Answer:
chemical energy
Explanation:
Photosynthesis is the process plants and some algae use to convert light energy to chemical energy stored as sugar within chloroplasts -- the energy factories found in plant cells.
A runner wants to run 10.4 km k m . She knows that her running pace is 8.0 mi/h m i / h .
Answer:
Approximately 49 minutes.
Explanation:
1 mile = 1.6 km
So 8.0 x 1.6 km
Minutes required: [tex]\frac{10.4 times 60 }{8.0 times 1.6}[/tex]= 48.75 minutes
I hope this helped :)
Calculate the change in entropy when 10.0 g of CO2 isothermally expands from a volume of 6.15 L to 11.5 L. Assume that the gas behaves ideally.
Answer:
The change in entropy of the carbon dioxide is [tex]1.183\times 10^{-3}[/tex] kilojoules per Kelvin.
Explanation:
By assuming that carbon dioxide behaves ideally, the change in entropy ([tex]\Delta S[/tex]), measured in kilojoules per Kelvin, is defined by the following expression:
[tex]\Delta S = m\cdot \bar c_{v}\cdot \ln \frac{T_{f}}{T_{o}}+m\cdot \frac{R_{u}}{M}\cdot \ln \frac{V_{f}}{V_{o}}[/tex] (1)
Where:
[tex]m[/tex] - Mass of the gas, measured in kilograms.
[tex]\bar c_{v}[/tex] - Isochoric specific heat of the gas, measured in kilojoules per kilogram-Kelvin.
[tex]T_{o}[/tex], [tex]T_{f}[/tex] - Initial and final temperatures of the gas, measured in Kelvin.
[tex]V_{o}[/tex], [tex]V_{f}[/tex] - Initial and final volumes of the gas, measured in liters.
[tex]R_{u}[/tex] - Ideal gas constant, measured in kilopascal-cubic meter per kilomole-Kelvin.
[tex]M[/tex] - Molar mass, measured in kilograms per kilomole.
If we know that [tex]T_{o} = T_{f}[/tex], [tex]m = 0.010\,kg[/tex], [tex]R_{u} = 8.315\,\frac{kPa\cdot m^{3}}{kmol\cdot K}[/tex], [tex]M = 44.010\,\frac{kg}{kmol}[/tex], [tex]V_{o} = 6.15\,L[/tex] and [tex]V_{f} = 11.5\,L[/tex], then the change in entropy of the carbon dioxide is:
[tex]\Delta S = \left[\frac{ (0.010\,kg)\cdot \left(8.315\,\frac{kPa\cdot m^{3}}{kmol\cdot K} \right)}{44.010\,\frac{kg}{kmol} } \right]\cdot \ln \left(\frac{11.5\,L}{6.15\,L}\right)[/tex]
[tex]\Delta S = 1.183\times 10^{-3}\,\frac{kJ}{K}[/tex]
The change in entropy of the carbon dioxide is [tex]1.183\times 10^{-3}[/tex] kilojoules per Kelvin.
A reaction has a theoretical yield of 124.3 g SF6, but only 113.7 g SF6 are obtained in the lab, what is the percent yield of SF6 for this reaction?
Answer:
Percent yield = 91%
Explanation:
Given data:
Theoretical yield of SF₆ = 124.3 G
Actual yield of SF₆ = 113.7 g
Percent yield of SF₆ = ?
Solution:
Formula:
Percent yield = (actual yield / theoretical yield)× 100
By putting values,
Percent yield = (113.7 g/ 124.3 g) × 100
Percent yield = 0.91 × 100
Percent yield = 91%
Calculate the number of hydrogen atoms in a sample of hydrazine . Be sure your answer has a unit symbol if necessary, and round it to significant digits.
Answer:
[tex]atoms \ H= 9.767x10^{24}atoms[/tex]
Explanation:
Hello!
