Answer:
John Sebastian Bach
Answer:
Johann Sebastian Bach
Explanation:
please tell me if i am wrong! thank you!
Pressure and temperature ______ with depth below Earth’s surface.
Answer:
Pressure increases as you move deeper below earth's surface.
Tempurature increases as you move deeper below earth's surface.
Hope this helps!
Explanation:
Examine the diagram below.
Which of the above objects is moving the fastest?
A.
All 3 objects are moving at the same speed.
B. B
C. C
D. A
Answer:
Correct choice: D. Object A is the fastest
Explanation:
In a distance vs time graph, the distance is plotted vertically, and the time is plotted horizontally.
The diagram shows three graphs of objects A, B, and C.
The graph of A shows the object traveled 12 meters in 3 seconds, for a speed of 12/3= 4 m/s.
The graph of B shows the object traveled 8 meters in 4 seconds for a speed of 8/4=2 m/s.
Finally, the object C travels 4 meters in 4 seconds, for a speed of 4/4= 1 m/s
Thus, the fastest object is A.
Problem 9.23 A uniform-density 8 kg disk of radius 0.21 m is mounted on a nearly frictionless axle. Initially it is not spinning. A string is wrapped tightly around the disk, and you pull on the string with a constant force of 36 N through a distance of 0.9 m. Now what is the angular speed?
Answer:
4.63rad/s
Explanation:
The centripetal force is expressed as;
F = mv²/r
M is the mass of the disk = 8kg
v is the linear speed = wr
r is the radius = 0.21m
Force = 36N
Write the force in term of the angular velocity
F = m(wr)²/r
F = mw²r²/r
F = mw²r
36 = 8w²(0.21)
36 = 1.68w²
w² = 36/1.68
w² = 21.43
w = √21.43
w = 4.63rad/s
Hence the angular speed is now 4.63rad/s
If 0.5 kg of this material is used in a transformer core, how long would it have to operate at a frequency of 60 cps to heat up 1
Answer:
Hello your question is incomplete attached below is the complete question
answer : 49 seconds
Explanation:
considering only Hysteresis loss
we have to calculate the Area affected/under the Hysteresis loss
= volume * area
= 4 * ( 1.5 * 20 ) = 120 tesla. A/m
next we calculate the volume of the material
= mass of material / density
= 500 grams / 7.9 g/cm^3 = 6.33 * 10^-5 m^3
next we calculate the heat lost per cycle
= 6.33 * 10^-5 m^3 * 120 = 0.007596 joules
The total heat required to raise temperature by 1°c
= Cp * ΔT * n
= 3R * n * ΔT = 3(8.314) * 8.95 * 1 = 223.23 Joules
where n = number of moles = 500grams / 55.85 = 8.95moles
ΔT = 1
Therefore the time required to have to operate at a frequency of 60 cps
= Total heat required / heat lost per cycle
=( 223.23 / 0.007596 ) 60 cps
= 489.796 seconds ≈ 49 seconds
A ball is thrown at 20 m/s from the ground upwards at an angle of elevation of 30°. How far away does it land? 35.35 m
Answer:
35.35 m
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 20 m/s
Angle of projection (θ) = 30°
Acceleration due to gravity (g) = 9.8 m/s²
Range (R) =.?
The range (i.e how far away) of the ball can be obtained as follow:
R = u² Sine 2θ /g
R = 20² Sine (2×30) / 9.8
R = 400 Sine 60 / 9.8
R = (400 × 0866) / 9.8
R = 346.4 / 9.8
R = 35.35 m
Therefore, the range (i.e how far away) of the ball is 35.35 m
The Earth's magnetic field is modeled as that of a bar magnet with the geographic poles being Magnetic poles of the bar magnet, Based on our definitions of Magnetic Poles, if you were to go to the Earth's Geographic North Pole, you would be at a Magnetic _______________ of the bar magnet.
Answer:
South pole
Explanation:
In a bar magnet, field lines go from the North Pole to the South Pole (outside the magnet).
As the earth magnetic field lines go from South Pole (geographic) to the North one, this means that the North pole (geographic) really behaves as a South Pole (magnetic).
