Answer:
Explanation:
Molecular weight of barium sulphide = 169
500 mL of .192 M barium sulfide = .5 x .192 moles of barium sulphide
= .096 moles of barium sulfide
= .096 x 169 gram of barium sulfide
= 16.22 grams of barium sulfide .
We shall have to add 16.22 gram .
What are two weather factors that are directly influenced by ocean currents
O Air density and humidity
O Air pressure and temperature
O Temperature and humidity
O Precipitation and air pressure
Explanation:
Preciptation and air pressure
Answer:
It is Temperature and humidity. C
Explanation:
I took the test and it said it was C
1. Which statement describes a compound?
A. It contains a solute.
B. Its composition can vary.
C. Its combination of atoms never changes.
D. Its components keep separate properties.
2. Which item is NOT a type of matter?
A. force
B. mixture
C. element
D. compound
3. Which combination can be used to classify all the matter on Earth?
A. forces and energy
B. atoms and elements
C. solvents and solutes
D. substances and mixtures
The last column of the periodic table contains the noble gases, elements that do not easily form chemical bonds. why don’t these gases tend to form chemical bonds?
PLS HELPPP I WILL MARK BRAINLESY
HELPP GIVING AWAY 30 POINTS!!!!!
Determine Your family wants to use
renewable energy to heat your home. Which
renewable energy resource is best suited to
your area? Explain your answer.
Answer:
wood
Explanation:
i can take the seds from the trees to row new trees and still use the wood without causing deforestation
This element has 4 more protons than Silicon
Answer:
Argon would be the correct choice.
Explanation:
Silicon has a total of 14 protons. If 4 protons would be added, you would now have argon, the 18th element.
In which atmospheric layer is the ozone layer?
A.troposphere
B.mesosphere
C.stratosphere
D.thermosphere
Answer:
stratosphere
Explanation:
contains a high concentration of ozone in relation to other parts of the atmosphere, although still small in relation to other gases in the stratosphere.
Answer:
stratosphere
Explanation: Most atmospheric ozone is concentrated in a layer in the stratosphere, about 9 to 18 miles (15 to 30 km) above the Earth's surface. Ozone is a molecule that contains three oxygen atoms.
A chemical engineer must calculate the maximum safe operating temperature of a high-pressure gas reaction vessel. The vessel is a stainless-steel cylinder that measures 41.0cm wide and 49.2cm high. The maximum safe pressure inside the vessel has been measured to be 3.70MPa. For a certain reaction the vessel may contain up to 2.50kg of dinitrogen difluoride gas.
Required:
Calculate the maximum safe operating temperature the engineer should recommend for this reaction. Write your answer in degrees Celsius. Be sure your answer has the correct number of significant digits.
Answer:
[tex]T=2.78x10^3 \°C[/tex]
Explanation:
Hello,
In this case, considering that the safe temperature may be computed via the ideal gas law as we now the pressure, mass and volume via the dimensions:
[tex]V=\pi r^2 h=\pi *(41.0cm)^2*49.2cm=2.60x10^5cm^3*\frac{1L}{1000cm^3} =260L[/tex]
The pressure in atm is:
[tex]P=3.70MPa*\frac{1x10^6Pa}{1MPa} \frac{1atm}{101325Pa} =36.5atm[/tex]
And the moles considering the mass and molar mass (66 g/mol) of dinitrogen difluoride (N₂F₂):
[tex]n_{N_2F_2}=2.50kg*\frac{1000g}{1kg}*\frac{1mol}{66g} =37.9mol[/tex]
In sich a way, by applying the ideal gas equation, which is not the best assumption but could work as an approximation due to the high temperature, the temperature, with three significant figures, will be:
[tex]T=\frac{PV}{nR}=\frac{36.5Pa*260L}{37.9mol*0.082\frac{atm*L}{mol*K} }\\ \\T=3053.6K-273.15\\\\T=2.78x10^3 \°C[/tex]
Best regards.
The equilibrium constant _____________. For an ___________ reaction, heat is a reactant. An increase in temperature and heat favors the ____________ reaction and the value of K c _____________.
Answer:
The equilibrium constant change. For an endothermic reaction, heat is a reactant. An increase in temperature and heat favors the forward reaction and the value of Kc increases.
Explanation:
Hello.
In this case, regarding reactions in equilibrium in which heat is a reactant as those exemplified by:
[tex]Heat+Reactants \rightleftharpoons Products[/tex]
We infer that the heat of reaction is positive since the reactants have more energy in their ground state than the products making them endothermic. Moreover, since the Le' Chatelier's principle states that increasing the reaction temperature in endothermic reactions, the forward reaction (towards products) is favored because endothermic reactions absorb heat in the form temperature raise, the required statement is:
The equilibrium constant change. For an endothermic reaction, heat is a reactant. An increase in temperature and heat favors the forward reaction and the value of Kc increases.
Regards.
Answer:
The equilibrium constant increases. For an endothermic reaction heat is a reactant. An increase in temperature and heat favours the forward reaction and the value of KC increases.
Explanation:
What is the density of a liquid with the same mass as in problem d, if it has a volume of 43.2 mL?
(part d: A liquid has a volume of 62.7 mL and a density of 2.59 g/mL. What is its mass?)
Answer:
3.76
Explanation:
You start by finding the mass of part d. Mass= Density times Volume.In this case you would multiply 62.7 and 2.59 which is 162.393 rounded is 162.4. Then density= mass/ volume which is 162.4/ 43.2. density equals 3.76
Four grams of hydrogen react completely with 32 grams of oxygen. Based on the law of conservation of mass how many grams of water will be produced
Se producirán 36 gramos de agua
Explicación: Ya que en una reacción química no puede descubrir ningún cambio en masa total de las sustancias que en ella intervienen, pues en una reacción química ni se gana ni se pierde masa.
which of the two pure substance consists of different types of Element
Answer:Two Main Types of Pure Substances
Elements and compounds are the two types of pure substances. Examples of common elements include carbon, nitrogen and hydrogen. They consist of one type of atom and cannot break down into something else. Every pure carbon substance, for example, has the same particles in it.
Explanation:I think
Identify the change of state occurring in each situation. your friend's perfume producing an aroma that fills the room making ice cream from milk in an ice cream maker formation of frost on a cold windshield overnight wax dripping from a candle naphthalene solid (found in moth balls) producing fumes in the closet to deter moths your breath fogging up on your car windshield on a cold winter day
Answer:
The solution to this question can be defined as follows:
Explanation:
[tex]W_{ax}[/tex] Naphthalene falls off from candle something, strong fumes-sublimation produces. On a rainy day in winter, the breath fogging up on your cor's windshield. Brost formation on an overnight deposition on a frozen windshield. Making milk ice cream freezing the perfuming scent that fills the creation of the room.When nitrogen, oxygen, fluorine, sodium, magnesium and aluminum ionize, they all will have:
a. different electron configuration from each other.
b. an unchanged electron configuration.
c. the same charge.
d. the same electron configuration (isoelectronic) as neon.
[Definition: The word isoelectronic means that when you write out the electron configuration they are the same. An exam would be He and Li whereby both of them have 2 electrons and therefore they are both are 1s2 in their electron configurations.]
Answer:
the same electron configuration (isoelectronic) as neon.
Explanation:
The electron configuration refers to the distribution of electrons of an atom or molecule in atomic or molecular orbitals. Electronic configuration is also known as an electronic structure.
When nitrogen, oxygen, fluorine, sodium, magnesium and aluminum ionize, they all will have the same electron configuration (isoelectronic) as neon.
What is the density of a block of gold that occupies 1000 ml and has a mass of 3.5 kg? Show your work
Answer:
Density of block of gold is 3.5 g/cm³.
Explanation:
Given data:
Volume of block = 1000 mL
Mass of block = 3.5 kg (3.5×1000 = 3500 g)
Density of block = ?
Solution:
Density of substance is calculated by dividing the mass of substance over its volume.
Formula:
d = m/v
d = 3500 g/ 1000 mL
d = 3.5 g/mL
or
d = 3.5 g/cm³ (1ml = 1cm³)
You will need to balance this reaction
Na3PO4 +
CaCl2 → ? NaCl +_ Ca3(PO4)2
Answer:
2Na₃PO₄ + 3CaCl₂ → 6NaCl + Ca₃(PO₄)₂
Explanation:
Chemical equation:
Na₃PO₄ + CaCl₂ → NaCl + Ca₃(PO₄)₂
Balance chemical equation:
2Na₃PO₄ + 3CaCl₂ → 6NaCl + Ca₃(PO₄)₂
First step:
Na₃PO₄ + CaCl₂ → NaCl + Ca₃(PO₄)₂
Left hand side Right hand side
Na = 3 Na =1
P = 1 P = 2
O = 4 O = 8
Ca = 1 Ca = 3
Cl =2 Cl = 1
2nd step:
2Na₃PO₄ + CaCl₂ → NaCl + Ca₃(PO₄)₂
Left hand side Right hand side
Na = 6 Na =1
P = 2 P = 2
O = 8 O = 8
Ca = 1 Ca = 3
Cl =2 Cl = 1
3rd step:
2Na₃PO₄ + 3CaCl₂ → NaCl + Ca₃(PO₄)₂
Left hand side Right hand side
Na = 6 Na =1
P = 2 P = 2
O = 8 O = 8
Ca = 3 Ca = 3
Cl = 6 Cl = 1
3rd step:
2Na₃PO₄ + 3CaCl₂ → 6NaCl + Ca₃(PO₄)₂
Left hand side Right hand side
Na = 6 Na =6
P = 2 P = 2
O = 8 O = 8
Ca = 3 Ca = 3
Cl = 6 Cl = 6
The lewis dot notation for two atoms is shown. What is represented by this notation? K loses one portion to CI, K gains one portion from CI, K loses one electron to CI, K gains one electron from CI
Answer:
K loses one electron to CI
Explanation:
The lewis electron dot notation shows only the chemical symbol of the element surrounded by dots to represent the valence electrons.
We have atom of K with one valence electrons
Cl with 7 valence electrons
For an electrostatic attraction to occur, both particles must be charged. To do this, one of the species must lose an electron, and the other gains it.
This will make both species attain a stable octet;
Hence, K will lose 1 electron and Cl will gain the electrons.
Answer:
C: K loses one electron to CI
Explanation:
I took the test and got it correct!!
What types of materials are better at absorbing energy from radiation?
Answer:
Explanation:
Materials are clothes and heavy rope
When solid Fe metal is put into an aqueous solution of SnSO4, solid Sn metal and a solution of FeSO4 result. Write the net ionic equation for the reaction.
Answer:Fe(s) + Sn^2+(aq) ----> Fe^2+(aq) + Sn(s)
Explanation:
The net ionic equation involved is;
Fe(s) + Sn^2+(aq) ----> Fe^2+(aq) + Sn(s)
We must recall that iron is above tin in the electrochemical series. The implication of this is that, iron has a more negative reduction potential compared to tin.
A metal can displace metals below it in the electrochemical series from their aqeous solution. Hence, iron displaces tin from it's solution.
Which atom has exactly 15 protons?
Answer:
Phosphorus
Explanation:
What is the formula for the aqueous salt produced when hydroiodic acid is neutralized by potassium hydroxide?
Answer:
KOH(aq) + HCI(aq) -----> KCI(aq )+ H2O
base acid salt water
hope this helps :)
Explanation:
The formula for the aqueous salt produced when hydroiodic acid is neutralized by potassium hydroxide is KI. The neutralization reaction between hydroiodic acid and potassium hydroxide is given below.
HI(aq) + KOH(aq) → KI(aq) + H2O(l)
What is neutralization reaction?The reaction between acid and base to form salt and water is called neutralization reaction.
To learn more about neutralization reaction here.
https://brainly.com/question/13841223
#SPJ3
Which of the following contribute(s) to most of the mass of an atom? Question 5 options: A) Neutrons only B) Protons and electrons C) Protons and neutrons D) Protons only
Answer:
C
Explanation:
Hope this helps :)
Be sure to answer all parts.
Write a balanced equation for each reaction. Do not include states of matter to your equation.
