The diagram below shows the muzzle of a cannon located 50. meters above the ground. When the cannon is fired, a ball leaves the muzzle with an initial horizontal speed of 250. meters per second. [Neglect air resistance.]Which action would most likely increase the time of flight of a ball fired by the cannon?

Answer:

The force of kinetic friction between the block and the floor is 2.4 N

Explanation:

The given parameters are;

The weight of the block = 8 Newtons

The velocity of the block = Constant velocity

Taking the kinetic friction for wood, [tex]\mu _k[/tex] = 0.3, we have;

The normal reaction of the block on horizontal ground, N = The weight of the block = 8 N

The force of kinetic friction between , [tex]F_k[/tex] = [tex]\mu _k[/tex] × N

Therefore, we have;

The force of kinetic friction between the block and the floor, [tex]F_k[/tex] = 0.3 × 8 N = 2.4 N.

Answer:

2.0 kg

Explanation:

Answer: I believe the correct answer is A.

Answer:

[tex]\displaystyle V=7.5\ km/h[/tex]

Explanation:

Average Speed

If an object travels a distance d in a time t regardless of the direction, the average speed is the quotient of the distance over the time:

[tex]\displaystyle V=\frac{d}{t}[/tex]

It's known a person runs d=15 kilometers in t=2 hours, thus his/her average speed is:

[tex]\displaystyle V=\frac{15\ km}{2\ h}[/tex]

Calculating:

[tex]\boxed{\displaystyle V=7.5\ km/h}[/tex]

Resistance is a material's tendency to resist the flow of charge (current). Resistance is the measure of the opposition to motion of free electrons(current) due to their continuous collisions with the atom of the lattice. An electric current flows when electrons move through a conductor, such as a metal wire. The moving electrons can collide with the atoms in the metal. This makes it more difficult for the current to flow, and causes resistance. The unit of Resistance is "OHM". Ohm is denoted by the greek letter "Ω".

  If a current 'I' is caused to flow in a conductor by a battery of potential difference 'V', it is found that the current is directly proportional to potential difference provided there is no change in the conductor itself. That means more will be I if we increase V. So

                     [tex]{\Longrightarrow}\qquad \qquad \qquad I {\propto} V\\\\{\Longrightarrow}\qquad \qquad \qquad I = KV[/tex]

Where K is Conductance. Conductance is the ability of a conductor to allow the current to pass through it.  Resistance(R) is the reciprocal(opposite) of conductance(K) thus K is inversely proportional to R,

                     [tex]{\Longrightarrow}\qquad \qquad \qquad I = \frac{1}{R}V \\\\{\Longrightarrow}\qquad \qquad \qquad V = IR[/tex]

This is known as OHM's Law, and V = IR is the equation linking the R, V and I.

[tex]\Huge\text{Circuit Diagram:}[/tex]

Circuit Diagram no 1 attached is of this question. In the circuit diagram, V is voltmeter to find the potential difference, A is the ammeter to find the current, R is the resistance i.e. the conductor wire, The switch and the battery.

Suppose the wire of length 100 cm is connected to a battery, the Voltmeter observes the potential difference and ammeter reads the current of the wire. We will use the R, V and I i.e. V = IR equation to find out the resistance of that wire and Record the resistance. Then attach another small wire of suppose 90 cm to the battery, and similarly Find out its resistance too. After recording the resistance 3 or 4 times, you will observe that When you decrease the length of the wire,

The resistance of a conductor depends upon the following factors.

                   [tex]{\Longrightarrow}\qquad \qquad \qquad R\quad {\propto}\quad L[/tex]    

                   [tex]{\Longrightarrow}\qquad \qquad \qquad R\quad {\propto}\quad \frac{1}{A}[/tex]

The relation between only length of the wire and resistance is [tex]R\quad {\propto} \quad L[/tex] . The relation of R, L and A is given by, ρ

                    [tex]{\Longrightarrow}\qquad \qquad \qquad R\quad {\propto}\quad \frac{L}{A}\\\\{\Longrightarrow}\qquad \qquad \qquad R\quad =\ \frac{\ {\rho}\ L\ }{A}[/tex]

Where ρ is known as resistivity depends upon the nature of the material of the wire. The meter of resistivity is Ω x m(Ohm x meter).

[tex]\Huge\text{I-V Characteristic:}[/tex]

I-V curves of an electrical device or component, are a set of graphical curves which are used to define its operation within an electrical circuit. I-V characteristic curves show the relationship between the current flowing through an electronic device and the applied voltage across its terminals. The circuit diagram to find I-V characteristic must have a resistor which is a device or component connected to a battery which is providing the potential difference V. When a resistor is connected to a battery, current I is observed due to drift velocity. To find the current and potential difference(voltage) the circuit must have the Ammeter and voltmeter. Recorded current and voltage must be used to plot the graph to check the I-V characteristic. The picture attached is the circuit diagram.

We calculate the resistance at constant temperature by ohm's law. The Ohms law is applied at constant temperature because the resistance of any material varies with the change in temperature. It shows a linear relationship between the applied voltage and the resulting current, resistance being a constant. So we could use V = IR because resistance is constant at constant temperature.

Answer:

The frictional force on the block is 118 N.

Explanation:

Given;

horizontal force applied on the block, f = 80 N

mass of the block, m = 20.0 kg

coefficient of friction, μ = 0.6

The frictional force on the block is calculated as;

F = μR

F = μ(mg)

F = 0.6(20 x 9.81)

F = 117.7 N

F = 118 N.

Therefore, the frictional force on the block is 118 N.

Answer:

C. Both a and b

Explanation:

Firstly, persons and objects in a moving plane as described in this question, are moving at the same speed as the plane even if there is no individual movement of these objects.

However, this question describes a person sitting still in a moving plane. This means that;

- The person is motionless in relation to everything in the plane i.e the person is not moving even if other things in the plane are.

- The person is in motion compared to everything on the ground i.e. the person is moving at the same speed as the plane, hence, in comparison with the ground, the person is moving.

Therefore, options A and B are correct

Answer:

An object at rest is described by Newton's First Law of Motion. An object in static equilibrium has zero net force acting upon it. The First Condition of Equilibrium is that the vector sum of all the forces acting on a body vanishes.

Explanation:

Answer:

see below

Explanation:

the first condition means that the light ray inside the optically denser medium hits the surface of the optically less dense medium.

this in simple words means, light must be travelling from am optically denser medium to an optically less dense medium

hope this helps :)

Answer:

Now, think on the electrons flowing through a conductor (we can think on the resistor as a simple conductor, like a piece of metal)

Inside the conductor, we have some "fixed" (they do not flow with the current) electrons, such that as the current flows in the conductor, the flowing electrons can interact with the fixed ones in the conductor. Then we can have collisions inside the conductor.

In those collisions, the flowing electrons leave energy in the conductor, and as we know, heat is a form of energy. Then when we have a lot of these collisions, the temperature of the conductor increases.

That is why electronic devices get hot.

Also, as the temperature of a conductor increases, the electrons inside of it start to move more, then the probability of an interaction with the flowing electrons increases.

Answer:

Carbon Sink- photosythesis, ocean absorption, fossilization

Carbon Source- combustion, respiration

Explanation:

Answer:

Explanation:

Electric Bulb: In an electric bulb, the filament of bulb gives light because of heating effect of electricity. The filament of bulb is generally made of tungsten metal; having melting point equal to 3380°C.

Electric iron: The element of electric iron is made of alloys having high melting point. Electric heater and geyser work on the same mechanism.

Electric fuse: Electric fuse is used to protect the electric appliances from high voltage; if any. Electric fuse is made of metal or alloy of metals, such as aluminium, copper, iron, lead, etc. In the case of flow of higher voltage than specified, fuse wire melts and protects the electric appliances.

Across

3) biomass

5) fossil

6) dioxide

7) hydro

8) nuclear

Down

1)?

2)?

4) solar

Option d...

Move more slowly........

When the temperature of a substance is lowered its particles move more slowly. Option d is correct. Temperature directs to the hotness or coldness of a body.

Temperature directs to the hotness or coldness of a body. In clear terms, it is the method of finding the kinetic energy of particles within an entity. Faster the motion of particles more the temperature.

Temperature is essential in all areas of Science right from Physics to Geology and also it is important in most parts of our everyday life.

As the temperature of a substance is lowered its particles move more slowly.

Hence Option d is correct.

To learn more about the temperature refer to the link;

https://brainly.com/question/7510619

KE = 1000 J

Math

Pre-Algebra

Order of Operations: BPEMDAS

Physics

Energy

Kinetic Energy Formula: [tex]\displaystyle KE = \frac{1}{2}mv^2[/tex]

Step 1: Define

m = 20 kg

v = 10 m/s

Step 2: Find KE

Answer:

48 kg m/s north

Explanation:

This is not the exact answer but if there's something really close choose that answer

Answer:

6

Explanation:

From the given question, since a total of 12 V was obtained from the battery which is made up of a number of cells with each producing 2.0 V.

Assuming that the cells have a very low internal resistance, then;

minimum number of electric cells in the car battery = [tex]\frac{total voltage from the cells}{individual voltage of the cells}[/tex]

                                          = [tex]\frac{12}{2}[/tex]

                                          = 6

Thus, the minimum number of electric cells in the car battery is 6.

This implies that the addition of 6 cells which has 2.0 V supply in the battery produces a total of 12 V. Provided that the cells have a very low internal resistance.

Answer:

[tex]125\:\mathrm{minutes\: or\: }2.08\bar{3}\: \mathrm{hours}[/tex]

Explanation:

Speed is given by [tex]s=\frac{d}{t}[/tex], where [tex]d[/tex] is distance travelled and [tex]t[/tex] is time. Rearranging this equation, we have [tex]t=\frac{d}{s}[/tex].