1. The uniform seesaw is balanced at its center of mass. The smaller boy on the right has a mass of m = 40.0 kg. What is the mass of his friend?
Answer:
Explanation:
Find the complete question attached
Using the principle of moment
Clockwise moment = Anticlockwise moment
AntiClockwise moment = M × 2.0
ACW moment = 2M
Clockwise moment = 40×4
Clockwise moment = 160kgcm
Equate both expression and calculate M
2M = 160
M = 160/2
M = 80kg
Hence the mass of his friend is 80kg
What's the difference between an open cluster and a globular cluster
An open cluster is a group of up to a few thousand stars that were formed from the same giant molecular cloud, and are still loosely gravitationally bound to each other. In contrast, globular clusters are very tightly bound by gravity. ... Open clusters are very important objects in the study of stellar evolution.
N₂ + H₂
NH3
how do i balance this equation?
Answer:
N2 + 3H2 -----> 2NH3
Explanation:
Reactants side:
2 Nitrogen
5 Hydrogen
Products Side:
2 Nitrogen
5 Hydrogen
The epidermis is the top layer of skin compared to the underlying dermis of the
-kin. Using directional terms, where is the epidermis located in relation to the
dermis?
Do
Lateral
Proximal
Superficial
Superior
Answer:
just as rea was situated at a distance in picture and a half dozen years old in his first comment in picture the actor was the first thing he had ever heard about it he reati was the only person who has
Explanation:
plz help you get the best in your house but muje has been in a relationship since the last
Answer:
Although you may not typically think of the skin as an organ, it is in fact made of tissues that work together as a single structure to perform unique and critical functions. The skin and its accessory structures make up the integumentary system, which provides the body with overall protection. The skin is made of multiple layers of cells and tissues, which are held to underlying structures by connective tissue (Figure 5.1.1). The most superficial layer of the skin is the epidermis which is attached to the deeper dermis. Accessory structures, hair, glands, and nails, are found associated with the skin. The deeper layer of skin is well vascularized (has numerous blood vessels) and is superficial to the hypodermics. It also has numerous sensory, and autonomic and sympathetic nerve fibers ensuring communication to and from the brain.
Explanation:
Describe the layers of the skin and the functions of each layer
-Identify the components of the integumentary system
-Describe the layers of the skin and the functions of each layer
-Describe the layers of the epidermis and dermis
-Identify and describe the hypodermis and fascia
-Describe the role of keratinocytes and their life cycle
-Describe the role of melanocytes in skin pigmentation
What is the maximum current flow possible through a 12 Ohm resistor from a 120V source?
Answer:
I=10.0A
Explanation:
V=RI(120)=(12)II=10.0AWhat is the key for a successful relationship? and Why?
Answer:
communication, if you don't talk you'll never know what's going on.
Explanation:
A pilot drops a package from a plane flying horizontally at a constant speed. Neglecting air resistance, when the package hits the ground the horizontal location of the plane will
Complete Question:
A pilot drops a package from a plane flying horizontally at a constant speed. Neglecting air resistance, when the package hits the ground the horizontal location of the plane will
A. be behind the package.
B. be over the package.
C. be in front of the package.
D. depend on the speed of the plane when the package was released.
Answer:
B.
Explanation:
As no other horizontal forces are present, due to the horizontal movement and the vertical one are independent each other (as they are perpendicular), the plane and the package continue moving horizontally at the same speed, so when the package hits the ground (due to the action of gravity in the vertical direction only) the plane will be exactly over the package.
The package hits the ground in such a way that the plane will be exactly over the package.
The given problem is based on the effect of air resistance on the motion of object. The resistive force exerted on any object on account of dust, and other air particles is known as air resistance or simply as air drag.
In the given problem, as no other horizontal forces are present, due to the horizontal movement and the vertical one are independent each other (as they are perpendicular), the plane and the package continue moving horizontally at the same speed.
So when the package hits the ground (due to the action of gravity in the vertical direction only) the plane will be exactly over the package.
Thus, we can conclude that the package hits the ground in such a way that the plane will be exactly over the package.
Learn more about the air drag here:
https://brainly.com/question/14755232
Two protons are a distance 3 10-9 m apart. What is the electric potential energy of the system consisting of the two protons
Answer:
The electric potential energy of the system is 7.87x10⁻²⁰ J.