H2 + O2 H20
Answer:
2H₂ + O₂ → 2H₂O
Explanation:
Chemical equation:
H₂ + O₂ → H₂O
Balance chemical equation:
2H₂ + O₂ → 2H₂O
Step 1:
H₂ + O₂ → H₂O
Left hand side Right hand side
H = 2 H = 2
O = 2 O = 1
Step 2:
H₂ + O₂ → 2H₂O
Left hand side Right hand side
H = 2 H = 4
O = 2 O = 2
Step 3:
2H₂ + O₂ → 2H₂O
Left hand side Right hand side
H = 4 H = 4
O = 2 O = 2
Use the data in the Successive Ionization Energies and Electron Affinity tables to determine the following. (Assume the values in the Successive Ionization Energies table are given to the ones place.) (a) the electron affinity of Ar2+ kJ/mol (b) the electron affinity of Si + kJ/mol (c) the ionization energy of Cl − kJ/mol (d) the ionization energy of Cl kJ/mol (e) the electron affinity of Cl + kJ/mol
Answer:
Use the data in the Successive Ionization Energies and Electron Affinity tables to determine the following. (Assume the values in the Successive Ionization Energies table are given to the ones place.)
(a)
the electron affinity of Ar2+
kJ/mol
(b)
the electron affinity of S+
kJ/mol
(c)
the ionization energy of Cl−
kJ/mol
(d)
the ionization energy of Cl
kJ/mol
(e)
the electron affinity of Cl+
kJ/mol
Successive Ionization Energies in Kilojoules per Mole for the Elements in Period 3 General increase 13 14 Element 11 12 I. 16
Explanation:
Methanol has a density of 0.79g/ml: Calculate the mass of 589ml of methanol.
Answer:
The answer is 465.31 gExplanation:
The mass of a substance when given the density and volume can be found by using the formula
mass = Density × volumeFrom the question we have
mass = 0.79 × 589
We have the final answer as
465.31 gHope this helps you
How many atoms are in caco4
Answer: 6
Explanation:
Which of the following is an Elementary compound?
A. CO2
B. N2
C. SO2
D. H2S
heeeeeeeeeelp please please please
Answer:
Explanation:
In my opinion the answer should be SO2
Answer:
a should be answer i think.
Which pair of elements would most likely have a similar arrangement of outer
electrons and have similar chemical behaviors?
boron and aluminum
helium and fluorine
carbon and nitrogen
chlorine and oxygen
Answer:
Boron and Aluminum
Explanation:
If you write the electron configuration for boron and aluminum, you get:
[tex]1s^22s^22p^1[/tex] for boron and [tex]1s^22s^22p^63s^23p^1[/tex] for aluminum. Both have 3 valance electrons and has 2 electrons in a s-orbital and 1 in a p-orbital. These valance electron similarities are based on the column/group the elements are. Therefore, Boron and Aluminum have similar chemical behaviours and similar arrangement of outer/valance electrons.
Calculate the density of the aluminum cylinder with a diameter 0f 1.3 cm weighing 18 grams. Height of the cylinder is 5.2 Cm. Find percent error (Actual density of Aluminum is 2.7 g/cm3). (Formula for volume of cylinder is πr2h)
Answer:
Percent error = 3.7%
Explanation:
Given data:
Density of Al cylinder = ?
Weight of cylinder = 18 g
Diameter = 1.3 cm
Height = 5.2 cm
Actual density of Al = 2.7 g/cm³
Percent error = ?
Solution:
First of all we will calculate the volume of cylinder through given formula.
V = πr²h
r = diameter /2
V = 22/7 × (0.65 cm)²× 5.2 cm
V = 22/7 × 0.4225cm²× 5.2 cm
V = 6.89 cm³
Now we will calculate the density.
d = m/v
d = 18 g/ 6.89 cm³
d = 2.6 g/cm³
Percent error:
Percent error = measured value - actual value /actual value × 100
Percent error = 2.6g/cm³ - 2.7g/cm³ /2.7g/cm³ × 100
Percent error = 3.7%
Negative sign shows that measured or experimental value is less than actual value.
Please help
What is an element
Answer:
An element is atoms with the same number of protons.
Explanation:
Protons, electrons, and neutrons.
Which phrase describes the element carbon-14?
We know that carbon -14 is a radioactive isotope of carbon
It is used in carbon dating to know the age of different forms of dead organism including plants...
So it is used for estimating the age of sedimentry rocks which contains dead debris of plants and animals,
it can be produced from N14 by radioactive reaction of N-14 with neutron.
It is found in organisms
Answer:
Found in organisms remains.
Explanation:
Hope this helped