Answers
Answer:
a i. The higher curve is "thick wall" and the lower curve is "thin wall".
a ii. The thicker the wall, the more time it takes to transfer the same amount of heat. Thus, the thick wall would have a less steep drop in temperature as it transferred lesser heat from the room to the surroundings and the thinner wall would have a steeper drop in temperature as it conducted more heat away from the room to the surroundings.
Related Questions
The UFP and LFP of a faulty Thermometer are 110 deg. C and -5 deg. C respectively. If this thermometer is used to measure the temperature of the liquid whose actual temperature is 50 deg. C, reading on the thermometer will be:
62.5 deg. C
57.5 deg. C
52.5 deg. C
42.5 deg. C
Answers
What distance was covered in the 1st 2 seconds?
A.0 m B. 4m
C. 2m C. 8m
Answers
Answer:
E
Explanation:
Elaphants and noodles+ramen and sushi
A car is driving down the road at 35 m/s when the driver slams on the brakes. The car stops in a distance of 75 meters. The braking force necessary to do this is 9,800 Newtons. How much work do the brakes perform stopping the car?
Answers
Answer:
If the car is initially travelling at u m/s, then the stopping distance d m travelled by ... the speed of the car at the instant the brakes are applied. ... Common usage will force us to depart from this later in the notes. ... The history of these equations is not absolutely clear, but we do have some ... Newton (1642–1727) and Leibniz.
Explanation:
hope this helped
If it takes Charlie .45 hrs walking at 2.5 km/hr to get to the chocolate factory and it takes Willy Wonka 25 hrs walking at 3.5 km/hr then who lives closer and by how far?
Answers
Answer:
6.4
Explanation:
trust
Which material rises from cracks in oceanic crust?
Answers
Answer:
trenchs and magma
Explanation:
Answer: Ridges form along cracks (divergent boundaries) in the oceanic crust (Molten rock (magma) rises through these cracks and pushes to both sides. When it cools, it forms new oceanic crust. The old crust is pushed away and new crust takes over. This is called Sea-Floor Spreading.
differentiate among the various forms of energy
Answers
Explanation:
Forms of energy
There are many different types of energy, which all fall into two primary forms – kinetic and potential. Energy can transform from one type to another, but it can never be destroyed or created.
Burning Questions
What are the different types of energy?
Types of energy can be categorised into two broad categories – kinetic energy (the energy of moving objects) and potential energy (energy that is stored). These are the two basic forms of energy. The different types of energy include thermal energy, radiant energy, chemical energy, nuclear energy, electrical energy, motion energy, sound energy, elastic energy and gravitational energy.
Discover the different types of energy
Thermal Energy
Thermal (Heat) Energy
Thermal energy is created from the vibration of atoms and molecules within substances. The faster they move, the more energy they possess and the hotter they become. Thermal energy is also called heat energy.
Let's go! >
Chemical Energy
Chemical Energy
Chemical energy is stored in the bonds of atoms and molecules – it is the energy that holds these particles together. Stored chemical energy is found in food, biomass, petroleum, and natural gas.
Let's go! >
Nuclear Energy
Nuclear Energy
Nuclear energy is stored in the nucleus of atoms. This energy is released when the nuclei are combined (fusion) or split apart (fission). Nuclear power plants split the nuclei of uranium atoms to produce electricity.
Let's go! >
Electrical Energy
Electrical Energy
Electrical energy is the movement of electrons (the tiny particles that makeup atoms, along with protons and neutrons). Electrons that move through a wire are called electricity. Lightning is another example of electrical energy.
Let's go! >
Radiant Energy
Radiant Energy
Also known as light energy or electromagnetic energy, radiant energy is a type of kinetic energy that travels in waves. Examples include the energy from the sun, x-rays, and radio waves.
Let's go! >
light Energy
Light Energy
Light energy is a form of electromagnetic radiation. Light consists of photons, which are produced when an object's atoms heat up. Light travels in waves and is the only form of energy visible to the human eye.
Let's go! >
Motion Energy
Motion Energy
Motion energy – or mechanical energy – is the energy stored in objects; as objects move faster, more energy is stored. Examples of motion energy include wind, a flowing river, a moving car, or a person running.
Let's go! >
Sound Energy
Sound Energy
Sound energy is the movement of energy through substances. It moves in waves and is produced when a force makes an object or substance vibrate. There is usually much less energy in sound than in other forms of energy.
Let's go! >
Elastic Energy
Elastic Energy
Elastic energy is a form of potential energy that is stored in an elastic object - such as a coiled spring or a stretched elastic band. Elastic objects store elastic energy when a force causes them to be stretched or squashed.
Let's go! >
Gravitational Energy
Gravitational Energy
Gravitational energy is a form of potential energy. It is an energy associated with gravity or gravitational force – in other words, the energy held by an object when it is in a high position compared to a lower position.
Let's go! >
What is the Law of Conservation of Energy?
While it might sound complex, the First Law of Conservation of energy simply states that energy can never be created or destroyed, but it can be transformed from one type to another.
What Do You Mean?
Types of Energy Diagram
Energy can be transformed from one form to another in different ways.
Kinetic energy is the energy of a moving object.
Potential energy is energy that is stored in an object or substance.
The Law of Conservation of energy is that energy can be transformed from one form to another, but can be neither created or destroyed.
Energy Transformations see diagram…
Notice that these energy transfer examples only show the useful energy transfers. However, car engines are also noisy (sound energy) and hot (thermal energy) and electric lamps also give out heat energy.
Cool Facts
The use of the word 'energy' dates all the way back to the 4th century BC.
Cool Facts
The word energy comes from the Greek word 'energeia', meaning 'activity.
Cool Facts
The use of the word 'energy' dates all the way back to the 4th century BC.
Cool Facts
The word energy comes from the Greek word 'energeia', meaning 'activity.
Speedy Summary
Energy transferred
Sunlight energy is converted into the chemical energy of glucose.
Energy comes in many different types, which can be categorised into two basic forms – kinetic and potential. Energy can never be created or destroyed, but it can be transformed from one type of energy to another.
Explanation:
jdkkevfdjkrvvgskcehfdgjkjfdgjjcbbxgjggrruoohgfdrhgh
May someone please help?
Air is cooled and
becomes
[denser/less dense).
Less dense air
[rises/sinks).
Denser air
(rises/sinks).
The process repeats, producing a
Air is heated and
becomes
[denser/less dense]
within the gas
Answers
Air is cooled and
becomes denser.
Denser air sinks.
The process repeats, producing a (i wasn't sure about this one)
Air is heated and becomes less dense.
Less dense air rises.
hope this helps!
In what way is a screw similar to an inclined plane?
-A screw and an inclined plane both have threads.
-A screw is put in place with a screwdriver, which is a wedge.
-A screw is an inclined plane wrapped around a cylinder.
Answers
Answer:
-A screw is an inclined plane wrapped around a cylinder.
Explanation:
Answer:
b
Explanation:
Can two objects be at the same distance from a single point but be in different positions? Why or why not?
Plsssss help meee
Answers
Answer:Position is an object's location in relation to a reference point. Yes. Both objects are one unit away (the same distance), but they occupy different locations in space because they are in different directions.
Explanation: Hope this helps!!
Yes it is possible for two objects be at the same distance from a single point but be in different positions.
We have two objects at the same distance from a single point but are in different positions.
We have to determine whether this statement is true or not.
What is a Reference frame?A reference frame can be considered as the coordinate frame with respect to origin of which the physical quantities such as velocity, displacement , acceleration etc. of any other object in different reference frame is measured.
According to the question -
YES, Two objects can have same distance from a single point or a reference point (say origin) and can be at different positions. For example - Two different points with Position vectors -
P(1) = i + j
P(2) = - i + j
are located. Now, distance of point P(1) from origin will be - [tex]\sqrt{1+1}=\sqrt{2}[/tex] and that of point P(2) from origin will be - [tex]\sqrt{(-1)^{2} +(1)^{2} } =\sqrt{2}[/tex]
Hence, yes it is possible for two objects be at the same distance from a single point but be in different positions.
To solve more questions on Reference frames, visit the link below-
https://brainly.com/question/9860845
#SPJ2
During a laboratory experiment, the temperature of the gas in a balloon is varied and the
volume of the balloon is measured.
A)
Which quantity is the independent variable?
B)
Which quantity is the dependent variable?
Answers
B. The DV is the volume of the balloon.
This is because the temperature of the gas is the variable being manipulated in the experiment (Independent) and the volume is changing based on the shifts of the temperature (thus volume is Dependent).
Which force results from charged particles
Answers
Hope that helped.
Answer:
electromagnetic force
Explanation:
Starting with a constant velocity of 45 km/h, a car accelerates for 35 seconds at an acceleration of 0.45 m/s2 . What is the velocity of the car at the end of the period of 35 seconds of acceleration?
Answers
Answer:
28.3 m/s
Explanation:
Vi = 45 Km/h = 12.5 m/s
Vf - Vi = at
Vf -12.5 = 0.45(35)
Vf= 28.3 m/s
At a picnic, there is a contest in which hoses are used to shoot water at a beach ball from three different directions. As a result, three forces act on the ball, F1, F2, and F3. The magnitudes of F1 and F2 are F1=50.0N and F2=90.0N. F1 acts under the angle of 60degrees with respect to the x axis and F2 is directed along the x-axis. Find the magnitude and direction of F3 such that the resultant force acting on the ball is zero.
Answers
Answer:
F₃ = 122.88 N
θ₃ = 20.63°
Explanation:
First we find the components of F₁:
For x-component:
F₁ₓ = F₁ Cos θ₁
F₁ₓ = (50 N) Cos 60°
F₁ₓ = 25 N
For y-component:
F₁y = F₁ Sin θ₁
F₁y = (50 N) Sin 60°
F₁y = 43.3 N
Now, for F₂. As, F₂ acts along x-axis. Therefore, its y-component will be zero and its x-xomponent will be equal to the magnitude of force itself:
F₂ₓ = F₂ = 90 N
F₂y = 0 N
Now, for the resultant force on ball to be zero, the sum of x-components of the forces and the sum of the y-component of the forces must also be equal to zero:
F₁ₓ + F₂ₓ + F₃ₓ = 0 N
25 N + 90 N + F₃ₓ = 0 N
F₃ₓ = - 115 N
for y-components:
F₁y + F₂y + F₃y = 0 N
43.3 N + 0 N + F₃y = 0 N
F₃y = - 43.3 N
Now, the magnitude of F₃ can be found as:
F₃ = √F₃ₓ² + F₃y²
F₃ = √[(- 115 N)² + (- 43.3 N)²]
F₃ = 122.88 N
and the direction is given as:
θ₃ = tan⁻¹(F₃y/F₃ₓ) = tan⁻¹(-43.3 N/-115 N)
θ₃ = 20.63°
Read the elapsed time on the stopwatch and answer the questions.
In which digit is there the least amount of confidence?
How many significant figures does this measurement have? I need help quick
Answers
Answer:
1.7
2.4
Explanation:
Answer:
1.7
2.4
Explanation:
A rock is dropped (from rest) off a bridge over the Merrimack River. The falling rock
accelerates at 10 m/s2 downward. If it takes 2.5 seconds before a splash is heard,
approximately how high is the bridge?
Answers
Answer:
31.25 meters or ~31 meters approximately
Explanation:
Let's see which of the 5 variables we are given since this is a constant acceleration problem.
[tex]v_i \ \ \ \ \ \ t \\ v_f \ \ \ \ \ \triangle x \\ a[/tex]We want to find the height of the bridge, aka the vertical displacement of the rock. Let's set the upwards direction to be positive and the downwards direction to be negative.
We are told that the acceleration is 10 m/s² downward, so we have a = -10 m/s².
We are also told that the time it takes the rock to hit the water is 2.5 seconds. Time is the same regardless of the x- or y- direction, so we can say that t = 2.5 seconds.
Now, we aren't told this directly, but we can figure out that the velocity in the y-direction is 0 m/s, since the rock is dropped from rest off the bridge. Therefore, [tex]v_i=0 \frac{m}{s}[/tex].
We want to find the vertical displacement, the height of the bridge, so we can say that [tex]\triangle x= \ ?[/tex]
We have 4 out of 5 variables:
[tex]v_i,\ a, \ t, \ \triangle x[/tex]Look through the constant acceleration equations to see which equation has all 4 of these variables. You should come up with this one (no final velocity):
[tex]x_f=x_i+v_it+\frac{1}{2}at^2[/tex]Subtract [tex]x_i[/tex] from both sides of the equation to get:
[tex]\triangle x=v_it+\frac{1}{2}at^2[/tex]Substitute in our known variables and solve for delta x.
[tex]\triangle x=(0\frac{m}{s})(2.5s) + \frac{1}{2} (-10\frac{m}{s^2})(2.5s)^2[/tex]0 m/s multiplied by 2.5 s is 0, so we have:
[tex]\triangle x =\frac{1}{2} (-10)(2.5)^2[/tex]Evaluate the exponent first and multiply the terms together.
[tex]\triangle x =(-5)(6.25)[/tex] [tex]\triangle x =-31.25[/tex]The vertical displacement is -31.25 meters from the rock's starting position, so we can say that the height of the bridge is 31.25 meters, which is approximately 31 meters tall.
Answer:
31 meters
hope it help you
thanks for free points.........
You are working as an intern for a meteorological laboratory. You are out in the field taking measurements from a balloon that is carrying equipment designed to measure electric fields in the atmosphere. Your supervisor has asked you to determine the average volume charge density at a certain height in the air. When the balloon is at an altitude of 500 m above the ground, the electric field is measured to be 160 N/C directed downward. At 800 m above the ground, the electric field is 120 N/C downward.
(a) Determine the average volume charge density (in C/m3) in the layer of air between these two elevations. (Enter the magnitude.)
(b) Is this layer of air positively or negatively charged?
positively charged
negatively charged
Answers
Answer:
a. -6.99 × 10³⁰ C/m³ b. The layer of air is negatively charged.
Explanation:
With E₁ = electric field at 500 m above the ground = 160 N/C (it is negative since it is directed downwards).
Also, with E₂ = electric field at 800 m above the ground = 120 N/C (it is negative since it is directed downwards).
The total flux, Ψ = ∫E.dA = E₁dAcosθ + E₂dAcosθ
For the 800 m surface E is parallel to dA, that is = 0° and For the 500 m surface E is anti-parallel to dA, that is = 180°
Ψ = ∫E₁dAcos180° + ∫E₂dAcos0°
= -∫E₁dA + ∫E₂dA
= -E₁∫dA + E₂∫dA
= -E₁4πR² + E₂4πR²
= (-E₁ + E₂)4πR² where R = radius of earth = 6.4 × 10⁶ m
= (-160 N/C + 120 N/C)4π(6.4 × 10⁶ m)²
= - 40 N/C)4π(6.4 × 10⁶ m)²
= -20588.74 × 10¹² C
= -2.058874 × 10¹⁶ C
≅ -2.06 × 10¹⁶ Nm²/C.
The since charge, Q = Ψ/ε₀, the total charge through the area is thus
Q = Ψ/ε₀
= -2.06 × 10¹⁶ Nm²/C ÷ 8.854 × 10⁻¹² F/m
= -0.233 × 10²⁸ C/m²
= -2.33 × 10²⁸ C/m².
So, the charge in the volume = charge net charge of surface × width of volume. So the charge in the volume Q' = QΔh = Q(h₂ - h₁) where h₁ = 500 m and h₂ = 800 m
Q' = Q(h₂ - h₁)
= -2.33 × 10²⁸ C/m²(800 m - 500 m)
= -2.33 × 10²⁸ C/m²(300 m)
= -699 × 10²⁸ C/m³
= -6.99 × 10³⁰ C/m³
b. Since Q' = -6.99 × 10³⁰ C/m³, the layer of air is negatively charged.
a ball is rolling ar 4.80m/s over level ground when it encounters a ramp which gives it an acceleration of -0.875m/s^{2. if the ramp is 0.750m long, what is the final velocity of the ball when it reaches the top of the ramp?
Answers
Answer:
4.66m/s
Explanation:
Given parameters:
Initial velocity = 4.8m/s
Acceleration = -0875m/s²
Length of the ramp = 0.75m
Unknown:
Final velocity = ?
Solution:
To solve this problem, we apply the right motion equation;
V² = U² + 2aS
V is the final velocity
U is the initial velocity
a is the acceleration
S is the distance = length of ramp
Insert the parameters;
V² = 4.8² + 2(-0.875)0.75
V² = 23.04 - 1.31
V² = 21.73
V = √21.73 = 4.66m/s
if a gas produced, most likely a ______ reaction took place
Answers
Answer:
if a gas produced, most likely a chemical reaction took place
Explanation:
Answer:
if a gas produced, most likely a Chemical reaction took place
Explanation:
hope this helps and have a good day <3
SILVER PACKAGE
The work done in lifting a 10 kg load of bricks to the top of a building 20 m high is (g = 9.8 ms-2
a) 98
b) 200 J
c) 980
d) 1960)
Answers
U=10*9.8*20
U=1960
Answer is D
(Need Help) (ASAP)
You are at the Grand canyon standing at the edge of a ledge 1,857 m high. you have a mass of 61 kg you decide to take a selfie to share with your science teacher when you get home witch causes you to wonder...
a. How much gravitational potential energy do you have standing on the edge of this cliff?
b. If you were to trip and fall mid selfie, your stored potential energy would be converted to kinetic energy, as you are in motion period assume that all of the GPU calculated in part A would be converted to kinetic energy when you fall period if so, how fast would you be feeling?
Answers
Answer: Considering the gravitational field strength being 9.8...
A) 1,120,875J
B) 191.70m/s (2 DP)
Explanation:
explained in pic
You are at the Grand canyon standing at the edge of a ledge 1,857 m high. you have a mass of 61 kg you decide to take a selfie to share with your science teacher when you get home witch causes you to wonder,
a. The gravitational potential energy you have standing on the edge of this cliff is 1,120,875J.
b. If you were to trip and fall mid selfie, your stored potential energy would be converted to kinetic energy, as you are in motion period assume that all of the GPU calculated in part A would be converted to kinetic energy when you fall period if so, it was felt to be fast as 191.70m/s.
What is Gravitational Potential Energy?
Gravitational potential energy is the potential energy with respect to the gravitational force. To possess gravitational potential energy, the object to be placed in a position in the gravitational field.
According to the question,
Gravitational potential energy = mgh
As given here, h = 1857 m
m = 61
Substituting the given formula,
Gravitational potential energy = 61 × 9.8 × 1875
=1,120,875 J.
Here, As Gravitation potential energy gained, the Kinetic energy lost.
So, Kinetic Energy K.E = 1,120,875 J.
As we know the formula,
K.E = 1/2 mv²
v² =K.E / (1/2 m)
= 1,120,875 × 2 / 61
v² =36,750
v = [tex]\sqrt{36750}[/tex]
= 191.702 m/s.
The speed was calculated as 191.702 m/s.
Thus,
a. The gravitational potential energy you have standing on the edge of this cliff is 1,120,875J.
b. If you were to trip and fall mid selfie, your stored potential energy would be converted to kinetic energy, as you are in motion period assume that all of the GPU calculated in part A would be converted to kinetic energy when you fall period if so, it was felt to be fast as 191.70m/s.
Learn more about Gravitational potential energy,
https://brainly.com/question/8822715
#SPJ5
The radius of Mars is 3397 km; and its mass is 6.42x10²³ kg. What is the acceleration due to gravity at an altitude of 485 km above the surface of Mars?
Answers
Answer:nfeergnjknrtgrth
Explanation:
Answer:
F = GMm/r^2
MA = GMm/r^2
A = GM/r^2
A = (6.67 * 10^-11)(6.42 * 10^23) / (3.37 * 10^6)^2
A = 3.77 m/s^2
Explanation:
Can anyone know what is UV rays
Answers
Answer:
I know this need u in online class LOL
Explanation:
Ultraviolet is a form of electromagnetic radiation with wavelength from 10 to 400 nm, shorter than that of visible light, but longer than X-rays. UV radiation is present in sunlight, and constitutes about 10% of the total electromagnetic radiation output from the Sun.
A toy train engine is rolling freely at a constant speed on a level piece of track. The train engine
collides with a stationary truck, and joins with it. Before the collision the train engine is travelling at
0.30 m/s, and has a mass of 700g. If the stationary truck has as mass of 400g. calculate the speed
of the joined engine and truck immediately after the collision.
(PLEASE answer with working).
Answers
Answer:
v₃ = 0.19 [m/s]
Explanation:
To solve this problem we must use the principle of conservation of the linear momentum, which is defined as the momentum before the collision is equal to the momentum after the collision.
ΣPbefore = ΣPafter
[tex]P=m*v[/tex]
P = momentum [kg*m/s]
m = mass [kg]
v = velocity [m/s]
Let's imagine that the toy train moves to the right, this movement is taken as positive.
[tex](m_{1}*v_{1})+(m_{2}*v_{2})= (m_{1}+m_{2})*v_{3}[/tex]
where:
m₁ = mass = 700 [g] = 0.7 [kg]
v₁ = velocity = 0.3 [m/s]
m2 = mass = 400 [g] = 0.4 [kg]
v₂ = 0 (stationary truck, there is no movement)
v₃ = final velocity of the joined engine and truck.
Now replacing:
[tex](0.7*0.3)+(0.4*0)= (0.7+0.4)*v_{3}\\0.21 = 1.1*v_{3}\\v_{3}= 0.19 [m/s][/tex]
The pressure of liquid varies as per
its depth
Answers
Answer:
Yes.
Explanation:
The pressure varies as per the depth of the container
distinguish between uniform and non uniform velocity??
Answers
Answer:
UNIFORM VELOCITY :body is said to have uniform velocity if it covers equal distance in equal intervals of time in a particular direction, however, the time intervals may be small. ... Examples of the body moving with variable
Explanation:
NON UNIFORM VELOCITYWhen an object covers unequal distances in equal intervals of time in a specified direction, or if the direction of motion changes, it is said to be moving with a non-uniform or variable velocity. e.g., revolving fan at a constant speed has variable velocity.
State the career function of mining engineering
Answers
Answer:Mining engineers are responsible for the effective, safe and profitable operation of mining undertakings. They are mining experts and engineers and have a background in geology as well as civil, mechanical and electrical engineering.
Explanation:
What is a Super Massive Black Hole?
Answers
Answer:
I dont really know much but i know that it swallow anything it comes across in space.
15. Sandra decided to talk a walk at her neighborhood park. She walks 20 meters
east, 40 meters west, and finally 50 meters east. What is her total distance
and displacement, respectively?
Answers
Answer:
Long question good luck:)..............
Explanation:
There is an attachment. There is an attachment on here.
Answers
Answer:
5 i think
Explanation:
Please help!! Tell me the explanation!
Answers
Answer:
it will sink
Explanation:
because it is a higher density than water which is 1.0gm/cm^3