Explanation:
The electric potential energy is given by:
[tex]E = \int{Fdr} = \frac{Kq_{1}q_{2}}{r}[/tex]
Where:
q₁ = q₂ is the charge of the protons = 1.62x10⁻¹⁹ C
r is the distance = 3x10⁻⁹ m
K: is the electrostatic constant = 9x10⁹ Nm²/C²
[tex] E = \frac{Kq_{1}q_{2}}{r} = \frac{9\cdot 10^{9} Nm^{2}/C^{2}*(1.62 \cdot 10^{-19} C)^{2}}{3\cdot 10^{-9} m} = 7.87 \cdot 10^{-20} J [/tex]
Therefore, the electric potential energy of the system is 7.87x10⁻²⁰ J.
I hope it helps you!
The electric potential energy of the system should be 7.87x10⁻²⁰ J.
Calculation of the electric potential energy:SInce We know that
fdr = kq1q2/r
Here
q₁ = q₂ i.e. is the charge of the protons = 1.62x10⁻¹⁹ C
r should be the distance = 3x10⁻⁹ m
K should be the electrostatic constant = 9x10⁹ Nm²/C²
Now electric potential energy should be
= (9x10⁹ Nm²/C² * 1.62x10⁻¹⁹ C) / 3x10⁻⁹ m
= 7.87x10⁻²⁰ J.
hence, The electric potential energy of the system should be 7.87x10⁻²⁰ J.
learn more about energy here: https://brainly.com/question/17384612
Concerning the work done by a conservative force, which of the following statements, if any, are true? It can always be expressed as the difference between the initial and final values of a potential energy function. It is independent of the path of the body and depends only on the starting and ending points. When the starting and ending points are the same, the total work is zero.
Answer:
It is independent of the path of the body and depends only on the starting and ending points.
Explanation:
In Physics we define a conservative force as a force that is independent of the path of the body and depends only on the starting and ending points.
For conservative forces we can write;
KEi + PEi = KEf +PEf
where;
KEi= initial kinetic energy
PEi= initial potential energy
KEf= final kinetic energy
PEf= final potential energy
This equation is known as the principle conservation of mechanical energy . It applies only to conservative forces where friction is negligible. The term KE + PE is also known as the total mechanical energy of the system.
If the loudness drops to 90 % of its original value in 5.0 s , what is the time constant of the damped oscillation
This question is incomplete, the complete question is;
A gong makes a loud noise when struck. The noise gradually gets less and less loud until it fades below the sensitivity of the human ear. The simplest model of how the gong produces the sound we hear treats the gong as a damped harmonic oscillator. The tone we hear is related to the frequency f of the oscillation, and its loudness is proportional to the energy of the oscillation.
If the loudness drops to 90 % of its original value in 5.0 s , what is the time constant of the damped oscillation
Answer: the time constant of the damped oscillation is 47.44s
Explanation:
Given that;
t = 5.0s
Lets say Ao is the amplitude of initial loudness and later A(t) = 0.9 Ao
EXPRESSION for amplitude is A(t) = Ao e^-t / T
t is time while T is time constant
so
0.9Ao = Ao e^-t / T
0.9 = e^ -t/T
So we take the natural log of both the sides
ln (0.9) = -t/T
-0.1054 = -t/T
0.1054 = t/T
WE now substitute our value of t
0.1054 = t/T
0.1054T = 5.0
T = 5 / 0.1054
T = 47.44s
therefore the time constant of the damped oscillation is 47.44s
Who is the founding father of modern psychology?
Answer:
Sigmund Freud
Explanation:
Answer:
Wilhelm Wundt
Silly Goose falls 1.0 m to the floor. How long does the fall take
Answer:You need to give more explanation sorry
Explanation:
Answer:
4.20 seconds
Explanation:
Supposing that silly goose weighs 69 pounds, we need to start on the math.
Simple maths, truly and really. 69/1=69, of course.
Therefore it will take 4.20 seconds for silly goose to hit the ground. if he is going to be a silly goose though, he can just go in the pond, instead of wasting his time.
A block of mass m begins at rest at the top of a ramp at elevation h with whatever PE is associated with that height. The block slides down the ramp over a distance d until it reaches the bottom of the ramp. How much of its original total energy (in J) survives as KE when it reaches the ground
This question is incomplete, the complete question is;
A block of mass m begins at rest at the top of a ramp at elevation h with whatever PE is associated with that height. The block slides down the ramp over a distance d until it reaches the bottom of the ramp.
How much of its original total energy (in J) survives as KE when it reaches the ground? m = 9.9 kg h = 4.9 m d = 5 m μ = 0.3 θ = 36.87°
Answer:
the amount of its original total energy (in J) that survives as KE when it reaches the ground will is 358.975 J
Explanation:
Given that;
m = 9.9 kg
h = 4.9 m
d = 5 m
μ = 0.3
θ = 36.87°
Now from conservation of energy, the energy is;
Et = mgh
we substitute
Et = 9.9 × 9.8 × 4.9
= 475.398 J
Also the loss of energy i
E_loss = (umg cosθ) d
we substitute
E_loss = 0.3 × 9.9 × 9.8 × cos36.87° × 5
= 116.423 J
so the amount of its original total energy (in J) that survives as KE when it reaches the ground will be
E = Et - E_loss
E = 475.398 J - 116.423 J
E = 358.975 J
When you place leftover food in the refrigerator, what kind of energy do you
decrease in the food?
A. Nuclear energy
B. Electromagnetic energy
C. Thermal energy
D. Chemical energy
By cooling down the food, the thermal energy in the food molecules is reduced.
What is a refridgerator?A refrigerator is an appliance that is commonly used in the home for the purpose of cooling down a substnace especially water and drinks.
Due to the fact that the molecules that compose matter are is in a state of constant random motion, the food molecules contain thermal energy. Hence, by cooling down the food, the thermal energy in the food molecules is reduced.
Learn more about thermal energy: https://brainly.com/question/11278589
A recipe gives the instructions below
After browning the meat pour off fat from the pan to further reduce fat use a strainer.
what type lf separation methods are described in the recipe
A decantation and screening
B distillation and screening
C decantation and centrifugation
D distillation and filtration
Answer:
A. decantation and screening
Explanation:
Decantation is the one of the process of separating the mixture. In this process the precipitated liquid is separated from the solid. According to the given instruction for the recipe, the fat which is in liquid state is separated from meat. In the process of screening, more liquid is separated by placing the mixture on the screen. Here, the gravity plays an important role for the process of separation.
Answer:
a
Explanation:
The Intensity level of a loud saw is 100 db at a distance of 5m. At what distance would the level be 80 db
Answer:
50 m
Explanation:
The relationship between the intensity of sound in dB and distance is given by the formula:
[tex]B_2=B_1+20log(\frac{R_1}{R_2} )\\\\Where \ B_2\ is \ the\ sound\ intensity\ at\ distance\ R_2\ and\\B_1\ is \ the\ sound\ intensity\ at\ distance\ R_1\ \\\\Given\ that: B_1=100\ dB, R_1=5\ m, B_2=80\ dB\\\\B_2=B_1+20log(\frac{R_1}{R_2} )\\\\80=100+20log(\frac{5}{R_2} )\\\\-20=20log(\frac{5}{R_2} )\\\\log(\frac{5}{R_2} )=-1\\\\\frac{5}{R_2}=10^{-1}\\\\\frac{5}{R_2}=0.1\\\\R_2=5/0.1=50\ m[/tex]
Design a tension member and slip-critical splice to carry a factored load of 500 kips. Please use a wide-flange section for the tension member. Please use A572 Gr. 50 steel plates for the splice plates. Please use Group B, A490 bolts for the splice connection. The splice connection should be slip-critical, and have adequate strength after slip occurs as well. Please make any other assumptions you need in order to complete the problem. Provide detailed sketches and drawings for your design.
Answer:
Kindly check the explanation section.
Explanation:
For the design we are asked for in this question/problem there is the need for us to calculate or determine the strength in fracture and that of the yield. Also, we need to calculate for the block shear strength.
From the question, we have that the factored load = 500kips. Also, note that the tension splice must not slip.
