Answer: do not know how to answer this
Explanation:
1. Determine the electron-domain geometry and molecular geometry for each of the following.a. SBr2b. PI4+c. IBr2−2. The following three compounds all have the same general formula, XF4. Compare the electron-domain geometries of these three compounds and explain what characteristic(s) of the central atom causes differences in geometry.a. SiF4:b. SeF4:c. XeF4:
Answer:
SBr2
Electron geometry-tetrahedral; molecular geometry-trigonal pyramidal
PI4+
Electron geometry-tetrahedral; moleculargeometry-tetrahedralr
IBr2
Electron geometry - tetrahedral ; molecular shape - bent
Explanation:
We have to carefully consider the issues in question 2.
First of all, the compound SiF4 is an AX4 molecule so both it's electron domain geometry and molecular geometry are tetrahedral. The molecule has no lone pairs.
For SeF4, the compound is a molecule of the type AX4E, its molecular geometry is trigonal bipyramid but its molecular geometry is see-saw because of the presence of a lone pair of electrons on the central atom, selenium.
For XeF4, the electron domain geometry is octahedral but its molecular geometry is square planar. The molecule is of the type AX4E2 and the two lone pairs are positioned above and below the plane of the square.
which one of these best defines climate
please help i will mark brainlest answer if correct asap
Answer:
Long term condition of the atmosphere
Explanation:
I think this is right.
I hope this helps! (✿◕‿◕✿)
What two particles make up matter?
Answer:
Protons,electrons,and neutrons make up matter
Explanation:
i studied this so hope it helps
Aqueous solutions of calcium chloride and sodium hydroxide are mixed together, forming solid calcium hydroxide and aqueous sodium chloride. Write the balanced chemical equation for the reaction. Phases are optional.
Answer:
CaCl₂ (aq) + 2NaOH (aq) —> Ca(OH)₂ (s) + 2NaCl (aq)
Explanation:
The equation for the reaction is given below:
CaCl₂ (aq) + NaOH (aq) —> Ca(OH)₂ (s) + NaCl (aq)
The above equation can be balance by as follow:
CaCl₂ (aq) + NaOH (aq) —> Ca(OH)₂ (s) + NaCl (aq)
There are 2 atoms of Cl on the left side and 1 atom on the right side. It can be balance by putting 2 in front NaCl as shown below:
CaCl₂ (aq) + NaOH (aq) —> Ca(OH)₂ (s) + 2NaCl (aq)
There are 2 atoms of Na on the right side and 1 atom on the left side. It can be balance by putting 2 in front of NaOH as shown below:
CaCl₂ (aq) + 2NaOH (aq) —> Ca(OH)₂ (s) + 2NaCl (aq)
Now, the equation is balanced.
liquid containing a mixture of neon and xenon was cooled down. One gas solidified at -249 °C and the other at –112 °C. Identify which noble gas solidified at -249 °C and which at -112 °C. Justify your answer.
Answer:
The noble gases (Group 18) are located in the far right of the periodic table and were previously referred to as the "inert gases" due to the fact that their filled valence shells (octets) make them extremely nonreactive. The noble gases were characterized relatively late compared to other element groups.
The History
The first person to discover the noble gases was Henry Cavendish in the late 180th century. Cavendish distinguished these elements by chemically removing all oxygen and nitrogen from a container of air. The nitrogen was oxidized to NO2 by electric discharges and absorbed by a sodium hydroxide solution. The remaining oxygen was then removed from the mixture with an absorber. The experiment revealed that 1/120 of the gas volume remained un-reacted in the receptacle. The second person to isolate, but not typify, them was William Francis (1855-1925). Francis noted the formation of gas while dissolving uranium minerals in acid.
Argon
In 1894, John William Strutt discovered that chemically-obtained pure nitrogen was less dense than the nitrogen isolated from air samples. From this breakthrough, he concluded that another, unknown gas was present in the air. With the aid of William Ramsay, Strutt managed to replicate and modify Cavendish's experiment to better understand the inert component of air in his original experiment. The researchers' procedure differed from the Cavendish procedure: they removed the oxygen by reacting it with copper, and removed the nitrogen in a reaction with magnesium. The remaining gas was properly characterized and the new element was named "argon," which originates from the Greek word for "inert."
Helium
Helium was first discovered in 1868, manifesting itself in the solar spectrum as a bright yellow line with a wavelength of 587.49 nanometers. This discovery was made by Pierre Jansen. Jansen initially assumed it was a sodium line. However, later studies by Sir William Ramsay (who isolated helium on Earth by treating a variety of rare elements with acids) confirmed that the bright yellow line from his experiment matched up with that in the spectrum of the sun. From this, British physicist William Crookes identified the element as helium.
Neon, Krypton, Xenon
These three noble gases were discovered by Morris W. Travers and Sir William Ramsay in 1898. Ramsay discovered neon by chilling a sample of the air to a liquid phase, warming the liquid, and capturing the gases as they boiled off. Krypton and xenon were also discovered through this process.
Radon
In 1900, while studying the decay chain of radium, Friedrich Earns Dorn discovered the last gas in Group 18: radon. In his experiments, Dorn noticed that radium compounds emanated radioactive gas. This gas was originally named niton after the Latin word for shining, "nitens". In 1923, the International Committee for Chemical Elements and International Union of Pure Applied Chemistry (IUPAC) decided to name the element radon. All isotopes of radon are radioactive. Radon-222 has the longest half-life at less than 4 days, and is an alpha-decay product of Radium-226 (part of the U-238 to Pb-206 radioactive decay chain).
The Electron Configurations for Noble Gases
Helium 1s2
Neon [He] 2s2 2p6
Argon [Ne] 3s2 3p6
Krypton [Ar] 3d10 4s2 4p6
Xenon [Kr] 4d10 5s2 5p6
Radon [Xe] 4f14 5d10 6s2 6p
Explanation:
Assuming constant pressure, rank these reactions from most energy released by the system to most energy absorbed by the system, based on the following descriptions:
Surroundings get colder and the system decreases in volume.
Surroundings get hotter and the system expands in volume.
Surroundings get hotter and the system decreases in volume.
Surroundings get hotter and the system does not change in volume.
A mole of X reacts at a constant pressure of 43.0 atm via the reaction.
X(g)+4Y(g)→2Z(g), ΔH∘=−75.0 kJ
Also assume that the magnitude of the volume and temperature changes are similar among the reactions. Rank from most energy released to most energy absorbed. To rank items as equivalent, overlap them. View Available Hint(s)
Answer:
The options are
A.Surroundings get colder and the system decreases in volume.
B.Surroundings get hotter and the system expands in volume.
C.Surroundings get hotter and the system decreases in volume.
D.Surroundings get hotter and the system does not change in volume.
From the Most energy released to the most absorbed , the order is
B. Surroundings get hotter and the system expands in volume.
D. Surroundings get hotter and the system does not change in volume.
C. Surroundings get hotter and the system decreases in volume.
A. Surroundings get colder and the system decreases in volume.
Soil is an example of a:
a. solution
b. heterogeneous mixture
c. solid solution
Answer:
Heterogeneous mixture
Explanation:
Soil is composed of small pieces of a variety of materials, so it is a heterogeneous mixture.
23994Pu + 10n → BCBa + 9138Sr + 3 10n
B=??
a
150
b
100
c
140
d
146
Answer:
the answer to this question is c 140
A graduated cylinder is filled to an initial volume of 25mL. A solid object is dropped into the graduated cylinder. The final volume of the graduated cylinder is 60mL. The mass of the object is 140g. What is the density of the solid object?
Answer:
The answer is 4 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\ [/tex]
volume = final volume of water - initial volume of water
volume = 60 - 25 = 35 mL
From the question we have
[tex]density = \frac{140}{35} \\ [/tex]
We have the final answer as
4 g/mLHope this helps you
What is the particle behavior of an liquid?
Answer: The particles are moving fast but close together.
Answer:
its in the explanation.
Explanation:
1.In liquids, particles are quite close together and move with random motion throughout the container. Particles move rapidly in all directions but collide with each other more frequently than in gases due to shorter distances between particles.
2.It assumes the shape of the part of the container which it occupies particles can move/slide past one another.
Hope this helps. :)
What do you need to measure the amount of energy in food
Answer:
u measure how much power it has
Explanation:
for example u can power a light bulb woth it if u can it was 100eg energy
In chemistry, one often uses a unit of charge known as the Faraday, F, which has the magnitude of the charge of 1 mole of electrons. How many faradays of charge does that correspond to
Answer:
1 Faraday
Explanation:
This question seeks to test proper understanding of Faraday's second law of electrolysis which states when the same quantity electricity passes through a solution of different electrolytes, the mass of the substance deposited is directly proportional to there chemical equivalence.
This law hints at the charges of ions being the chemical equivalence and also been represented as the unit for the quantity of electricity in faraday, F. Hence, a metal with the charge of 1+ can be displaced by 1F (which is equal to 96, 500 coloumbs). This charge also represents one molecule of electron, thus 1 faraday corresponds to one mole of electrons.
NOTE: It should be noted that a metal with the charge of 2+ can be displaced by 2F and so on.
PLEASE HELP!!
There are 5.5 L of a gas present at -38.0 C. What is the temperature if the volume of the gas has changed to 1.30 L?
Answer:
The answer is 55.54 KExplanation:
In order to find out the final temperature we use the formula for Charles's law which is
[tex] \frac{V_1}{T_1} = \frac{V_2}{T_2} \\ [/tex]
where
V1 is the initial volume
T1 is the initial temperature in Kelvin
V2 is the final volume
T2 is the final temperature in Kelvin
Since we are finding the final temperature
[tex]T_2 = \frac{V_2T_1}{V_1} \\ [/tex]
rom the question
V1 = 5.5 L
T1 = -38°C = -38 + 273 = 235 K
V2 = 1.30 L
We have
[tex]T_2 = \frac{1.30 \times 235}{5.5} = \frac{305.5}{5.5} \\ = 55.545454...[/tex]
We have the final answer as
55.54 KHope this helps you
What are the signs that you are getting nervous 18 POINTS )
What processes are related to metamorphism
Answer:
Metamorphism is the change of minerals or geologic texture (distinct arrangement of minerals) in pre-existing rocks (protoliths), without the protolith melting into liquid magma (a solid-state change). The change occurs primarily due to heat, pressure, and the introduction of chemically active fluids.
Explanation:
i hope this helps :)
what particular distribution you share in earth?
Answer:
trees
Explanation:
we plant trees hindi sure kung tama to hihi
Predict which of the following metals reacts with hydrochloric acid.
Check all that apply.
-Sn
-Hg
-Cr
-Ni
Answer:
Pb, Cr, Fe
Explanation:
The metals that can react with hydrochloric acid are; Sn, Cr and Ni.
The electrochemical series shows the reactivity of elements. An element can only replace another element in solution when that element is higher in the electrochemical series.
The metals that can replace hydrogen in a solution of hydrochloric acid must be metals that are above hydrogen in the electrochemical series. These metals are; Sn, Cr and Ni. Hg is a noble metal hence it does not replace hydrogen in an acid solution.
Learn more: https://brainly.com/question/25249351
where in water is being converted into a gaseous form?
evaporation
condensation
transportation
precipitation
Answer:
It's called Evaporation.
The natural abundance for boron isotopes is 19.9% 10B and 80.1%
11B Calculate boron's atomic mass.
Answer:
10.801 amu
Explanation:
From the question given above, the following data were obtained:
Isotope A (¹⁰B):
Mass of A = 10
Abundance (A%) = 19.9%
Isotope B (¹¹B):
Mass of B = 11
Abundance (B%) = 80.1%
Atomic mass of Boron =?
The atomic mass of boron can be obtained as illustrated below:
Atomic mass = [(Mass of A × A%)/100] + [(Mass of B × B%)/100]
= [(10 × 19.9)/100] + [(11 × 80.1)/100]
= 1.99 + 8.811
= 10.801 amu
Thus, the atomic mass of boron is 10.801 amu
The atomic mass of boron with natural abundance of 19.9% of 10 B and 80.1% of 11 B is 10.801 amu
Boron has 2 isotopes.
First isotopes
mass = 10
% abundance = 19.9%
Second Isotopes
mass = 11
% abundance = 80.1%
Therefore,
Atomic mass = (19.9% of 10) + (80.1% of 11)
Atomic mass = (19.9 / 100 × 10) + (80.1 / 100 × 11)
Atomic mass = 199 / 100 + 881.1 / 100
Atomic mass = 1.99 + 8.811
Atomic mass = 10.801
Atomic mass = 10.801 amu
read more: https://brainly.com/question/14440832?referrer=searchResults
3 points
18) A student determines the density of gold to be 20.9g/L. The true
density of gold is 19.30g/L. What is the student's percent error?round
answer to 2 significant figures *
Answer:
The answer is 8.29 %Explanation:
The percentage error of a certain measurement can be found by using the formula
[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]
From the question
actual density = 19.30g/L
error = 20.9 - 19.3 = 1.6
We have
[tex]p(\%) = \frac{1.6}{19.3} \times 100 \\ = 8.290155440...[/tex]
We have the final answer as
8.29 %Hope this helps you
Which of these is the term for the rate of flow of energy in a circuit?
velocity
electricity
resistance
current
iron (III) oxide pentahydrate formula
Answer:
Molecular Formula Fe2O12S3·5H2O
IUPAC Name iron(3+);tri sulfate;pentahydrate
Explanation:
If 1.02 g of nickel reacted with 750. mL of 0.112 M hydrobromic acid, how much of each will be present at the end of the reaction if you captured the gas in a 2.50 L vessel at 30 C
Answer:
35.1% is percent yield
Explanation:
Full question: Assume no volume change. If you formed 0.0910 atm of gas, what is the percent yield?
The reaction that is occurring is:
Ni + 3HBr → NiBr₃ + 3/2H₂(g)
First, we will determine moles of Ni and HBr to determine limiting reactant and theoretical yield
Using ideal gas law, we can determine the moles of hydrogen formed. Thus, we can find percent yield:
Moles Ni (Molar mass: 58.69g/mol):
1.02g * (1mol / 58.69g) = 0.01738moles Ni
Moles HBr:
0.750L * (0.112mol/L) = 0.084 moles of HBr.
For a complete reaction of the 0.084 moles of HBr you need:
0.084mol HBr * (1 mole Ni / 3 moles HBr) = 0.028 moles of Ni.
As there are just 0.01738 moles of Ni, the Ni is limiting reactant. Assuming a theoretical yield, moles of H₂ produced are:
0.01738moles Ni * (3/2 H₂ / 1 mol Ni) = 0.02607 moles H₂
Now, moles of H₂ produced are:
PV = nRT
PV/RT = n
Where P is pressure (0.0910atm)
V is volume (2.50L)
R is gas constant (0.082atmL/molK)
T is absolute temperature in Kelvin (30°C + 273.15 = 303.15K)
And n are moles
PV/RT = n
0.0910atm*2.50L/0.082atmL/molK*303.15K = n
0.00915 moles = n
And percent yield (Produced moles / Theoretical moles * 100) is:
0.00915 moles / 0.02607moles =
35.1% is percent yieldYou need to make 700 mL of a 2.8 M KOH solution. How many grams of KOH should you measure out to make the solution?
Please show steps solution for this question to get the answer.
Answer:
The answer is 109.76 gExplanation:
In order to find out the mass of KOH to be used we use the formula
m = c × M × vwhere
m is the mass
c is the concentration in mol/dm³
M is the molar mass
v is the volume in dm³
From the question
c = 2.8 M
v = 700 mL = 0.7 dm³
Mr( K) = 39 , Mr(O) = 16 , Mr(H) = 1
we have
Molar mass of KOH = 39 + 16 + 1
= 56 g/mol
So we have
m = 2.8 × 56 × 0.7
We have the final answer as
109.76 gHope this helps you
An insulated container is used to hold 47.0 g of water at 23.5°C. A sample of copper weighing 10.3 g is placed in a dry test tube and
heated for 30 minutes in a boiling water bath at 100.0°C. The heated test tube is carefully removed from the water bath with laboratory
tongs and inclined so that the copper slides into the water in the insulated container. Given that the specific heat of solid copper is
0.385 J/(g.°C), calculate the maximum temperature of the water in the insulated container after the copper metal is added.
Answer:
[tex]T_f=25.0\°C[/tex]
Explanation:
Hello.
In this case, considering that the sample of hot copper is submerged into the water and the container is isolated, the heat lost by the copper is gained by the water so we can write:
[tex]Q_{Cu}=-Q_w[/tex]
In terms of mass, specific heat and temperature we write:
[tex]m_{Cu}C_{Cu}(T_f-T_{Cu})=-m_wC_w(T_f-T_w)[/tex]
Whereas the final temperature is the same for both copper and water because they are in contact until thermal equilibrium is reached. In such a way, the required maximum temperature no more than the equilibrium temperature and is computed as shown below:
[tex]T_f=\frac{m_{Cu}C_{Cu}T_{Cu}+m_wC_wT_w}{m_{Cu}C_{Cu}+m_wC_w}[/tex]
Thus, plugging the given data in the formula, we obtain:
[tex]T_f=\frac{10.3g*0.385\frac{J}{g\°C}*100\°C +47.0g*4.184\frac{J}{g\°C}*23.5\°C }{10.3g*0.385\frac{J}{g\°C}+47.0g*4.184\frac{J}{g\°C}}\\\\T_f=25.0\°C[/tex]
Which is a small change considering the initial one, because the mass of water is greater than the mass of copper as well as for the specific heats.
Best regards!
The maximum temperature of the water in the insulated container after the copper metal is added is 25 °C
From the question given above above, the following data were obtained:
Mass of water (Mᵥᵥ) = 47 g
Temperature of water (Tᵥᵥ) = 23.5°C
Specific heat capacity of water (Cᵥᵥ) = 4.184 J/gºC
Mass of copper (M꜀) = 10.3 g
Temperature of copper (M꜀) = 100 °C
Specific heat capacity of copper (C꜀) = 0.385 J/gºC
Equilibrium temperature (Tₑ) =?The equilibrium temperature of the mixture can be obtained as follow:
Heat loss by copper = Heat gained by water
Q꜀ = Qᵥᵥ
M꜀C꜀(M꜀ – Tₑ) = MᵥᵥCᵥᵥ(Tₑ– Mᵥᵥ)
10.3 × 0.385 (100 – Tₑ) = 47 × 4.184 (Tₑ – 23.5)
3.9655 (100 – Tₑ) = 196.648 (Tₑ – 23.5)
Clear bracket
396.55 – 3.9655Tₑ = 196.648Tₑ – 4621.228
Collect like terms
396.55 + 4621.228 = 196.648Tₑ + 3.9655Tₑ
5017.778 = 200.6135Tₑ
Divide both side by 200.6135
Tₑ = 5017.778 / 200.613
Tₑ = 25 °CThus, the equilibrium temperature of the mixture is 25 °C. Therefore, the maximum temperature of the water in the insulated container is 25 °C
Learn more: https://brainly.com/question/18250635
17. What is the average atomic mass of the following isotopic mixture - 22.00% of 159.3 g/mole; 78.00% of
161.2g/mole?
The average atomic mass is given by the individual atomic masses of the isotope of the element and its percentage. The average atomic mass of the isotopic mixture is 159.8 g/mole.
What are isotopes?Isotopes are atoms of the same element that have the same number of protons in their nucleus but have a different number of neutrons that alters their atomic masses. The relative abundance of the isotope of the element affects the average atomic mass of the mixture.
The formula for average atomic mass for the mixture of isotopes is given as:
Average atomic mass = ∑ (mass × abundance)
Given,
Abundance of isotope 1 = 22.00 %
Mass of isotope 1 = 159.3 g/mole
Abundance of isotope 2 = 78.00 %
Mass of isotope 2 = 161.2g/mole
Substituting values in the formula of average atomic mass as:
Average atomic mass = isotope 1 (mass × abundance) + isotope 2 (mass × abundance)
= (0.22) × (159.3) + (0.78) × (161.2)
= 34.046 + 125.736
= 159.8 g/mole
Therefore, the average atomic mass of the mixture of the two isotopes is 159.8 g/mole.
Learn more about isotopes and average mass, here:
https://brainly.com/question/2159355
#SPJ2
If an atom has a neutral charge, it must have
Answer:
Proton or electron. I think, not sure.
Explanation:
A proton and an electron have an equal amount but an opposite type of charge. Thus, if an atom contains equal numbers of protons and electrons, the atom is described as being electrically neutral.
eletrons I'm pretty sure
Which of the following describes the properties of noble gases?
They have high boiling points.
They are highly reactive.
They are generally unreactive.
They are solid at room temperature.
Answer:
They are generally unreactive.
Explanation:
Noble gases are typically highly unreactive except when under particular extreme conditions. The inertness of noble gases makes them very suitable in applications where reactions are not wanted.
The statement that describes the properties of noble gases as regards this question is C: They are generally unreactive.
Noble gas can be regarded as a chemical element belongings to group 18 of periodic table.They conduct electricity and they are odourless gas found in little concentration in the atmosphere.One of their famous property is their inactivity, they have low low chemical reactivity and they are insoluble in water. Example is Neon, helium (He).Therefore, option C is correct.
Learn more at:
https://brainly.com/question/7388951?referrer=searchResults
.
How does ionic bond forms?
Answer:
Ionic bond, also called electrovalent bond, type of linkage formed from the electrostatic attraction between oppositely charged ions in a chemical compound. Such a bond forms when the valence (outermost) electrons of one atom are transferred permanently to another atom.
Explanation: i took the same test
Answer:
it forms where a metal element and a non metal element react together to form a now compound
why ice melt into water