Plugging in our given information:

[tex]t=\frac{d}{s}=\frac{1500\:\mathrm{km}}{720\:\mathrm{km/h}}=2.08\bar{3}\: \mathrm{hours}[/tex]

Thus, our answer is:

[tex]2.08\bar{3}\: \mathrm{hours}\cdot \frac{60\:\mathrm{minutes}}{1\:\mathrm{hour}}=\fbox{$125\:\mathrm{minutes}$}[/tex]

Answer:

High in the atmosphere, air pressure decreases. ... A low pressure system has lower pressure at its center than the areas around it. Winds blow towards the low pressure, and the air rises in the atmosphere where they meet. As the air rises, the water vapor within it condenses, forming clouds and often precipitation.

Explanation:

Answer:

0.196

Explanation:

According to Newton's second law

\sumFx = ma

Fm-Ff = ma

Fm is the moving force

Ff is the frictional force

m is the mass = 9kg

a is the acceleration = 2.4m/s²

Fm = Wsin theta

Fm = 9(9.8)sin25°

Fm = 37.28N

Ff is the frictional force = nmgcos theta

Ff = n(9)(9.8)cos25°

Ff = 79.94n

Substitute the given values into the formula

37.28-79.94n = 9(2.4)

-79.94n = 21.6-37.28

-79.94n = -15.68

n = 15.68/79.94

n = 0.196

Hence the coefficient of kinetic friction between the potted plant and the incline is 0.196

Answer:

0.04658 m from the nut

Explanation:

Recall that torque is defined as the vector product of force (F) times distance (d). Then, given that the force is applied perpendicular to the wrench, gives the sine of the angle (90 degrees) equal to 1, simplifying the calculation which consists basically on solving for d in the equation:

2.25 N*m = 48.3 N * d

d = 2.25 /48.3  m ≈ 0.04658 m

Answer:

92 OHMS

Explanation:

The resistance will be "92 ohm".

According to the question,

Current,

Voltage,

As we know the formula,

→ [tex]I = \frac{V}{R}[/tex]

or,

→ [tex]R = \frac{V}{I}[/tex]

By substituting the values, we get

→     [tex]= \frac{230}{2.5}[/tex]

→     [tex]= 92 \ ohm[/tex]

Thus the answer above is right.

Learn more:

https://brainly.com/question/16841137

The centripetal force is the force that keeps a body moving in a circular path.

The centripetal force is given by; F = mv^2/r

1) We have;

F = 5,600 N

v = 20 m/s

r =?

m = 700 kg

Making r the subject of the formula;

r =mv^2/F

r = 700 × (20)^2/5,600

r = 50 m

2) F = mv^2/r

F = 900 × (5)^2/30

F = 750 N

3) Making r the subject of the formula;

r =mv^2/F

r = 800 × (40)^2/ 16,000

r = 80 m

Learn more: https://brainly.com/question/11324711

Answer:

gases.

Explanation:

gases have the highest volume. if you compress (increase pressure) a gas, the volume decreases and it will take up less space as a liquid, and if you compress more, the liquid will become a solid.

additionally info: this is generally true, but as you get into more difficult subjects, this rule does not hold. for example, some substances cannot obtain a certain phase of matter when they are a certain temperature and or pressure. but that could be way more out of this questions league.

Answer:

3240000000 Joules

Explanation:

Answer:

the answer is T!!

!!!!!!!!

Answer:

true

Explanation:

hope this helps

Answer:

1. Simply τ = m x g x r = 54kg x 9.8m/s² x 0.050m = 26 N·m

2. The bucket creates a torque

τ = 75kg x 9.8m/s² x 0.075m = 55 N·m,

so we must create the same torque with the handle.

55 N·m = F x 0.25m

F = 220 N

Explanation:

Hope this is helpful

Answer:

The speed of the wave as it travelled through the brass bell is;

B. 4,700 m/s

Explanation:

The given parameters are;

The wavelength of the sound wave produced from the brass bell, [tex]\lambda _{(air)}[/tex]  = 3.5 m

The wavelength of the wave in the brass bell, [tex]\lambda _{(brass \ bell)}[/tex]  = 47 m

The frequency of the wave in the brass bell, f = 100 Hz

The given equation for wave speed, v = f × λ

Therefore, the speed of the wave as it travelled through the brass bell, [tex]v _{(brass \ bell)}[/tex], is given as follows;

[tex]v _{(brass \ bell)}[/tex] = f × [tex]\lambda _{(brass \ bell)}[/tex] = 100 Hz × 47 m = 4,700 m/s  

The speed of the wave as it travelled through the brass bell =  [tex]v _{(brass \ bell)}[/tex] = 4,700 m/s

Answer:

B.) 4700 m/s

Explanation: