The space shuttle slows down from 1200 km/hr to 400 km/hr over 10 seconds. What is the space shuttles deceleration?

Answer: It is important to use both QUALITATIVE and QUANTITATIVE data because the limitations of one type of data are counteracted by the advantages of the other.

Explanation:

QUALITATIVE data defined as type of data that centers on the measurement of the features of the subject under study. This is obtained through careful observations. It is a non numerical type of data. Some examples includes: sex(male or female), name, and colours. The limitations of using only qualitative data for a research includes:

--> it can not be statistically represented

--> the results can not be verified

--> it is time consuming and

--. It requires alot of labor.

QUANTITATIVE data is defined as the type of data that centers on the measurement of the amount and quantity of the subject under study. It can be used to conduct a large study than qualitative data. Examples include the heights and weights of students. The limitations of quantitative research includes:

--> poor representation of target population

--> inability to control the environment and

--> lack of resources for data collection.

Therefore, It is important to use both QUALITATIVE and QUANTITATIVE data analysis because the limitations of one type of data are counteracted by the advantages of the other. I hope this helps, thanks!

Answer:

Using a combination of qualitative and quantitative data can improve an evaluation by ensuring that the limitations of one type of data are balanced by the strengths of another. This will ensure that understanding is improved by integrating different ways of knowing.

Explanation:

Answer:

Yes, for most, but not all people.

Explanation:

Answer:

Explanation:

I FOUND YOUUU

Answer:

300,000

Explanation:

right here dad_0 ;) u got  snap?

Answer:

friction

Explanation:

there is greater friction on the carpet than on the bare floor making the object go slower:)

Answer:

when molten rock cools above the earth's surface

Explanation:

Extrusive Igneous Rocks Extrusive igneous rocks are formed when molten magma spill over to the surface as a result of a volcanic eruption. The magma on the surface (lava) cools faster on the surface to form igneous rocks that are fine-grained.

Answer:

the acceleration is negative which means it is going in the opposite direction of the actual motion which concludes the reason why the ball is slowing down. However, when the ball is stopped, there is no acceleration as the ball is in equilibrium

Explanation:

Answer:

they are going to attract

Explanation:

Question:

A cork floats on the surface of an incompressible liquid in a container exposed to atmospheric pressure. The container is then sealed and the air above the liquid is evacuated. The cork:

A. sinks slightly  

B. rises slightly  

C. floats at the same height  

D. bobs up and down about its old position

Answer:

The correct answer is C)  floats at the same height  

Explanation:

The liquid is incompressible because its density very high and leaves no room for further compaction whether or not there is atmospheric pressure. So when you put a cork on the liquid, pressure or no pressure, there is no displacement hence it floats on the same height regardless of the absence of air.

Cheers!

The question is incomplete, the complete question is;

A student is measuring the volumes of nectar produced by a flowering plant for an experiment. He measures nectar from 50 flowers using a graduated cylinder that measures to the nearest millilitre (mL). Which statement describes a change that can help improve the results of his experiment?

A.) His measurements will be more precise if he takes measurements from an additional 100 flowers. B.) His measurements will be more accurate if he uses a graduated cylinder that measures to the nearest tenth of a mL. C.) His measurements will be more precise if he uses a graduated cylinder that measures to the nearest tenth of a mL. D.) His measurements will be more accurate if he takes measurements from an additional 100 flowers.

Answer:

His measurements will be more accurate if he uses a graduated cylinder that measures to the nearest tenth of a mL.

Explanation:

In the measurements of volume using most graduated cylinders, the cylinders are calibrated to the nearest tenth owing to the uncertainty in the measurement of volume.

Hence if a cylinder has measures to the nearest milliliter(mL), then he can improve his experiment by using a graduated cylinder that measures to the nearest tenth of a mL

Answer:

Your answer is: K.E = 8.3 J

Explanation:

If the height (h) = 169.2 meters (m) and the mass (m) is 0.005 kilograms (kg) the total energy will be kinetic energy which is equal to the potential energy.

K.E = P.E and also P.E equals to mgh

Then you substitute all the parameters into the formula  ↓

P.E = 0.005 × 9.81 × 169.2

P.E = 8.2908 J

So your answer is 8.2908 but if you round it is K.E = 8.3

Answer:

a i. The higher curve is "thick wall" and the lower curve is "thin wall".

a ii. The thicker the wall, the more time it takes to transfer the same amount of heat. Thus, the thick wall would have a less steep drop in temperature as it transferred lesser heat from the room to the surroundings and the thinner wall would have a steeper drop in temperature as it conducted more heat away from the room to the surroundings.

Answer:

B) is the answer

Explanation:

A) is 25 N

B) is 36N

C) is 30N

D)15N

Answer: Her condition most likely is fatigue.

Explanation:

Answer:

9m/s

Explanation:

18/2 = 9m/s

Answer:

False

Explanation:

Metamorphic rock can melt into magma or weathers down (erosion) into sediments.

Answer:

what is the direction of the sum of these two vectors?

Answer:

69.6

Explanation:

Ax= 0

Ay= 63.5

Bx= 101 cos 57= 55.009

By= 101 sin 57= 84.706

Tan-1 = (84.706/55.009)

         = 69.6

Answer:

65

Explanation:

50+3*5

Answer:

Mechanical energy is constant and it remains the sum of the potential and kinetic energies in a system.  

In the system, we have inverse relation between potential and kinetic energies so it will make mechanical equal

Answer:

29.4N is a 3.0kg bag of bolts weigh.

The force by gravitation is called the weight of a body. The weight of the body with a mass of 3 Kg is 29.4 N.

Gravitational force is a kind of force by which an object attracts other objects into its center of mass. Earth attracts every objects into its center and thereby we are all standing on the surface.

Gravitational force is acting downward on a body and it depends on the mass of the body. Greater the mass, greater will be the fore of gravitation and its weight experienced on earth.

Given that, mass of the bag = 3 Kg.

force by gravitation  = Mg = 3 × 9.8 m/s² = 29.4 N.

where, g is the acceleration due to gravity. Therefore, the weight of the bag is 29.4 N. Hence, option D is correct.

To find more on gravitational force, refer here:

https://brainly.com/question/12528243

#SPJ2

Answer:

D

Explanation:

I t0ook the test and chose B and it was wrong and the answer was D.

Answer:

A thick grouping of nerves that runs down the back of the embryo

Explanation:

Answer:

no one ever amswers my questions

Answer:

1.81 s

Explanation:

From the given information:

The links between the cars are:

1-2, 2-3, 3-4, 4-5, 5-6, 6-7, 7-8, 8-9, 9-10, 10-11, 11-12, 12-13, 13-14, 14-15, 15-16, 16-17, 17-18, 18-19, 19-20.

where;

1 denotes the first car that joins strongly attached to the engine.

There are 19 links from the above connections and each one of them has a 2 cm slack.

Thus; the total slack = 2 × 19 = 38 cm

However, the speed of the train = 21 cm/s

Then, the time taken by the pulse to travel the length of the train is expressed by using the formula:

= length / speed

= 38 / 21

= 1.81 seconds

Thus, the required time = 1.81 s

Answer:

A

Explanation: This is the correct answer

Answer:

yeyeyeyeyeye

Explanation:

Answer:

The one that is 100 cm from the center.

Explanation:

Given that merry-go-round means moving at uniform circular motion or constant angular speed. Hence the person who is closer to the center is moving at a slower speed, while the one far away from the center has a larger linear speed because he has moved a long distance in the same amount of time, despite being on these objects.

To illustrate

A with the 50 cm

B with the 100 cm

Hence, to get speed, we have

A = 2 * pi * 50 / T

B = 2 * pi * 100 / T

And by the explanation of angular speed

We have w = 2*pi/T where w is the angular speed in radians/s

Hence we have

A = 50w

B = 100w

Therefore, the one that is 100 cm from the center has a larger linear speed.

Answer:

Kinetic energy depends on mass and speed (or magnitude of velocity).

K.E.  = 1/2 M S² or The amount of kinetic energy of a moving object has dependence on its  mass and its velocity.

Explanation: They are both right for a certain question

The kinetic energy of a moving object depends on its mass and velocity. The higher the velocity higher will be the kinetic energy. Mass also have the similar effect.

Kinetic energy of an object is the energy generated by virtue of its motion. When particles of an  object acquire much energy to overcome the intermolecular force, they gain kinetic energy to move apart.

Kinetic energy is related to the mass and velocity of the moving object. The expression relating kinetic energy with these parameters is written below:

Ke = 1/2 mv².

As per the relation, the kinetic energy of an object increases with an increase in mass or velocity or both. Hence, massive objects with greater velocity is having greater kinetic energy.

Find more on kinetic energy:

https://brainly.com/question/15764612

#SPJ5

Answer:

These are some of the ones I found or know of.

Explanation:

F=ma

A= v-u/t

A= v^2/r