In this case, considering that the mass of hydrazine is missing, we can assume it is 130.0 g (a problem found on ethernet). In such a way, since we need a mass-mole-atoms relationship by which we can compute moles of hydrazine given its molar mass (32.06 g/mol), then the moles of hydrogen considering one mole of hydrazine has four moles of hydrogen and one mole of hydrogen has 6.022x10²³ atoms (Avogadro's number); therefore, we proceed as shown below:
[tex]atoms \ H=130.0gN_2H_4*\frac{1molN_2H_4}{32.06gN_2H_4} *\frac{4molH}{1molN_2H_4} *\frac{6.022x10^{23}atoms}{1molH}\\\\atoms \ H= 9.767x10^{24}atoms[/tex]
Notice 130.0 g has four significant figures, therefore the result is displayed with four as well.
Best regards!
determine moles of 1.5g of sodium carbonate.
Answer:
0.014mol
Explanation:
Given parameters:
Mass of Na₂CO₃ = 1.5g
Unknown:
Number of moles = ?
Solution:
Number of moles of a compound is mathematically expressed as;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass of Na₂CO₃ = 2(23) + 12 + 3(16) = 106g/mol
Number of moles = [tex]\frac{1.5}{106}[/tex] = 0.014mol
Determine the molecular geometry for ClF3ClF3.
a. seesaw
b. trigonal bipyramidal
c. square pyramidal
d. octahedral
Answer:
The correct option is b
Explanation:
Firstly, the compound is ClF₃ and not ClF₃ClF₃. The name of the compound ClF₃ is chlorine trifluoride. It's electron geometry is trigonal bipyramidal (with the chlorine at the center and the atoms of the fluorine forming a triangular bipyramid around it) with a bond angle of 175° with an hybridization of sp³d.
how is black oxide converted into red oxide
Answer:
The usual way of converting black oxide to red oxide involves treating the black oxide with sulphuric acid and then roasting the intermediate product thus formed. lt is known that the amount of acid can be considerably less than the stoichiometric amount needed to convert all the black oxide to a sulphate.
Hope it helps :9
What is the normality of a solution prepared by dissolving 75.0 g citric acid, a triprotic acid with molar mass of 192.14 g, in water to make 250. mL solution?
a. 0.0576 N
b. 0.293 N
c. 4.68 N
d. 0.173 N
e. 1.56 N
The normality of the solution which is prepared by dissolving 75 grams of citric acid in water to make 250 ml solution is 4.68 N. Thus, the correct option is C.
What is Normality?Normality is a measure of the concentration of a solution. Normality of a solution is the number of grams equivalent to solute which is present in a given volume of the solution.
Normality of a solution can be calculated by the formula:
N = Gram eq. of solution/ Volume of solution in liters
N = Weight of the solution/ Equivalent weight ×1000/ Volume of solution
N = 75/ 64.4 × 1000/ 250
N = 1.16 × 4
N = 4.64
The normality of the citric acid solution is approximately 4.68 N.
Therefore, the correct option is C.
Learn more about Normality here:
https://brainly.com/question/5558330
#SPJ5
what is the number of each element and the total number of atoms for vinegar?
how many moles of NaCl are dissolved in 250 mL of solution if the solution concentration is 0.150 M?
Answer: ?L=250 mL × 1L =0.25L 1000 mL
0.150 M = moles of solute moles of solute = 0.038 mol.
Explanation:
My dog is gonna explode in 20 minutes help!!
Answer:
Call 911 then or run away
Explanation:
What is the correct electron configuration for an element with 5 electrons in
the 3d energy sublevel?
Answer:
[tex]1s^2,2s^2,2p^6,3s^2,3p^6,4s^2,3d^5[/tex]
Explanation:
Hello!
In this case, since electron configurations allows to understand how the electrons in an atoms are arranged depending on the energy levels from 1 to 7 and subshells s, p d and f, considering the attached picture, if we want an element for which the last term in its electrons configuration was 3d⁵, we write:
[tex]1s^2,2s^2,2p^6,3s^2,3p^6,4s^2,3d^5[/tex]
It means that the element has 25 electrons, therefore, it should be manganese.
Best regards!
Answer: it's A the same answer as the dude above me not trying to type all that
Explanation: took the test for ap
What do chemical compounds want to obey?
Answer:
Their atoms obey the octet rule
Explanation:
Chemical compounds are formed when atoms combine with one another in order to comply with the octet rule. The octet configuration gives an atom stability in electronic structure.
When atoms become isoelectronic with noble gases, it confers a special stability on them. Therefore, to attain this state, they gain or lose electron or share their electrons with other species.1 What is the total number of valence electrons in the Lewis structure of C104?
electrons
2 Draw a Lewis structure for CI04:
A solid substance was tested in the laboratory. The test results are listed below: 1.) dissolves in water 2.) is an electrolyte 3.) melts at a high temperature. Based on these results, the solid substance could be
Answer:
NaCl may be i guess so....
the eye is a substance of which major body system
Answer:
the visual system would be the answer
According to VSEPR theory, a molecule with the general formula AX4 E1 will have a __________ molecular shape.a. T-shaped square planar b. seesaw c. trigonal planar d. trigonal bipyramidal e. tetrahedral
Answer:
The answer is "Option e"
Explanation:
The ionic bond arousal system of the outer shells (VSEPR) allows us to determine which one of the feasible solutions are found in the majority of instances. It's also supposed to occupy the space with electrical pairs and also to reduce electrical couple repulsive forces to a minimum, its cheapest electricity framework. This theory can be used for predicting a form of electron pairs with a different mass of a particle's core electrons.
A carbocation is an example of a(an) ____. Does a carbocation accept a pair of electrons, or does it donate a pair of electrons?
A. Electrophile. The carbocation accepts a pair of electrons.
B. Nucleophile. The carbocation accepts a pair of electrons.
C. Electrophile. The carbocation donates a pair of electrons.
D. Nucleophile. The carbocation donates a pair of electrons.
Answer:
Option A. The carbocation accepts a pair of electrons.
Explanation:
A carbocation is defined as a positively charged carbon, which is bound to 3 substituents. Since it has no electrons nonbonding, it only has six electrons in its valence shell. With only six electrons in its valence shell, a carbocation is a powerful electrophile (and Lewis acid) and can react with any nucleophile that is found.
Carbocations are proposed as intermediates in many organic reactions. They also work like free radicals, which are electron-deficient species.
Same as free radicals, the carbocations are stabilized by alkyl substituents.
What would the molecular formula be if potassium and chlorine reacted to form a neutral compound?
compound is formed when potassium reacts with chlorine, which forms ions with a negative charge. The formula of this compound would therefore be KCl.
The molecular formula if potassium and chlorine reacted to form a neutral compound will be KCI.
What happens to potassium if it reacts to chlorine?Potassium metal, K, will burn in the presence of chlorine gas,[tex]Cl_{2}[/tex], to form potassium chloride, KCl, an ionic compound.The chemical equation of this is [tex]2K_{aq}[/tex] + [tex]Cl_{2}[/tex]g→[tex]2KCL_{s}[/tex]We can also picture this reaction as being a redox reaction.When potassium metal is oxidized by chlorine gas to potassium cations, chlorine gas will be reduced to chlorine anions.The potassium cations and the chlorine anions will be combined to produce potassium chloride.To learn about potassium and chlorine reactions, refer to: https://brainly.com/question/20690183
#SPJ2
What happens to gas particles when they are compressed?
1)Gas molecules move further apart.
2)Gas molecules get closer together.
3)Some gas molecules move further apart and some move closer together.
Answer:
3)Some gas molecules move further apart and some move closer together.
Explanation:
because When more gas particles enter a container, there is less space for the particles to spread out, and they become compressed. The particles exert more force on the interior volume of the container. This force is called pressure. There are several units used to express pressure.
Bob uses SI units to measure his running distance. Which units should he use
Answer:
Distance measures length. For example, the distance of a road is how long the road is. In the metric system of measurement, the most common units of distance are millimeters, centimeters, meters, and kilometers.
Explanation:
Construction crews sometimes use this reaction for welding underwater structures:
Fe2O3 + 2Al → Al2O3 + 2Fe
How many moles of iron (Fe) would be produced if 2.50 mol Fe2O3 react? Make sure to use the correct number of significant figures in your answer.
2.50 mol Fe2O3 =
Answer:
5 moles of iron formed
Explanation:
Given data:
Moles of iron formed = ?
Moles of iron oxide react = 2.50 mol
Solution:
Chemical equation:
Fe₂O₃ + 2Al → Al₂O₃ + 2Fe
Now we will compare the moles of iron with iron oxide.
Fe₂O₃ : Fe
1 ; 2
2.50 : 2×2.50 = 5 mol
The complete combustion of C4H10, will require how many moles of oxygen, O2? ________.
Answer:
2
Explanation:
C⁴H¹⁰ + 2O² —> 4CH²O + H²
The hybrid orbital set used by the central atom in no3- is_____ and why?
a. sp
b. sp3
c. SP2
d. sp3d2
e. sp3d
Answer:
c. SP2
Explanation:
The image in the diagram below shows the structure of NO₃⁻
Nitrogen is the central atom with the electronic configuration of 1s² 2s² 2p³.
So in its outermost shell, it has 3 electrons and the hybridization is sp²
However,
According to Hund's rule:
The ground state of Nitrogen is;
1s² 2s² 2p³
↑↓ ↑ ↑ ↑ ↑
At the excited state when it is attached to 3 different oxygen ions, we have:
1s² 2s² 2p⁵
O⁻ ---> ↑↓ ↑↓ ↑↓ ↑↓ ↑
1s² 2s² 2p⁵
O⁻ ---> ↑↓ ↑↓ ↑↓ ↑↓ ↑
1s² 2s² 2p⁴
O⁻ ---> ↑↓ ↑↓ ↑↓ ↑ ↑
Thus, the 3 sp² orbital lies in a plane and form 3 N - O σ- bond and one π- bond.
Which trophic level has the most calorie count
Answer:
producer
Explanation:
The trophic level with the most calorie count is the producer.
A trophic level is a hierarchical level of the food chain with each level consisting of organisms that share the same feeding role in the ecosystem. A typical trophic level consists of the producers which occupy the base level, the primary, secondary, tertiary consumers respectively, and the decomposers.
The highest amount of energy exists at the base of the trophic level and decreases as we move up the trophic level, forming a kind of pyramid at the end. The producers have the highest amount of energy by directly converting energy from the sun to chemical energy. The consumers at subsequent levels are only able to utilize only about 10% of the chemical energy in their own foods.
In the electron dot diagram for sulfur monoxide, each atom of sulfur will have how many unshared pairs of electrons an each atom of oxygen will have how many unshared pairs of electrons.
Answer:
Both sulphur and oxygen have two unshared pairs of electrons
Explanation:
The compound sulphur monoxide has the formula S=O. It is quite analogous to the diatomic molecules of the group 16 elements.
We must remember that each group element has six electrons in their outermost shell. Two of these are lone pairs leaving only two electrons available for bond formation.
These two electrons are used to form the sigma and pi bonds in S=O, leaving two lone pairs on each of sulphur and oxygen atoms.
Which of these is NOT evidence that a chemical change has taken place?
temperature rising when 2 substances are mixed
gas production
color change
melting
element is responsible for the color of light produced.
13
In a flame test, the
a Non-metal
b. Metal
c. Halogen
d. Noble Gas
1. Use the table to
Answer: d
Explanation:because it makes sence i think
Fill in the Blank
Complete the following sentence. Remember to spell correctly.
The most common biomass is
which people have used to heat their homes for centuries.
Calculate the number of S atoms in 0.670 mole of S.
Answer:
4.03 × 10²³ atomsExplanation:
The number of S atoms can be found by using the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question we have
N = 0.67 × 6.02 × 10²³
We have the final answer as
4.03 × 10²³ atomsHope this helps you