What volume will be occupied by 33.0 grams of CO2 at 500 torr and 27 °C?

B.) have a better chance of colliding with other atoms.

Answer:

B (Quantitative)

Explanation:

a clever way to remember the difference between quantitative and qualitative is that there is a n in quantitative which is the first letter to the word number. So quantitative is an oberservation with numbers

a.

Explanation: I saw it on another website.

Answer:

3.47 × 10⁻¹⁹ J

Explanation:

A yellow line occurs at 572.8 nm in the emission spectrum of phosphorus. When an electron undergoes this process, it requires an amount of energy to produce a photon of this light. We can calculate the energy (E) using the following expression.

E = h × c/λ

where,

E = 6.63 × 10⁻³⁴ J.s × 3.00 × 10⁸ m/s/5.728 × 10⁻⁷ m

E = 3.47 × 10⁻¹⁹ J

Answer: 0.217 mol

Explanation:

To find the amount of moles in a 10 g sample, we need the molar mass of ethanol.

Molar Mass: 46.07 g/mol

Now that we have the molar mass, we can find moles.

[tex]10.0 g*\frac{1mol}{46.07g}=0.217 mol[/tex]

We know that there are 0.217 mol in a 10.0 gram sample.

Answer:

Physical

Explanation:

Answer:

Answer:

Percent yield = 17%

Explanation:

Given data:

Actual yield of lithium chloride = 6.0 g

Theoretical yield of lithium chloride = 35.4 g

Percent yield = ?

Solution:

Formula:

Percent yield = (actual yield / theoretical yield )× 100

Now we will put the values in formula.

Percent yield = (6.0 g/ 35.4 g)× 100

Percent yield = 0.17 × 100

Percent yield = 17%

Answer:

This is because, the is less chance of trapping impurities in the developing crystal lattice

Answer:

injuries

Explanation:

bc it will burn your hands

Answer:

Water-gas A mixture of carbon monoxide (CO) and hydrogen (H2) produced by passing steam over red-hot coke using the endothermic reaction C + H2O # CO + H2.

Explanation:

Explanation:

Sulfur has 6 valence electron

Valence electron shows group( in column)

Answer:

C I belive

Explanation:

The higher lattice energy in option a is for LiF. Similarly, MgS have higher lattice energy that NaCl and  MgO have higher lattice energy than RbI.

Lattice energy of a compound is the energy required to convert one mole of that compound into its constituent gaseous ions. Lattice energy increases as the size of the ion decreases. As well as, higher the charge of the ions higher will be the lattice energy.

In LiF and KBr, Li and F are the smaller ions and is having higher lattice energy. In the case of NaCl and MgS, Mg and S are having +2 charge and are smaller causes MgO higher in lattice energy.

Similarly in the case of MgO and RbI the same concept can be applied. Rb⁺ and I⁻ are bigger ions where as Mg²⁺ and O²⁻ are comparatively smaller and have higher charge result in higher lattice energy.

Thus compound which have higher lattice energy in option a is LiF, in option b is MgS and in option C is MgO.

To learn more about lattice energy, refer the link below:

https://brainly.com/question/17011733

#SPJ2

Question: How many atoms of sodium (Na) are there on either side of the equation?

Options: A) one B) two C) four D) six

Correct answer: D) six

Answer:

It is NOT six, i took the test and got it wrong. The CORRECT answer is 2

Explanation:

The cellular respiration process, which generates ATP as the final result, employs oxygen and sugar as reactants. So, the correct option is A.

Cellular respiration is the process by which organisms combine oxygen with food molecules, channeling the chemical energy from those resources into life-sustaining activities while eliminating carbon dioxide and water as waste.

Both oxygen and glucose are reactants in the mobile respiratory system. ATP is the primary component of mobile respiration; waste products include carbon dioxide and water.

Oxygen might be present or absent while cells are respiring. Nonetheless, the activity is essentially known as "cellular respiration" because the cell seems to "respire" by consuming molecular oxygen (as an acceptor of electron) and exhaling carbon dioxide (as an end product).

Therefore, the correct option is A.

Learn more about Cellular respiration, here:

https://brainly.com/question/29760658

#SPJ7

Your question is incomplete, most probably the complete question is:

The process shown in the diagram produces oxygen and sugar. Which

process uses oxygen and sugar as reactants?

Chloroplast

Mitochondrion

Sugar

CO, +H,0

ATP

Heat

Respiration

A. Cellular respiration

B. Water cycle

c. Transpiration

D. Photosynthesis

Answer:

A. An Atom

Explanation:

An atom is the smallest particle of an element, having the same chemical properties as the bulk element.

An atom of calcium is the smallest particle of calcium  that has the same chemical properties of calcium.

An atom is defined  as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each  atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.

The protons are positively charged  and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom  as a whole is neutral and stable due to presence of oppositely charged particles.

Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.

Learn more about atom,here:

https://brainly.com/question/13654549

#SPJ2

Answer:

D. Light waves travel fastest through a vaccumm

Explanation:

"In a vacuum , light waves move their fastest: 186,000 miles per second (300,000 kilometers per second). This is also the fastest that anything in the universe moves. But when light waves move through air, water or glass, they slow down."

Please mark me as brainliest! <3

Hopefully I could help! Good luck.

Answer:The Solar System speed and Milky Way speed should be switched

Explanation:

The Milky Way speed and solar system speed should be switched with each other. Therefore, option (A) is correct.

The rotation of the earth can be described as the spinning of the Earth around its own axis. The axis has an angle of 23(1/2)° and it is perpendicular to the plane of the orbit of the earth. The northern and southern hemispheres lean in a direction away from the Sun because Earth is tilted on its axis. The rotation speed of the earth is 0.3 miles/sec.

The Revolution of the earth is the movement of the Earth around the Sun in a fixed path. The revolution speed of the earth is 30 Km/s or 18.5 miles/sec. The milky way speed of the earth is 370 miles/sec and the solar system speed of the earth is 130 miles/sec.

But according to Luca's chart, the milky way speed is 150 miles/sec and the solar system speed is 370 miles/sec.

Therefore, the solar system speed and Milky Way speed need to be switched.

Learn more about the speed of the earth, here:

https://brainly.com/question/14731026

#SPJ2

Orange is the color of Sodium

Answer:

Displacement reaction

Answer:

Conduction is the process by which heat energy is transmitted through collisions between neighboring atoms or molecules. ... The fire's heat causes molecules in the pan to vibrate faster, making it hotter. These vibrating molecules collide with their neighboring molecules, making them also vibrate faster.

Explanation:

Answer:

C₆H₈O₆

Explanation:

First off, the percent of oxygen by mass of vitamin C is:

Assume we have one mol of vitamin C. Then we would have 180 grams, of which:

Now we convert each of those masses to moles, using the elements' respective atomic mass:

So the molecular formula for vitamin C is C₆H₈O₆

Answer:

6. 7870 kg/m³ (3 s.f.)

7. 33.4 g (3 s.f.)

8. 12600 kg/m³ (3 s.f.)

Explanation:

6. The SI unit for density is kg/m³. Thus convert the mass to Kg and volume to m³ first.

1 kg= 1000g

1m³= 1 ×10⁶ cm³

Mass of iron bar

= 64.2g

= 64.2 ÷1000 kg

= 0.0642 kg

Volume of iron bar

= 8.16 cm³

= 8.16 ÷ 10⁶

[tex] = 8.16 \times 10^{ - 6} \: kg[/tex]

[tex]\boxed{density = \frac{mass}{volume} }[/tex]

Density of iron bar

[tex] = \frac{0.0642}{8.16 \times 10^{ - 6} } [/tex]

= 7870 kg/m³ (3 s.f.)

7.

[tex]\boxed{mass = density \: \times volume}[/tex]

Mass

= 1.16 ×28.8

= 33.408 g

= 33.4 g (3 s.f.)

8. Volume of brick

= 12 cm³

[tex] = 12 \times 10^{ - 6} \: m^{3} \\ = 1.2 \times 10^{ - 5} \: m ^{3} [/tex]

Mass of brick

= 151 g

= 151 ÷ 1000 kg

= 0.151 kg

Density of brick

= mass ÷ volume

[tex] = \frac{0.151} {1.25 \times 10^{ - 5} } \\ = 12600 \: kg/ {m}^{3} [/tex]

(3 s.f.)

Answer:

I think its A

Explanation:

Hope this helps ;)

Answer:

Antoine Lavoisier

1) Law of Conservation of Mass

French chemist, Antoine Lavoisier in 1789, studied this law. This law states that “In all physical and chemical changes, the total mass of the reactants is equal to that of the products” or “Mass can neither be created nor destroyed.”

Answer:

823.2 J

Explanation:

PE = mgh

= (7 kg) (9.8 m/s^2) (12 m)

= 823.2 J

Answer:

Mass=m=7kg

Height=h=12m

Gravitational force=g=10m/s^2

[tex]{\boxed{\sf Potential\:energy{}_{(P.E)}=mgh}}[/tex]

[tex]{:}\longmapsto [/tex][tex]\sf P.E=7×12×10 [/tex]

[tex]{:}\longmapsto [/tex][tex]\sf P.E=84×10[/tex]

[tex]{:}\longmapsto [/tex][tex]\sf Potential\:energy=840Joule [/tex]

Answer:

(f).Condensation

CO2 exist as gaseous state at -10degree 4atm pressure and will become liquid upon increasing the pressure  

Explanation:

Using The phase diagram of CO2 we observe that

Carbon dioxide at -10degree Celsius and 4atm pressure will be in

Gaseous phase. Starting from the same point, 4atm and -10degree Celsius upon increasing the pressure the Carbon dioxide will change into liquid phase above 5.11atm pressure, this happened due to Condensation.

Therefore CO2 exist as gaseous state at -10degree 4atm pressure and will become liquid upon increasing the pressure till 5.11stm.  

The carbon dioxide has been existing in the gaseous state and with condensation, it has been converted to the liquid state. Thus, option F is correct.

The state of the gas at a particular pressure and temperature can be assessed from the phase diagram.

The state of Carbon dioxide at 4 atm and [tex]\rm -10^\circ C[/tex] have been the gaseous state.

The increase in pressure results in the decrease in the volume of the gas, as the pressure has been increased, the molecules will condense and result in the conversion of the gaseous state to the liquid state.

The carbon dioxide has been existing in the gaseous state at 4 atm and [tex]\rm -10^\circ C[/tex].  With the increase in pressure, the state of the gas has been changed to liquid due to condensation. Thus option F is correct.

For more information about the phase of gas, refer to the link:

https://brainly.com/question/8118149

Answer:

The correct answer is option c, that is, H2O.

Explanation:

The two broad classes of molecules are the polar and nonpolar molecules. Polarity illustrates the dispersion of electrical charge surrounding a molecule. The charge is unevenly distributed in a polar molecule, while it is distributed evenly in a nonpolar molecule. It can be said that a polar molecule possesses the regions of partial charge.

A polar molecule like water possesses a dipole, that is, a part of the molecule exhibit a partial negative charge, and the part of the molecule possesses a partial positive charge. Generally, a polar molecule comprises polar or ionic covalent bonds. The polar molecules are generally soluble in polar solvents and are hydrophilic. They have higher melting points because of the strong intermolecular forces between them in the form of hydrogen bonding.

In the given options, H2O is a polar molecule as the hydrogen atoms electrons get fascinated towards the oxygen atom's electrons, which forms a positive charge on the atoms of hydrogen, and a negative charge on the oxygen atom.

Of the molecules, only water (H₂O) is polar and the correct option is option C.

A polar molecule is a molecule that has a partial positive charge (+) and a partial negative charge (-) due to an uneven distribution of electron density. This occurs when there is a significant difference in electronegativity between the atoms within the molecule, causing the electrons to be pulled more towards one atom, creating a polarity.

In a polar molecule, the positive and negative charges are not balanced, resulting in a molecular dipole moment. The molecule may have a distinct positive and negative end, referred to as the poles.

Thus, the ideal selection is option C.

Learn more about Polar molecule, here:

https://brainly.com/question/1946554

#SPJ6

Answer:

[tex]Q=-213.84J[/tex]

Explanation:

Hello!

In this case, since energy involved when a substance undergoes a temperature change due to heat addition or removal is computed as shown below:

[tex]Q=mC\Delta T[/tex]

As the aluminum has a specific heat of 0.900 J/g°C and 14.4 g underwent such temperature decrease, the energy change is:

[tex]Q=14.4g*0.900\frac{J}{g\°C}(23.0\°C-39.5\°C)\\\\Q=-213.84J[/tex]

Which is an outlet energy flow.

Best regards!

Answer:

0.53 atm

Explanation:

First we have to obtain the number of moles of each gas.

Number of moles of Ne = 10g/20g/mol = 0.5 moles

Number of moles of Ar = 10 g/40 g/mol = 0.25 moles

Total number of moles = 0.5 moles + 0.25 moles = 0.75 moles

Partial pressure of Ar = number of moles of Ar/Total number of moles * total pressure

Partial pressure of Ar = 0.25 moles/ 0.75 moles * 1.60 atm

Partial pressure of Ar = 0.53 atm

Answer:

π = 7.33atm

Explanation:

Osmotic pressure is defined as the pressure that must be applied to stop the mass transfer when a semipermeable membrane separates it of pure water. The equation is:

π = M×R×T

Where P is osmotic pressure

M is molar mass = 0.30M

R is gas constant = 0.082atmL/molK

And T is absolute temperature = 25°C + 273.15 = 298.15K

π = 0.30M×0.082atmL/molK×298.15K

Osmotic pressure of human blood at 25 degree C or at absolute temperature is equal to 7.33 atm.

What is osmotic pressure?

It is defined as the minimum pressure exerted on the solution, which is required to stop the flow of pure solvent from low concentration to high concentration through the semi permeable membrane.

Osmotic pressure can be calculted as :

P = M × R × T

Where, P = Osmotic pressure

M = Molar mass = 0.30 M (given)

R = Universal gas constant = 0.082 atmL/molK

T = Absolute temperature 25 degree C = 25⁰C + 273.15 = 298.15 K

Putting all these values in the given equation, we get:

P = 0.30 × 0.082 × 298.15 = 7.33 atm

Hence, 7.33 atm is the osmotic pressure of blood at 25⁰C .

To know more about osmotic pressure, do visit below link:

https://brainly.com/question/4203774