What will weigh more when a chemical change is complete? The reactants before the
chemical reaction, or the product after the reaction is complete?

A.The reactant will
weigh more than
the product

B. They both will loose
mass after the
reaction

C. They both will weigh
the same

D.The product always
weighs more than
the reactant

Plzzz Hurry!!!!! This is urgent

Riley Greene

Initial prediction : CH_4+O_2 transfers to CO_2+H_2O

Initial Explanation :

The products of this reaction are CO_2 and H_2O. These elements are Carbon Dioxide and Water. Atom's chemical properties are determined by the number of electrons in its outermost shells. Based on the number of electrons in the shells, it decides the reactivity of atoms. Atoms with the same number of electrons in the outer shells have similar chemical properties. If atoms have 1,2 or 3 valence electrons they react by giving out those electrons to become stable. If atoms have 6 or 7 electrons in the outer shell they react by taking in electrons to complete its outer shell.

So Methane has 8 valence electrons while Oxygen has 6. One molecule of methane combined with two oxygen molecules, react to form a carbon dioxide molecule, and two water molecules usually given off as steam or water vapor during the reaction and energy.

In the reaction, the bonds in the methane and oxygen come apart, the atoms rearrange and then re-bond to form water and carbon dioxide.The reactants are on the left side of the equation and the products are on the right. In the reaction, the bonds in the methane and oxygen come apart, the atoms rearrange and then re-bond to form water and carbon dioxide. No new atoms are created and no atoms are destroyed. This reaction is a combustion reaction.

Dot diagram Attached....

Revised prediction : CH_4+O_2 transfers to CO_2+H_2O

Revised Explanation : I was correct initially so I put the same explanation.

The products of this reaction are CO_2 and H_2O. These elements are Carbon Dioxide and Water. Atom's chemical properties are determined by the number of electrons in its outermost shells. Based on the number of electrons in the shells, it decides the reactivity of atoms. Atoms with the same number of electrons in the outer shells have similar chemical properties. If atoms have 1,2 or 3 valence electrons they react by giving out those electrons to become stable. If atoms have 6 or 7 electrons in the outer shell they react by taking in electrons to complete its outer shell.

So Methane has 8 valence electrons while Oxygen has 6. One molecule of methane combined with two oxygen molecules, react to form a carbon dioxide molecule, and two water molecules usually given off as steam or water vapor during the reaction and energy.

In the reaction, the bonds in the methane and oxygen come apart, the atoms rearrange and then re-bond to form water and carbon dioxide.The reactants are on the left side of the equation and the products are on the right. In the reaction, the bonds in the methane and oxygen come apart, the atoms rearrange and then re-bond to form water and carbon dioxide. No new atoms are created and no atoms are destroyed. This reaction is a combustion reaction.

The reaction as shown is a combustion reaction.

The reaction; CH4 + O2 ---> CO2 + 2H2O2 is a combustion reaction because methane reacts with oxygen to yield carbon dioxide and water. Carbon is always tetravalent in its compounds hence there are four carbon oxygen bonds in the product. Lets recall that the bonds in CH4 re nonpolar because of the minimal electronegativity difference between carbon and hydrogen. Even though the bond in CO2 is polar but the eneitire molecule is nonpolar because the dipoles cancel out. Water is a polar molecule.

Hydrogen forms only one bond hence in water molecule, each hydrogen atom is bonded to a central oxygen atom. All the bonds in water and carbon dioxide as well as in methane and oxygen are covalent.

Learn more: https://brainly.com/question/14283892

Answer:

Nitrogen is the limiting reactant, and  

3.74

grams of ammonia is formed.

Explanation:

We have the familiar Haber process equation...

N

2

(

g

)

+

3

H

2

(

g

)

⇌

2

N

H

3

(

g

)

Since the mole ratio of  

N

2

to  

H

2

is  

1

:

3

, then for every mole of nitrogen, we would need three moles of hydrogen.

Explanation:

Answer:

2×10⁻⁴

Explanation:

Given data:

2.8 ×10⁻⁶ + 1.4×10⁻²

Solution:

2.8 ×10⁻⁶ + 1.4×10⁻²

2×10⁻⁶⁺²

2×10⁻⁴

Scientific notation is the way to express the large value in short form.

The number in scientific notation have two parts.

. The digits (decimal point will place after first digit)

× 10 ( the power which put the decimal point where it should be)

for example the number 6324.4 in scientific notation will be written as = 6.3244 × 10³

Answer:

P₂ = 261 KPa

Explanation:

Given data:

Volume of sample = 200 mL

Initial pressure = 110 KPa

Initial temperature = 275 K

Final volume = 95 mL

Final temperature = 310 K

Final pressure = ?

Solution:

Formula:

P₁V₁/T₁ = P₂V₂/T₂

P₂ = P₁V₁T₂ /T₁ V₂

P₂ = 110 KPa× 200 mL× 310 K /275 K  × 95 mL

P₂ = 6820000 KPa / 26125

P₂ = 261 KPa

Answer:

4.87×10²⁴ molecules

Explanation:

Given data:

Mass of glucose = 1456 g

Number of molecules = ?

Solution:

Number of moles of glucose:

Number of moles = mass/molar mass

Number of moles = 1456 g/ 180.156 g/mol

Number of moles = 8.1 mol

1 mole of glucose contain 6.022×10²³ molecules

8.1 mol × 6.022×10²³ molecules / 1 mol

48.7×10²³ molecules

4.87×10²⁴ molecules

Answer:

[Kr] 4d10 5s2 5p4 is the electronic configuration for tellurium.

Electrons per shell: 2,8,18,18,6

Atomic number: 52

Symbol: Te

Answer:

+1

Explanation:

Electrochemistry. In oxidation–reduction (redox) reactions, electrons are transferred from one A redox reaction is balanced when the number of electrons lost by the reductant Hg(l)∣Hg2Cl2(s)∣Cl−(aq) ∥ Cd2+(aq)∣Cd(s).

As is evident from the Stock number, mercury has an oxidation state of +1. This makes sense, as chlorine usually has an oxidation state of -1.

The  oxidation state of Hg in Hg₂Cl₂ compound is +1 as both subscripts of elements are eliminated.

Compound is defined as a chemical substance made up of identical molecules containing atoms from more than one type of chemical element.

Molecule consisting atoms of only one element is not called compound.It is transformed into new substances during chemical reactions. There are four major types of compounds depending on chemical bonding present in them.They are:

1)Molecular compounds where in atoms are joined by covalent bonds.

2) ionic compounds where atoms are joined by ionic bond.

3)Inter-metallic compounds where atoms are held by metallic bonds

4) co-ordination complexes where atoms are held by co-ordinate bonds.

They have a unique chemical structure held together by chemical bonds Compounds have different properties as those of elements because when a compound is formed the properties of the substance are totally altered.

Learn more about compounds,here:

https://brainly.com/question/13516179

#SPJ2

Answer:

Shearing commonly occurs along the edges of tectonic plates, although it may occur in other places as well. Most often it takes place between 10 and 20 kilometers beneath the earth's surface. If the same process occurred at the surface, it would result in fracturing and faulting.

Explanation:

Answer:

Now if u could give us all the questions u got right! lol 8

Explanation:

Answer:

26

Explanation:

Given parameters:

Number of neutrons  = 14

Unknown:

Mass number  = ?

Solution:

The mass number of an atom is the sum of protons and neutrons in the atom.

 mass number = number of protons + number of neutrons

Since the atom here is magnesium, number of protons is 12

Mass number = 14 + 12  = 26

Answer:

A. Hot water increases the collision rate of the molecules, causing the

reaction to occur faster.

Explanation:

Hot water molecules move faster than cold water molecules.

Answer:

2 moles NH3 = 1 mole of N2

3 moles of H2 = 1 mole of N2

3 moles of H2 = 2 moles of NH3

Explanation:

The balanced equation for the reaction is given below:

N2 + 3H2 —> 2NH3

From the balanced equation above,

1 mole of N2 reacted with 3 moles of H2 to produce 2 moles of NH3.

Thus, we can say that:

1 mole of N2 = 3 moles of H2

1 mole of N2 = 2 moles of NH3

3 moles of H2 = 2 moles of NH3

Thus, considering the options given above, the right answers to the question are:

2 moles NH3 = 1 mole of N2

3 moles of H2 = 1 mole of N2

3 moles of H2 = 2 moles of NH3

Answer:

3 h2=2nh3

2nh3=1n2

3h2=1n2

Explanation:

Answer:

Solution!

Explanation:

Becuase the water didn't change when the sugar was mixed in. :)

Answer:

c and o

Explanation:

Carbon and Oxygen cannot react to form an ionic compound because the two elements are non-metals.

The pair of elements that could not react to form an ionic compound is C and O. Thus option B is correct.

Ionic compounds are formed by the electrostatic interaction of the metal atom with a non-metal. The ionic bonds are weaker bonds and are easily dissociated in the water.

The ionic compounds can be:

The pair of elements that could not react to form an ionic compound is C and O. Thus option B is correct.

For more information about the ionic compound, refer to the link:

https://brainly.com/question/9167977

Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.

Explanation: Have a blessed day!

Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.

Explanation:hope this helps u

Answer:

5 atoms

Explanation:

it has 4 hydro atoms and 1 nitrogen atom therefore it is 5

Answer:

the answer is 14

Explanation:

i just took the test on  Edg an i got it right

Answer:

16875 Joules

Kg m^2 s^-2 = Joule ,so The kinetic energy of a body of mass 150 Kg moving at 15m/s is 16875 Joules.

Explanation:

Explanation:

A delta is a process that forms by river deposition into an ocean or marine environment.

Answer:

F,Cl,I,BR

Explanation:

There all non-metals

The chemical and physical properties of Fluorine, Chlorine, Bromine, and Iodine have been similar. Thus option B is correct.

The physical and chemical properties of the elements have been based on the presence of the valence electrons in the element. The valence electrons are responsible for the reactivity of the element, and thereby the physical and chemical properties.

The elements belonging to the same group have been consisted of the same number of valence electrons, and thereby possess similar chemical and physical properties.

In the given set of options, Fluorine, Chlorine, Bromine, and Iodine have been belonging to the same group 17, and all have 7 valence electrons. The chemical and physical properties of these elements have been similar. Thus option B is correct.

For more information about the physical and chemical properties, refer to the link:

https://brainly.com/question/5186976

Answer:

Melting of ice

Explanation:

A physical change is one in which just the physical properties of the matter is altered. Most phase changes reaction falls under this type of change.

Answer:

We have nerves that are just like wires that run through our body that tells us what is going on and what to do about it. The hard dive like in a computer is our brain, which is made up of three parts that control things like coordination, movement, involuntary, and voluntary movement. The sensory numerous just like the keys in a computer pick up what we are doing in life.

Explanation:

Answer:

C3H6 + Br2 → C3H6Br2

Explanation:

The reaction in which C3H6Br2 (1,2-Dibromopropane) is created is:

We can see that the only difference between the product (C3H6Br2) and the known reactant (C3H6) of the reaction is two bromine atoms (Br2). Br2 is diatomic bromine - a molecule we get after combining two bromine atoms. This compound is a red-brown liquid at room temperature, which means that that is the liquid described in your question.

Answer:

B

Explanation:

Boron has 5 protons.

they become liquified

Answer:Delta

Explanation:

Answer:

²⁸Mg

Explanation:

12 electrons means it is a Mg;

A typical Mg has 12 neutrons, but this has 16 hence it must be an isotope with 4 extra neutrons.

Answer:

20cm=the length of the causation that it loads about the contrasting of the solution it is an easy question to answer it just has too many parts I answered one and I hope it helped to give you a hint towards solving the whole thing good luck

Explanation:

I tried!

In a titration, 20 cm3 of 2.0 mole dm-3 HCl reacted with 25 cm3 of NaOH. The concentration of the sodium hydroxide is 1.6 mole.

Titration  is defined as the procedure of determining the quantity of some ingredient of a sample by introducing a precisely known quantity of another substance to the measured sample with whereby the desired ingredient interacts in a predictable manner.

There are basically four type of titration.

M1V1 = M2V2

The concentration of the sodium hydroxide

M2 = M1V1 / V2

M2 = 2.0 x 20 / 25

M2 = 1.6 mole

The concentration of the sodium hydroxide = 0.08 mole

The concentration of the sodium hydroxide = 0.12 mole

The concentration of the sodium hydroxide  = 0.912 mole

Thus, in a titration, 20 cm3 of 2.0 mole dm-3 HCl reacted with 25 cm3 of NaOH. The concentration of the sodium hydroxide is 1.6 mole.  

To learn more about titration, refer to the link below:

https://brainly.com/question/2728613

#SPJ2

Answer:

Explanation: