primary and secondary consumers? I need it quick it please
A. Uses the Sun's radiant energy of produce food
B.The first step in an food chain diagram
C. Eats only plants to gain needed energy
D.Gains energy by eating other living things
Answer:
Gains energy by eating other living things
The statement 'gains energy by eating other living things' is a characteristic shared by both primary and secondary consumers (Option D).
Producers (e.g. algae and plants) are autotrophic organisms that generate their own food.Primary consumers and secondary consumers are heterotrophs that need to eat other organisms to survive.Primary consumers can be, for example, herbivores, whereas secondary consumers can be carnivores.In conclusion, the statement 'gains energy by eating other living things' is a characteristic shared by both primary and secondary consumers (Option D).
Learn more in:
https://brainly.com/question/1810988
Unit: Scientific Measurement“One, Two, and More Step Problems” – Wksh #2
1.How many g are equal to 345.7 mg?
2.Change 0.00765 kL into mL.
3.How many seconds are there in 2.5 days?
4.How many minutes are there in 1.000 week?
5.How many seconds long is this chemistry class if it lasts 40.0 minutes?
6.A chemistry student’s height is measured at 68.5 inches. How tall is the student in cm?
7.This same chemistry student has a weight of 155 lbs. What is the student’s weight ingrams? (16oz=1lb, 1 oz = 28.34 g)
8.A homerun in a baseball game was measured at 450 feet. How many meters is this equalto?
9.Mount Everest is approximately 8,000 meters high. How many miles high is MountEverest?
10.A 5.0 km race is scheduled for this weekend. How many miles is this race?
Answer:
1. 0.3457g
2. 7650mL
3. 216000 seconds
4. 10080minutes
5. 2400 seconds
6. 173.99cm
7. 70283.2g
8. 137.16metres
9. 4.968miles
10. 3.105miles
Explanation:
1. 1000mg = 1g
345.7 mg = 345.7/1000
= 0.3457g
2. 1kL = 1000000mL
0.00765 kL = 0.00765 × 1000000
= 7650mL
3. 1 day = 86400s
2.5 days = 2.5 × 86400
= 216000 seconds
4. 1 week = 10080minutes
1.000weeks is equivalent to 1 week, hence there are 10080minutes in 1.000week.
5. 1minute = 60seconds
40.0minutes = 40 × 60
= 2400seconds.
6. 1 inch = 2.54cm
68.5inches = 68.5 × 2.54
= 173.99cm
7. 1Ib = 16oz
155Ibs = 155 × 16
= 2480 oz
1 oz = 28.34 g
2480oz = 2480 × 28.34
= 70283.2g
8. 1 foot = 12 inches
450 feet = 450 × 12
= 5400inches
1 inch = 0.0254metres
5400 inches = 5400 × 0.0254
137.16metres
9. 1 metre = 0.000621 mile
8000 metres = 8000 × 0.000621
= 4.968miles
10. 1 kilometers = 1000 metres
5km = 5 × 1000
= 5000metres
1 metre = 0.000621 mile
5000metres = 5000 × 0.000621
= 3.105miles
How do I put Chlorofluorocarbons in a sentence?
Answer: Here are some examples
Explanation:
1. In the southern spring, ozone is destroyed above Antarctica, mainly by manufactured compounds called chlorofluorocarbons (CFCs )
2. It is now generally accepted that the loss of stratospheric ozone is caused by chemical reactions initiated by chlorofluorocarbons.
3. Your refrigerator and other home appliances emit Chlorofluorocarbons, or CFCs, as do aerosol spray cans.
Hope this hlps!
Explanation:
To be able to put the chemical term chlorofluorocarbons in a sentence, you must first understand what the chemical species denotes.
We know chlorofluorocarbons are a group of compounds that consists of atoms of chlorine, flourine, and carbon.
Now, here are some sample sentences;
Chlorofluorocarbons are one of the leading causes of ozone depletion in the atmosphere. Most national governments are putting measures in place to check the use of chlorofluorocarbons in industrial manufacturing.If we can innovate a substitute for chlorofluorocarbons, the environment would be safer.Which non-metal have lustre in the following 1. Iodine 2. Chlorine 3. Carbon 4. Silicon
Answer:
Iodine
Explanation:
I hope this answer will help you
Answer:
silicon. ?
Explanation:
lmk if its right.
I don't understand this :c
help me please
What is the mass of an object with a density of 5.7 g/cm^3 and a volume of 48
cm^3? *
Answer:
273.6 g
Explanation:
mass =(density)(volume)
mass=(5.7g/cm^3 )(48 cm^3)
cancel out your cm^3 and your are left with grams
multiply (5.7g)(48)=273.6 g
The mass of an object with a density of 5.7 g/cm³ and a volume of 48 cm³ is 273.6 grams.
What is density?Density is defined as the degree to which a material is packed together.
It is also defined as a mass per unit volume of the substance.
Its SI unit is kilogram per cubic meter or gram per meter.
Density can be expressed as
Density = mass / volume
Mass = density x volume
As given, Density = 5.7 g/cm³
Volume = 48 cm³
So, Mass = 5.7 g/cm³ x 48 cm³
= 273.6 grams
Thus, the mass of an object with a density of 5.7 g/cm³ and a volume of 48 cm³ is 273.6 grams.
To learn more about density, refer to the link below:
https://brainly.com/question/15164682
#SPJ5
PLS ANSWER!! ASAP!! 10 POINTS!!
Which of the following properties of gold does not explain why this metal is often used in jewelry?
A. Gold is a good conductor of electricity.
B. Gold is shiny.
C. Gold is very malleable.
D. Gold is a solid.
Answer: A is the correct answer
Explanation: It conducts more electricity than almost all other metals ans gems in jewelry
can u tell me the steps to measure a straight line.. need answer immediately..
Which element has 16 protons in its nucleus?
neon
oxygen
sodium
sulfur
Answer: Sulfur
Explanation: Sulfur has 16 protons, silicon has 14 protons, and gold has 79 protons.
Answer:
d
Explanation:
What would happen if the earth did not have gravity?
Answer:
Explanation:
If the Earth's gravity is lost, all items held to the Earth's surface by gravity would float away. That includes the atmosphere, water, people, cars and animals. If an object were secured strongly to the Earth, it would probably remain attached
Answer:
Everything would be floating
which statement correctly describes protons and neutrons?
a. they have the same mass and the same electrical charge
b. they have the same mass but different electrical charge
c. they have the different masses but the same electrical charge
d. they have different masses and different electrical charges
Answer:
B
Explanation: