The carbon atoms are sp3 hybridized.
Hope this helps!
A student heated a mixture of iron filings and sulfur strongly. He saw a red glow spread through the mixture as the reaction continued. At the end of the experiment a black solid had been formed.
a) Explain what the red glow indicates.
b) Give the chemical name of the black solid.
c) Write a word equation that and a balanced chemical equation to represent the reaction which has taken place.
d) The black solid is a compound. Explain the difference between the mixture of sulfur and iron and the compound formed by the chemical reaction between them.
Please answer part a, b, c, and d.
If you don't know the answer to all parts but you know the answer to one part then please answer it will still help
Answer:
the answer is c or a am I right☺
Metals usually lose electrons
and become
Answer:
A positive ion
Explanation:
when an atom losses an ion it become positive while when an atom gains an atom it becomes negative
which element is in period 2 and group 6
what is the maximum wavelength of light that can ionize hydrogen in its ground state?
Answer: 123×10−7m.
Explanation:
Cómo se clasifica el aire?
Answer:
Not me
Explanation:
A reaction between an acid and a base produced lithium chloride (LiCl). What acid and base combination could produce this salt?
A. sulfuric acid and lithium hydroxide
B. hydrochloric acid and lithium hydroxide
C. sulfuric acid and magnesium hydroxide
D. hydrochloric acid and magnesium hydroxide
Answer:
B. hydrochloric acid and lithium hydroxide
Explanation:
Answer:
thank you!
the answer is B) hydrochloric acid and lithium hydroxide.
Explanation:
have a rest of your day.
Calcule la molaridad de una solución acuosa de ácido sulfúrico (H₂SO₄) que se preparó al mezclar, en un recipiente aforado, 4 moles del ácido con suficiente agua hasta completar 8 litros de solución. *
0.4
0.6
0.3
0.5
Considerando la definición de molaridad, la molaridad de una solución acuosa de ácido sulfúrico (H₂SO₄) es 0.5 [tex]\frac{moles}{litro}[/tex].
La molaridad es una medida de la concentración de un soluto en una disolución que se define como el número de moles de soluto que están disueltos en un determinado volumen.
La molaridad de una solución se calcula dividiendo los moles del soluto por el volumen de la solución:
[tex]Molaridad=\frac{numero de moles de soluto}{volumen}[/tex]
La Molaridad se expresa en las unidades [tex]\frac{moles}{litro}[/tex].
En este caso, sabes que una solución acuosa se preparó al mezclar 4 moles del ácido con suficiente agua hasta completar 8 litros de solución. Entonces, sabes que:
número de moles de soluto= 4 molesvolumen= 8 litrosReemplazando en la definición de molaridad:
[tex]Molaridad=\frac{4 moles}{8 litros}[/tex]
Resolviendo:
Molaridad= 0.5 [tex]\frac{moles}{litro}[/tex]
Finalmente, la molaridad de una solución acuosa de ácido sulfúrico (H₂SO₄) es 0.5 [tex]\frac{moles}{litro}[/tex].
Aprende más:
https://brainly.com/question/17647411?referrer=searchResultshttps://brainly.com/question/21276846?referrer=searchResultsexplain why it is necessary to change models as new information becomes available.
Answer:
Scientific models are not a replacement for experimentation. They can be used in conjunction with experimentation to further understanding of a concept, event, or process. They are based on current scientific knowledge and may have to be changed when new discoveries are made.
Explanation:
that's my answer
#carryonlearning
2. Calculate the heat of combustion of C6H14(l) in kJ/mol if 1.66 g of C6H14(l) were ignited in a calorimeter containing 2750. g H2O. A 3.54˚C temperature rise was observed. The calorimeter constant is 11.2 kJ/˚C. The specific heat of water is 4.184 J/g˚C.
This problem is describing the combustion experiment where by the heat of combustion of 1.66 g of liquid C6H14 can be calculated via calorimetry. The calorimeter (C=11.2kJ/°C) contains 2750. grams of water with a temperature rise of 3.54 °C, it means we can calculate the total heat released by the combustion of this hydrocarbon via:
[tex]Q_{combustion}=-(Q_{calorimeter}+Q_{water})[/tex]
Because the heat of combustion is released to the water and the calorimeter. Next, we break down each heat and subsequently plug in the given values:
[tex]Q_{combustion}=-(11200\frac{J}{\°C}*3.54\°C +2750.g*4.184\frac{J}{g\°C}*3.54\°C )\\\\Q_{combustion}=-80,379J=-80.4kJ[/tex]
After that, we calculate the moles of C6H14 by considering the given mass and its molar mass (86.18 g/mol):
[tex]n=1.66g*\frac{1mol}{86.18g} =0.01926mol[/tex]
And finally, we divide the total heat of combistion by the moles to get the heat of combustion:
[tex]\Delta H_{comb}=\frac{-80.4kJ}{0.01926mol} =4,174\frac{kJ}{mol}[/tex]
Learn more:
https://brainly.com/question/14317568https://brainly.com/question/14154214What role do insects play in the fertilization process?[Bees]
AThey transport seeds from trees to the groundincorrect answer
BThey collect nectar from the interior parts of plantsincorrect answer
CThey deliver pollen from the stamens of plants to the ovaries of other plantsincorrect answer
DThey eat fruit, exposing the seeds so that they can sprout and grow
Answer:
C. They deliver pollen from the stamens of plants to the ovaries of other plants
Explanation:
hope this helps :)
which elements from the periodic table are the least reactive
Noble gases are the least reactive of all elements. That's because they have eight valence electrons, which fill their outer energy level. This is the most stable arrangement of electrons, so noble gases rarely react with other elements and form compounds.
Group 18; The Noble Gases contains the elements on the periodic table that would be the least reactive out of all the elements. So, this include any gas element, such as helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), radon (Rn), and oganesson (Og). Hence, if you have the options:
(The Option in Bold is Correct)
O the group with fluorine at the topO the group with carbon at the topO the group with helium at the topO the group with hydrogen at the top-----------------------------
Hope this helps!
-----------------------------
Help this is so confusing like
Answer: which of the following is qualitative?
A. 100-calorie apple
B. 1-liter soda
C. triangular crystal
D. 10-inch brick
answer is D
Explanation:
the atom is one of the basic units of matter. which part of the atom mostly determines the size of the atom?
Answer:
nucleus
Explanation:
The nucleus contains the majority of an atom's mass because protons and neutrons are much heavier than electrons, whereas electrons occupy almost all of an atom's volume
HELP!!
Do you think the number of asteroid samples a pod is carrying could make a difference? Might that explain why the
same strength thruster force caused this pod to have a different change in velocity? Explain your ideas, even if you are
unsure
A significant amount of methane (CH4) is trapped underground or under marine sediments as Select one: a. methane hydrates. b. liquid methane. c. inorganic carbon. d. natural gas.
Methane is found under the ground or under marine sediments as natural gas which is mined along with crude oil.
Methane is an alkane and has the formula CH4. It is most commonly used as fuel. Methane is the gas that has been renowned as being responsible for explosion in coal mines.
Methane is found under the ground as natural gas which is mined along with crude oil. Large deposit of natural gas is found in many countries in Asia, Africa and the middle east.
Learn more: https://brainly.com/question/6505878
2. The mass number tells the total number of
nucleus of an atom. These particles collectively are called
both are located in the nucleus.
Answer: The mass number tells the number of protons.
Explanation:
Will any of these properties change after a couple of hours in the sun
Explanation:
what properties are you talking about?
describe the development of the theory of atomic structure
this question is worth 6 marks
Consider the following chemical reaction.
3 Zn(C₂H₃O₂)₂(aq) + 2 Na₃PO₄(aq) → 6 NaC₂H₃O₂(aq) + Zn₃(PO₄)₂(s)
A chemist makes a solution of zinc acetate by dissolving 20.5 g Zn(C₂H₃O₂)₂ in 105 mL H₂O. What is the concentration of this zinc acetate solution?
The concentration of the zinc acetate, Zn(C₂H₃O₂) solution is 1.067 M
We'll begin by calculating the number of mole in 20.5 g of Zn(C₂H₃O₂)₂Mass of Zn(C₂H₃O₂)₂ = 20.5 g
Molar mass of Zn(C₂H₃O₂)₂ = 65 + 2[(12×2) + (3×1) + (16×2)]
= 65 + 2[59]
= 183 g/mol
Mole of Zn(C₂H₃O₂)₂ =?Mole = mass / molar mass
Mole of Zn(C₂H₃O₂)₂ = 20.5 / 183
Mole of Zn(C₂H₃O₂)₂ = 0.112 mole Finally, we shall determine concentration of Zn(C₂H₃O₂). This can be obtained as follow:Mole of Zn(C₂H₃O₂)₂ = 0.112 mole
Volume = 105 mL = 105 / 1000 = 0.105 L
Concentration of Zn(C₂H₃O₂)₂ =?Concentration = mole / Volume
Concentration of Zn(C₂H₃O₂)₂ = 0.112 / 0.105
Concentration of Zn(C₂H₃O₂)₂ = 1.067 MTherefore, the concentration of the zinc acetate, Zn(C₂H₃O₂) solution is 1.067 M
Learn more: https://brainly.com/question/25511880
what is the main difference between sexual and asexual reproduction
Answer:
Asexual reproduction does not involve sex cells or fertilisation . Only one parent is required, unlike sexual reproduction which needs two parents. Since there is only one parent, there is no fusion of gametes and no mixing of genetic information.
The main difference between sexual and asexual reproduction is that sexual reproduction involves the fusion of gametes, while asexual reproduction does not.
In sexual reproduction, offspring are produced through the fusion of gametes (reproductive cells) from two parent organisms. This fusion, known as fertilization, results in offspring that inherit genetic material from both parents. This genetic recombination introduces variation in the offspring, promoting genetic diversity within a population.
In contrast, asexual reproduction involves the production of offspring without the involvement of gametes or the fusion of genetic material from two parents. A single parent organism reproduces by generating genetically identical or near-identical offspring through various methods such as budding, fragmentation, or binary fission. Asexual reproduction typically leads to offspring that are genetically identical to the parent, lacking the genetic diversity observed in sexual reproduction.
Learn more about reproduction, here:
https://brainly.com/question/18653168
#SPJ6
Review the information from the documents you read for this assignment. Use what you learned to answer the following question. What were the major effects of a dust storm? Give your answer in at least four sentences.
Answer:
what people experienced during a dust storm
how people reacted to a dust storm
what people did after a dust storm
Explanation:
i passed
Answer:
what people experienced during a dust storm
how people reacted to a dust storm
what people did after a dust storm
Explanation:
What is the best way to torture an ant
strong salt solution
normal salt wouldnt work becaue unlinke slugs they have a waterproof skin
Excess Na2SO4 (aq) is added to a 42.53 mL sample of Ba(NO3)2(aq).
1. What is the formula of the precipitate?
The formula for the precipitate is 2Na(NO3)(aq).
2. If 3.046 grams of precipitate was formed, what was the molarity of the Ba(NO3)2(aq)?
1. The formula of the precipitate formed is Ba₂SO₄(s)
2. The molarity of the Ba(NO₃)₂ solution is 0.188 M
1. Determination of the formula of the precipitate formed.
We'll begin by writing the net ionic equation for the reaction between Na₂SO₄ and Ba(NO₃)₂. This is given below:Na₂SO₄(aq) + Ba(NO₃)₂(aq) —>
2Na⁺(aq) + SO₄²¯(aq) + Ba²⁺(aq) + 2NO₃¯(aq) —> Ba₂SO₄(s) + 2Na⁺(aq) + 2NO₃¯(aq)
Cancel the spectator ions (i.e Na⁺ and NO₃¯) to obtain the net ionic equation
SO₄²¯(aq) + Ba²⁺(aq) —> Ba₂SO₄(s)
Therefore, the formula of the precipitate formed is Ba₂SO₄(s)
2. Determination of the molarity of Ba(NO₃)₂
We'll begin by calculating the number of mole of in 3.046 g of precipitate, Ba₂SO₄Molar mass of Ba₂SO₄ = (2×137) + 32 + (4×16) = 370 g/mol
Mass of Ba₂SO₄ = 3.046 g
Mole of Ba₂SO₄ =?Mole = mass /molar mass
Mole of Ba₂SO₄ = 3.046 / 370
Mole of Ba₂SO₄ = 0.008 mole Next, we shall determine the number of mole of Ba(NO₃)₂ required to produce 0.008 mole of Ba₂SO₄Na₂SO₄(aq) + Ba(NO₃)₂(aq) —> Ba₂SO₄(s) + 2NaNO₃(aq)
From the balanced equation above,
1 mole of Ba(NO₃)₂ reacted to produce 1 mole Ba₂SO₄.
Therefore,
0.008 mole of Ba(NO₃)₂ will also react to produce 0.008 mole of Ba₂SO₄
Thus, 0.008 mole of Ba(NO₃)₂ is required for the reaction.
Finally, we shall determine the molarity of the Ba(NO₃)₂ solutionMole of Ba(NO₃)₂ = 0.008 mole
Volume = 42.53 mL = 42.53 / 1000 = 0.04253 L
Molarity of Ba(NO₃)₂ =?Molarity = mole / Volume
Molarity of Ba(NO₃)₂ = 0.008 / 0.04253
Molarity of Ba(NO₃)₂ = 0.188 MLearn more: https://brainly.com/question/13403073
An increase in which property would cause an electromagnetic wave's energy
to increase?
A. Wavelength
B. Mass
C. Frequency
D. Speed
SUBMIT
Salt dissolving in water is an example of what?
chemical change
chemical property
Physical Change
Answer:
chemical change
Explanation:
because chemical chande is a permanent change
Which is the correct word equation for photosynthesis? *
Answer:
The process of photosynthesis is commonly written as: 6CO2 + 6H2O → C6H12O6 + 6O2. This means that the reactants, six carbon dioxide molecules and six water molecules, are converted by light energy captured by chlorophyll (implied by the arrow) into a sugar molecule and six oxygen molecules, the products.
How many grams of sodium hydroxide are present in 250.0 mL of a 0.300 M NaOH solution?
b) How much Phosphorus Pentachloride can be made if you begin with 17.8 g of chlorine gas?
Write a procedure for "how to crack an egg" in cooking. You must have at least 3 steps. The format of your procedure is more important than the actual steps on how to do it.
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
Here's the procedure to Crack an egg ~
Step 1 ~
Hold the egg in your hand and tap it on a firm surfaceStep 2 ~
Gently pull the shells apartStep 3 ~
And release the yolk in the bowlDescribe how the production of a gas (carbon dioxide) suggests a chemical change
occurred?