Also, the shear force are resisted by friction, that is to say shear resistance = 1.13 × Tb × Ns.
Assuming our db = 3/4 inches, then the slip critical resistance to shear service load = 18ksi(refer to AISC manual for the table).
If db = 7/8 inches, then the shear force resistance for n bolt = 10.2kips, n > 49.6.
The yielding strength = 0.9 × Aj × Fhb= 736 kips > 500
The fracture strength = .75 × Ah × Fhb = 309 kips.
The bearing strength of 7/8 inches bolt at the edge hole and other holes = 46 kips and 102 kips.
Determine the mass m1m1 of block M1M1 for which the two blocks are in equilibrium (no acceleration).
This question is incomplete, the complete question is;
Two blocks, M1M1 and M2,M2, are connected by a massless string that passes over a massless pulley as shown in the figure. M2,M2, which has a mass of 25.0 kg,25.0 kg, rests on a long ramp of angle =25.0∘.θ=25.0∘. Friction can be ignored in this problem.
Determine the mass 1m1 of block M1M1 for which the two blocks are in equilibrium (no acceleration).
Answer:
the mass m1m1 of block M1M1 for which the two blocks are in equilibrium (no acceleration) is 10.57 kg
Explanation:
Given that;
m₂ = 25 kg
θ = 25°
Now at equilibrium, T = m₁g ------------------lets say equ 1
and also T = m₂gsinθ
therefore
m₁g = m₂gsinθ
m₁ = m₂sinθ
so we substitute
m₁ = 25 × sin(25)
m₁ = 25 × 0.4226
m₁ = 10.565 ≈ 10.57 kg
therefore the mass m1m1 of block M1M1 for which the two blocks are in equilibrium (no acceleration) is 10.57 kg
Paragraph/Comprehension type questions.
A body weighs 500gf in air and 300gf when completely immersed in water
36. Find the apparent loss in weight of the body.
1)500gf
2)300gf
3)200gf
4)800gf
37. Find the buoyant force acting on the body
1)500gf
2)300gf
3)200gf
4)800gf
Answer:
1>500gf
1>300gf
its answer
when hydrogen shares electrons with oxygen the outermost shell of the hydrogen atoms are full with how many electrons? and oxygens valence shell is full with how many electrons? because the valence shells of these atoms are full,the atoms are stable.
Answer:
2 and 8
Explanation:
please mark me brainiest I would really appreciate it.
"What will the pressure inside the container become if the piston is moved to the 1.60 L mark while the temperature of the gas is kept constant?"
This question is incomplete, the complete question is;
The Figure shows a container that is sealed at the top by a moveable piston, Inside the container is an ideal gas at 1.00 atm. 20.0°C and 1.00 L.
"What will the pressure inside the container become if the piston is moved to the 1.60 L mark while the temperature of the gas is kept constant?"
Answer:
the pressure inside the container become 0.625 atm if the piston is moved to the 1.60 L mark while the temperature of the gas is kept constant
Explanation:
Given that;
P₁ = 1.00 atm
P₂ = ?
V₁ = 1 L
V₂ = 1.60 L
the temperature of the gas is kept constant
we know that;
P₁V₁ = P₂V₂
so we substitute
1 × 1 = P₂ × 1.60
P₂ = 1 / 1.60
P₂ = 0.625 atm
Therefore the pressure inside the container become 0.625 atm if the piston is moved to the 1.60 L mark while the temperature of the gas is kept constant
According to Newton's first law, which characteristic of a moving object would remain constant if there were no other
forces acting on it?
O size
c
mass
O shape
O speed
Mark this and return
Save and Exit
NIKKI
Submit
What is the approximate weight of a 400 kg object?
Answer:
881.84905 LBS
Explanation:
ThErE :p
3922.66 newtons.
This is an exact amount, to get newtons form kg, multiply by 9.8, or in this case, 10.
This gives you 4000 newtons
I WILL MARK YOU AS BRAINLIEST IF RIGHT
What is the magnitude of the net force acting on this object? And what direction?
Answer:
The magnitude of the net force acting on an object is equal to the mass. and the direction is in 20N
Explanation: